Resumen del contenido incluido en la página 1
Model: 201927/201928/201929/
201930/201933/201940
Literature #: 98-1649/07-11
1
Resumen del contenido incluido en la página 2
English. . . . . . . . . . . . . . . . 3 French. . . . . . . . . . . . . . . . 16 Spanish. . . . . . . . . . . . . . . 30 German. . . . . . . . . . . . . . . 44 Italian. . . . . . . . . . . . . . . . . 58 Portuguese. . . . . . . . . . . . . . 72 2
Resumen del contenido incluido en la página 3
Power eyePiece Mode triPod Mount 3
Resumen del contenido incluido en la página 4
® CONGRATULATIONS ON YOUR PURCHASE OF THE BUSHNELL TOUR V2™ WITH ™ PINSEEKER TECHNOLOGY. The TOUR V2 is a precision Laser Rangefinding optical instrument designed to provide many years of enjoyment. This booklet will help you achieve optimum performance by explaining its adjustments and features as well as how to care for this precise laser rangefinding optical instrument. To ensure optimal performance and longevity, please read these instructions before using your TOUR V2. INTRODUCTION Y
Resumen del contenido incluido en la página 5
english HOW OUR DIGITAL TECHNOLOGY WORKS The TOUR V2 WITH PINSEEKER emits invisible, eye safe, infrared energy pulses. The TOUR V2 WITH PINSEEKER’s Advanced Digital microprocessor and ASIC chip (Application-Specific Integrated Circuit) results in instantaneous and accurate readings every time. Sophisticated digital technology instantaneously calculates distances by measuring the time it takes for each pulse to travel from the rangefinder, to the target, and back. RANGING ACCURACY The ranging
Resumen del contenido incluido en la página 6
GETTING STARTED IINSERTING THE BATTERY Remove the battery cap by lifting the battery door tab and then rotating counter clockwise. Insert a CR-2 3-volt lithium battery into the compartment positive end first, then replace the battery cap. NOTE: It is recommended that the battery be replaced at least once every 12 months. Low Battery Indicator: If the is displayed within the in-view readout, this means “low battery” or battery charge is getting low and the 3-volt lithium battery should be repl
Resumen del contenido incluido en la página 7
ADJUSTING THE EYEPIECE Your TOUR V2 is constructed with an adjustable eyepiece (+/- 2 Diopter Adjustment) that allows one to focus the LCD display relative to the image. Simply rotate the eyepiece until the reticle and object distanced to are in focus to your eye. OPERATIONAL SUMMARY While looking through the 5x eyepiece, depress the power button once to activate the in-view Liquid Crystal Display (LCD). Place the aiming circle (located in the center of the field of view) upon a target at
Resumen del contenido incluido en la página 8
UNIT OF MEASURE OPTIONS The TOUR V2 can be used to measure distances in yards or meters. The unit of measure indicators are located in the lower right portion of the LCD. To select between yards and meters, quickly press and release the POWER button to turn on the unit (on top of the unit), look through the eyepiece, depress the “MODE” button (left side of the eyepiece) and hold it down for approximately 5 seconds. If you are changing from yards to meters, a change in unit of measure will b
Resumen del contenido incluido en la página 9
Once in this mode, press the POWER button to turn the unit on. Next, align the aiming circle reticle onto the flag that you want distance to. Next, press and hold the POWER button and move the laser slowly over the flag or desired object until a circle surrounds the flag indicator. If the laser beam recognized more than one object (i.e. flag and background trees), distance of the flag will be displayed and a circle will surround the PinSeeker indicator informing the user that distance to the
Resumen del contenido incluido en la página 10
™ How to use Slope Mode Once in this mode, you will see a “ ° ” in the field of view informing you that you are in the Slope +/- Mode. Press the POWER button to obtain distance to the flag or other objects. Once the range is displayed, continue to hold the POWER button down for approximately 2 seconds while holding the aiming circle on the flag and keeping the unit as steady as possible so as to allow the inclinometer enough time to measure slope. Then release the POWER button. Once you hav
