Manual de instrucciones de Chauvet Pix

Resúmenes de contenidos

Resumen del contenido incluido en la página 1

User Manual

Resumen del contenido incluido en la página 2

TABLE OF CONTENTS 1. Before You Begin .............................................................................. 3 What Is Included ............................................................................................... 3 Unpacking Instructions ...................................................................................... 3 Claims ........................................................................................................................ 3 Text Conv

Resumen del contenido incluido en la página 3

1. BEFORE YOU BEGIN · COLORband™ PiX · Warranty Card What Is · Power Cord · Quick Reference Guide Included · 2 L-Brackets Unpacking Immediately upon receipt, carefully unpack the product and check the box to make sure you have received all the parts indicated above in good condition. Instructions If the box or contents (the product and included accessories) appear damaged from Claims shipping, or show signs of mishandling, upon receipt notify the carrier immediately,

Resumen del contenido incluido en la página 4

Use on Dimmer Auto Programs x P Product at a Outdoor Use Auto-ranging Power Supply x P Glance Sound-Activated Replaceable Fuse P P DMX User-Serviceable x P Master/Slave P Please read the following Safety Notes carefully before working with the product. The Safety Notes Notes include important safety information about installation, usage, and maintenance. · Always connect the product to a grounded circuit to avoid the risk of electrocution. · Always disconnect th

Resumen del contenido incluido en la página 5

2. INTRODUCTION Overview U-Bracket (x2) Power Out Bracket Adjustment Knob Fuser Holder Power In Microphone 3-pin DMX Connectors Display and Control 5-pin DMX Connectors Buttons Sound Sensitivity Knob Dimensions COLORband™ PiX User Manual Rev. 6 Page 5 of 21

Resumen del contenido incluido en la página 6

3. SETUP The COLORband™ PiX has an auto-ranging power supply and can work with an input AC Power voltage range of 100–240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. The listed current rating indicates the product’s average current draw under normal conditions. Always connect the product

Resumen del contenido incluido en la página 7

The product provides power linking via the IEC outlet located in the back of the unit. See Power Linking the diagram below. Power Linking Diagram st nd rd 1 Product 3 Product 2 Product Other products You can power link up to 11 COLORband™ PiX units on 120 VAC or up to 20 COLORband™ PiX units on 230 VAC. The power-linking diagram shown above corresponds to the North Americ

Resumen del contenido incluido en la página 8

Before mounting the product, read and follow the safety recommendations indicated in Mounting the Safety Notes. The COLORband™ PiX may be mounted in any position; however, make sure adequate Orientation ventilation is provided around the product. · Before deciding on a location for the product, always make sure there is easy Rigging access to the product for maintenance and programming. · Make sure that the structure or surface onto which you are mounting the product can

Resumen del contenido incluido en la página 9

CBB-6 Instructions The CBB-6 works with the COLORband™ PiX Mini (shown below), COLORband™ PiX, and most linear/strip lights. Basic Assembly To assemble the CBB-6 bracket: 1. Unscrew the bracket adjustment knob on the light you wish to attach to the bracket. 2. Align the light to any of the small mounting holes on the CBB-6 (maximum 6 lights). 3. Reattach the bracket adjustment knob to the light. 4. Repeat up to a total of six times with a pair of CBB-6 brackets. The final as

Resumen del contenido incluido en la página 10

4. OPERATION To access the control panel functions, use the four buttons located underneath the Control Panel display. Operation Button Function Press to find an operation mode or to back out of the current menu

option Press to scroll up the list of options or to find a higher value Press to scroll down the list of options or to find a lower value Press to activate a menu option or a selected value Mode Programming Steps Description Men

Resumen del contenido incluido en la página 11

Set the product in DMX mode to control with a DMX controller. Configuration 1. Connect the product to a suitable power outlet. (DMX) 2. Turn the product on. 3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input socket on the product. The COLORband™ PiX has 8 DMX personalities, from a 3-channel mode for basic DMX control to a 36-channel mode with more advanced control. Personalities The COLORband™ PiX uses up to 36 DMX channels in its 36-channe

Resumen del contenido incluido en la página 12

DMX Channel Assignments and Values Channel Function Value Setting 7-CH 1 Red 000 ó 255 0–100% 2 Green 000 ó 255 0–100% 3 Blue 000 ó 255 0–100% 000 ó 015 No function 4 Color Macros 016 ó 255 Color Macros Speed (slow to fast) Speed 000 ó 255 (when CH.6 is from 032–233) 5 000 ó 015 No function Strobe (CH.1-CH.4 only) 016 ó 255 0–30 Hz 000 ó 031 No function 032 ó 063 Pulse effect 0–100% 064 ó 095 Pulse effect 100%–0 096 ó 114 Pulse effect 100%–0–100% 6 Auto Programs 1

Resumen del contenido incluido en la página 13

Channel Function Value Setting Zone 6-CH 1 Red 000 ó 255 0–100% 2 Green 000 ó 255 0–100% 1 3 Blue 000 ó 255 0–100% 4 Red 000 ó 255 0–100% 5 Green 000 ó 255 0–100% 2 6 Blue 000 ó 255 0–100% Channel Function Value Setting Zone 9-CH 1 Red 000 ó 255 0–100% 2 Green 000 ó 255 0–100% 1 3 Blue 000 ó 255 0–100% 4 Red 000 ó 255 0–100% 5 Green 000 ó 255 0–100% 2 6 Blue 000 ó 255 0–100% 7 Red 000 ó 255 0–100% 8 Green 000 ó 255 0–100% 3 9 Blue 00

