Manual de instrucciones de Elite BK2080

Resumen del contenido incluido en la página 1

OWNER’S
MANUAL
Safety Notice..............2
Assembly & Usage 3-7
Exploded View ..........8
Parts List ..............9-10
Exercise Computer..11
O w n e r’s Manual
This Product is Brought to You by:
IMPORTANT!
Please read all instructions
Thane International, Inc. La Quinta, CA 92253
Thane International, Inc.
carefully before using this
Thane Direct Canada, Inc. Toronto, Ontario
La Quinta, CA 92253
product. Retain this manual
Thane Direct UK Limited Admail ADM3996 London W1T 1ZU
Thane Direct Canad

Resumen del contenido incluido en la página 2

Owner’s Manual Owner’s Manual IMPORTANT SAFETY NOTICE ASSEMBLY INSTRUCTIONS Note the following precaution before assembling or operating the machine. BEFORE you begin: 1. THE MAXIMUM WEIGHT CAPACITY OF THE ORBITREK ELITE IS 275 LBS (125 kgs). Persons whose body weight exceeds this limit should NOT use this machine. 1. Locate a comfortable work site. Assemble your OrbiTrek Elite in an open space with adequate ventilation and lighting. Because the OrbiTrek Elite is portable, to some extent, y

Resumen del contenido incluido en la página 3

Owner’s Manual Owner’s Manual Step 2: Attaching the Spindle Bar Step 1: Attaching front and rear stabilizers Insert the Spindle Bar (No. 38) through the Right Connecting Tube (No. 55) into the main frame, Attach the Front Stabilizer (No. into Left Connecting Tube (No. 24). Put a D Shaper Washer (No. 33) and a Spring Washer (No. 32) 23) and the Rear Stabilizer (No. Fig. 1 10) to the main frame using: on either side of the Spindle Bar and tighten both ends using the Hinge Screws (No. 31). 23 9

Resumen del contenido incluido en la página 4

Owner’s Manual Owner’s Manual Step 3: Tightening the Lock Nuts and Attaching the Pedals Step 5: Connecting the sensor Connect the sensor B1 & B2 as shown in Fig. 5, then install the Tighten the both sides of Lock Nuts 20 26 Fig. 3 computer (No. 37) into the support tube of the main frame (No. 3) before assemblying the pedals. Fig. 5 (No. 36). Attach the Right Pedal (No. 26) and Left 36 Pedal (No. 27) to their respective Pedal Assembly is complete. 19 Tube (No. 19) using: 20 19 BATTERY 4 – Hex

Resumen del contenido incluido en la página 5

Owner’s Manual Owner’s Manual NO. NAME QUANTITY SPEC 1 LEFT HINGE BOLT 1 1/2" EXPLODED VIEW & PARTS LIST 2 BUSHING I 10 28* 16*16 3 LOCK NUT 4 M10 4 STEEL BUSHING 4 28* 14*10 5 CONNECTING TUBE 2 6 SPRING WASHER 2 1/2" 7 LEFT LOCK NUT 1 1/2" 8 ADJUSTABLE END CAP 2 9 CARRIAGE BOLT 4 M8X60 10 REAR STABILIZER 1 50*1.5 35 11 ARC WASHER 4 12 DOMED NUT 4 M8 13 LOCK NUT 4 M8 14 FLAT WASHER 4 Ø8 15 HEX HEAD BOLT 4 M10X55 16 SCREW 2 ST4.2X19 35 17 LEFT HANDLEBAR COVER (L) 1 18 BUSHING 2 4 28* 10*10

Resumen del contenido incluido en la página 6

Owner’s Manual Owner’s Manual EXERCISE COMPUTER 59 NUT 2 M6 60 FIXING BOLT 2 M6*55 61 TENSION KNOB 1 62 NUT 2 M10*1 63 FLYWHEEL 1 SPECIFICATIONS: 64 FLYWHEEL SHAFT 1 65 LITTLE CHAIN WHEEL 1 TIME (TMR)……………......00:00-99:59 66 RIGHT CHAIN COVER 1 67 NUT 1 7/8" 68 SPRING 1 SPEED (SPD)...0.0-99.9KM/HorML/H 69 DOMED NUT 1 M6 70 END CAP 2 71 WOOLLY BLOCK 1 DISTANCE (DST)……….0.00-999.9KM 72 HEX HEAD BOLT 1 M5X30 73 PLASTIC FRAME 1 74 RUBBER 1 CALORIES (CAL)…………….……0-9999KC

Resumen del contenido incluido en la página 7

Owner’s Manual Owner’s Manual Using your Orbitrek Elite will provide you with several benefits. It will improve your physical fitness, This is the stage where you put the effort in. After regular use, the muscles in your legs will become tone your muscles and in conjunction with a calorie controlled diet, help you lose weight. more flexible. Work at your own pace and be sure to maintain a steady tempo throughout. The rate of work should be sufficient to raise your heartbeat into the target zone