Manual de instrucciones de Hotpoint DC 1-14

Resumen del contenido incluido en la página 1

Cycle Process (Charge After Discharge)
Step 1. Push the Start/Select button twice and the Pinnacle will beep twice and will begin discharging
the battery. The orange LED will remain on and the red LED will flash. This means the unit has begun the
cycle mode—charge after discharge.
™
Step 2. After the battery packs are discharged under constant voltage, the charger will beep once and
advance to trickle mode for a short period of time. The orange LED will shut off and the green and red
Pinnacle
L

Resumen del contenido incluido en la página 2

Thank you for purchasing the E-flite™ Pinnacle™ Peak Prediction Charger. The Pinnacle is DC-powered Step 2. Attach the black (negative) banana plug to the black (negative) terminal. Alligator clip adapters and will peak charge and discharge 1–14 (1.2–16.8V) cell Ni-Cd and Ni-MH battery packs. It features are also provided if you choose to power your charger with a 12V hobby battery. Once your charger is a 16-bit microchip CPU controller with a large LCD display indicating capacity, voltage and