Manual de instrucciones de Bowens RINGFLASH PRO BWL-0485

Resumen del contenido incluido en la página 1

RINGFLASH PRO
USER GUIDE BWL-0485
BOWENS INTERNATIONAL LTD
355 Old Road
Clacton-On-Sea
Essex
CO15 3RH
Tel: +44 (0)1255 422807
Fax: +44 (0)1255 436342
www.bowens.co.uk

Resumen del contenido incluido en la página 2

M INT OR UO ND TU IN C G TIR ON INGFLASH PRO TO LIGHT P INR TO RD OU DC UT CT O IO VN ERVIEW STAND Dear Valued Customer, B D Thank you for choosing the Bowens Ringflash Pro. The Bowens Ringflash Pro has been developed by working closely with professional photographers to create a product suitable for, and which meets the standards of even the most demanding of todays professional studios. For details of all related Bowens products please contact your local distributor, a list of which can be fou

Resumen del contenido incluido en la página 3

MOUNTING RINGFLASH PRO TO LIGHT STAND FLASHTUBE ASSEMBLY REPLACEMENT WARNINGHIGHVOLTAGE STEP 1.) Mount the Camera Bracket to the selected support system as shown in fig. 1. AFTERUSEDONOTTOUCHTHEFLASHTUBEASSEMBLYFORTHIRTYMINUTESDUE TOEXTREMEHEAT STEP 2.) Once the Ringflash Pro is mounted onto the selected support system, simply tighten the mount screw as shown in fig. 2 to hold in STEP 1.) Ensure that the Ringflash Pro is switched off and disconnected from the mains supply and wait for thirty min

Resumen del contenido incluido en la página 4

FITTING / REMOVING QUAD CONNECTORS TO PACK OPERATION • Before use ensure that the pack is switched off. Part Number (230V) BW-7670 • Fit the Ringflash Pro connectors to the pack. To ensure latch retention first insert the tab on the front of the cable plug into the pack socket (as shown in fig. 10) and then press down firmly on the cable entry end (as shown in fig. 11). Part Number (117V) BW-7670US • Switch the pack ‘on’ and ‘test’ flash the Ringflash Pro to ensure operational. • After use alway