Resumen del contenido incluido en la página 14

Channel Function Value Setting Zone 12-CH 1 Red 000 ó 255 0–100% 2 Green 000 ó 255 0–100% 1 3 Blue 000 ó 255 0–100% 4 Red 000 ó 255 0–100% 5 Green 000 ó 255 0–100% 2 6 Blue 000 ó 255 0–100% 7 Red 000 ó 255 0–100% 8 Green 000 ó 255 0–100% 3 9 Blue 000 ó 255 0–100% 10 Red 000 ó 255 0–100% 11 Green 000 ó 255 0–100% 4 12 Blue 000 ó 255 0–100% Channel Function Value Setting Zone 18-CH 1 Red 000 ó 255 0–100% 2 Green 000 ó 255 0–100% 1 3 Blue 000 ó

Resumen del contenido incluido en la página 15

Channel Function Value Setting Zone 36-CH 1 Red 000 ó 255 0–100% 2 Green 000 ó 255 0–100% 1 3 Blue 000 ó 255 0–100% 4 Red 000 ó 255 0–100% 5 Green 000 ó 255 0–100% 2 6 Blue 000 ó 255 0–100% 7 Red 000 ó 255 0–100% 8 Green 000 ó 255 0–100% 3 9 Blue 000 ó 255 0–100% 10 Red 000 ó 255 0–100% 11 Green 000 ó 255 0–100% 4 12 Blue 000 ó 255 0–100% 13 Red 000 ó 255 0–100% 14 Green 000 ó 255 0–100% 5 15 Blue 000 ó 255 0–100% 16 Red 000 ó 255 0–100% 17 Green 000 ó 255 0–100% 6

Resumen del contenido incluido en la página 16

Set the product in one of the standalone modes to control without a DMX controller. Configuration · Connect the product to a suitable power outlet. (Standalone) Never connect a product that is operating in any standalone mode (either Static, Auto, or Sound-Active) to a DMX string connected to a DMX controller. Products in standalone mode may transmit DMX signals that could interfere with the DMX signals from the controller. To enable the Static Color mode, do the followi

Resumen del contenido incluido en la página 17

The Master/Slave mode allows a single COLORband™ PiX unit (the master) to control Master/Slave the actions of one or more COLORband™ PiX units (the slaves) without the need of a Mode DMX controller. The master unit will be set to operate in either Automatic or Sound Active mode, while the slave units will be set to operate in Slave mode. Once set and connected, the slave units will operate in unison with the master unit. Configure the units as indicated below. Slave units: 1. Pr

Resumen del contenido incluido en la página 18

5. TECHNICAL INFORMATION Dust build-up reduces light output performance and can cause overheating. This can Product lead to reduction of the light source’s life. To maintain optimum performance and Maintenance minimize wear, clean lighting products at least twice a month. However, be aware that usage and environmental conditions are contributing factors to increasing the cleaning frequency. To clean the product, follow the instructions below: 1. Unplug the product from power.

Resumen del contenido incluido en la página 19

To return a product or request support: · In the U.S., contact CHAUVET® World Headquarters (see Contact Us). RETURNS · In the UK or Ireland, contact CHAUVET® Europe Ltd. (see Contact Us). · In Mexico, contact CHAUVET® Mexico (see Contact Us). · In any other country, DO NOT contact CHAUVET®. Contact your distributor. See www.chauvetlighting.com for distributors outside the U.S., United Kingdom, Ireland, or Mexico. If you live outside the U.S., United Kingdom, Ireland, or Mexico, co

Resumen del contenido incluido en la página 20

WORLD HEADQUARTERS - CHAUVET® CONTACT General Information Technical Support Address:5200 NW 108th Avenue Voice: (954) 577-4455 (Press 4) US Sunrise, FL 33351 Fax: (954) 756-8015 Voice: (954) 577-4455 Email: tech@chauvetlighting.com Fax: (954) 929-5560 Toll free: (800) 762-1084 World Wide Web www.chauvetlighting.com UNITED KINGDOM AND IRELAND - CHAUVET® Europe Ltd. General Information Technical Support Address:Unit 1C Em

Manuales de instrucciones similares

#	Manual de instrucciones	Categoría	Descargar
1	Chauvet SM-150X Manual de instrucciones	Quitanieves	12
2	Agri-Fab 45-0402 Manual de instrucciones	Quitanieves	2
3	Agri-Fab 45-0418 ATV Manual de instrucciones	Quitanieves	1
4	Agri-Fab 45-0418 Manual de instrucciones	Quitanieves	1
5	Alliance Laundry Systems DRYING TUMBLERS 70269501R3 Manual de instrucciones	Quitanieves	2
6	Ariens 924 SNO-THRO 924109 Manual de instrucciones	Quitanieves	60
7	Ariens 921006 - ST1130DLE Manual de instrucciones	Quitanieves	52
8	Ariens 921013 - DELUXE 30 Manual de instrucciones	Quitanieves	141
9	Ariens 921009 ST1130LET Manual de instrucciones	Quitanieves	4
10	Ariens 924 SNO-THRO 924111 Manual de instrucciones	Quitanieves	4
11	Ariens 921005 - ST927LE Manual de instrucciones	Quitanieves	22
12	Ariens 924 SNO-THRO 924108 Manual de instrucciones	Quitanieves	8
13	Ariens 921008 - ST927LET Manual de instrucciones	Quitanieves	5
14	Ariens 921012 - DELUXE 27 Manual de instrucciones	Quitanieves	82
15	Ariens 924071 Manual de instrucciones	Quitanieves	2