Manual de instrucciones de Dimplex Shower

Resumen del contenido incluido en la página 1

Dimp13292-Shower inst aX4 5/5/04 2:08 pm Page 1
SERVICE POLICY/GUARANTEE
In the event of you needing to contact the Dimplex Customer Service Department,
the following procedure should be followed:-
Before telephoning the Dimplex Customer Service Department you should
ensure that you have the model number, power rating, serial number and
1
date of purchase.
The Dimplex Customer Service Department will be able to inform you whether
the fault can be rectified by the provision of a replacement pa

Resumen del contenido incluido en la página 2

Dimp13292-Shower inst aX4 5/5/04 2:08 pm Page 3 DIMENSIONS UNPACKING AND IMPORTANT NOTICES / INSTALLATION SECTION 1 Use of plumbers jointing compounds Unpacking and important notices invalidates the guarantee. Contents Complete all plumbing connections 1 x Shower Unit before making any electrical connections. 1 x Showerhead 1 x Flexible Hose The outlet of the shower unit must only be 1 x Slider Rail Tube connected to the hose and showerhead 1 x Slider Rail Brackets supplied with the unit. Us

Resumen del contenido incluido en la página 3

Dimp13292-Shower inst aX4 5/5/04 2:08 pm Page 5 INSTALLATION INSTALLATION Planning the installation General Plumbing 4) Carefully drill the holes using a 5.5mm masonry drill (note when drilling though 1) Fit an isolating valve to the mains tiles first use a glass or tile drill bit of 6mm Product Positioning Guide water supply so that the shower can diameter to drill a hole through the tile). be serviced. 5) Insert the plugs provided through the LOW AUTO PRESSURE RESET 2) The shower unit

Resumen del contenido incluido en la página 4

Dimp13292-Shower inst aX4 5/5/04 2:08 pm Page 7 INSTALLATION INSTALLATION / FINAL ASSEMBLY AND COMMISSIONING Riser rail The cable should be routed to the shower 2) Fit the flexible hose to the shower unit unit from either the top, bottom or back and remove the showerhead. of the shower unit. This cable should be 1 7 Part the mounting bracket Insert the rail into the bottom hidden from view. 3) Turn the temperature control knob at assembly so that the fixing plate and top brackets and screw

Resumen del contenido incluido en la página 5

Dimp13292-Shower inst aX4 5/5/04 2:08 pm Page 9 FINAL ASSEMBLY AND COMMISSIONING / OPERATION OPERATION / LOOKING AFTER YOUR SHOWER 2) Switch on the electrical supply at the SECTION 4 ‘Low’ setting: LOW AUTO double pole isolating switch, the power Operation This is the low power setting for economy PRESSURE RESET neon on this switch should light. during warmer months or when a COLD ‘Power indicator’: cool shower is required. 3) Start the shower by pressing the ‘Cold’ The power indicator on th

Resumen del contenido incluido en la página 6

Dimp13292-Shower inst aX4 5/5/04 2:08 pm Page 11 LOOKING AFTER YOUR SHOWER / TROUBLESHOOTING / MAINTENANCE TROUBLESHOOTING cleaner may be used on external surfaces speed with which the water flows through SYMPTOM POSSIBLE CAUSE ACTION of the handset. Rub-clean showerheads the unit. It is therefore normal for the water No hot water Power setting is at Cold. Select a heat setting may be rubbed lightly to remove scale as coming out of the shower to change required. Over time build-up of lime