Resumen del contenido incluido en la página 11
The Truth about Slopes Trying to determine slope angle with the naked eye can be rather deceiving. Most are not well versed to accurately determine slope angle. For example, most golf courses average slope is approximately 4 degrees. A large slope at a golf course is generally no more than 8 degrees. Of course this can vary, and that is why this device will measure slope from -20 to 20 degrees. Some real world examples may help clarify. A moderate roof pitch is 6/12, which means that the roo
Resumen del contenido incluido en la página 12
OPTICAL DESIGN Magnification and Coatings The TOUR V2 features 5x magnification and Multi-Coated optics. A liquid crystal display (LCD) is mounted within the optical system and when activated, displays a reticle for targeting, yards/meters, and Mode indicators. Inherent in the manufacturing process are small black spots that appear in the optical system. These are a natural characteristic of the LCD and cannot be fully eliminated in the manufacturing process. They do not affect the distanci
Resumen del contenido incluido en la página 13
CLEANING Gently blow away any dust or debris on the lenses (or use a soft lens brush). To remove dirt or fingerprints, clean with a soft cotton cloth, rubbing in a circular motion. Use of a coarse cloth or unnecessary rubbing may scratch the lens surface and eventually cause permanent damage. For a more thorough cleaning, photographic lens tissue and photographic-type lens cleaning fluid or isopropyl alcohol may be used. Always apply the fluid to the cleaning cloth – never directly on the le
Resumen del contenido incluido en la página 14
TrOUBLe SHOOTING T aBLe If unit does not turn on - LCD does not illuminate: • Depress POWER button. • Check and if necessar y , replace batter y . If unit does not respond to key presses, replace the battery with a good quality 3 volt lithium battery. If unit powers down (display goes blank when attempting to power the laser): • The batter y is either weak or low quality . Replace the batter y with a good quality 3 -volt lithium battery. If target range cannot be obtained: • Make sure LCD
Resumen del contenido incluido en la página 15
FCC NOTe This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that int
Resumen del contenido incluido en la página 16
MAche/A r rrÊt (AliMent Ation) ocul Aire Mode Monture de tréPied 16
Resumen del contenido incluido en la página 17
FrAnç Ais 17
Resumen del contenido incluido en la página 18
™ FELICITATIONS POUR VOTRE ACHAT DU TELEMETRE TOUR V2 AVEC TECHNOLOGIE ™ ® PINSEEKER DE BUSHNELL. Le TOUR V2 est un appareil a laser de haute precision conçu pour offrir plusieurs annees de plaisir. Ce manuel vous aidera a atteindre la performance optimale en vous expliquant les reglages et caracteristiques ainsi que l’entretien de cet appareil de telemetrie a laser de haute precision. Pour assurer une performance et une duree de vie optimales, veuillez lire les instructions avant d’utilise
Resumen del contenido incluido en la página 19
VOICI COMMENT NOTRE TECHNOGÉNIE NUMÉRIQUE FONCTIONNE Le TOUR V2 avec PINSEEKER émet des impulsions d’énergie infrarouge invisibles et sans risque pour les yeux. Son microprocesseur numérique avancé et la puce CIAS (Circuits intégrés à application spécifique) du TOUR V2 avec PINSEEKER produisent chaque fois des relevés de distances précises et instantanées. La technogénie numérique sophistiquée calcule instantanément les distances en mesurant le temps requis par le parcours aller-retour de ch
Resumen del contenido incluido en la página 20
MISE EN PLACE DE LA PILE Enlevez le cache de la pile en soulevant l’ergot du couvercle puis en le tournant dans le sens inverse des aiguilles d’une montre. Insérez une pile au lithium de CR-2 de 3 volts dans le compartiment d’abord par la borne positive, puis refermez le cache. REMARQUE: Il est recommandé de remplacer la pile au moins une fois par an. Indicateur de batterie faible: Si “ “est affiché lors de l’affichage, ceci indique que la charge de la pile est faible et qu’elle doit être re
