Manual de instrucciones de Code Alarm CATX1WAY

Resumen del contenido incluido en la página 1

Model CATX1WAY
Programming Guide
The keychain transmitters included with the system have been pre-programmed at the factory,
with each button pre-assigned to control a specific function of the system.
th
The system will store codes from up to 8 different transmitters. If a 9 transmitter is
programmed to the system, then the first transmitter programmed to the system will be
erased from the system’s memory.
To program new or additional transmitters, the alarm must be disarmed and out of valet mod

Resumen del contenido incluido en la página 2

Model CATX1WAY Programming Guide Changing the Remote Control Battery The 12-volt alkaline battery supplied in your remote transmitter should last approximately one year, depending on usage. When the battery begins to weaken, you will notice a decrease in range, or the distance from your vehicle that your remote transmitter will operate. Follow the instructions below to change the remote transmitter battery. 1. Insert the edge of a coin into the slot at the side of the remote control. Twist th