Manual de instrucciones de Oregon Scientific Jumbo JMR828A

Resumen del contenido incluido en la página 1

JUMBO RF WALL CLOCK
WITH INDOOR - OUTDOOR THERMOMETER
MODEL NO.: JMR828A
Instruction Manual
INTRODUCTION
A6
Congratulations on purchasing the Jumbo RF Wall Clock with
Indoor-Outdoor Thermometer (JMR828A).
The JMR828A is a multifunctional radio frequency (RF) controlled
clock. It is designed to automatically synchronize its current
time and date when brought within range of the radio signal
generated from the U.S Atomic clock.
A1
Also, this unit displays outdoor and indoor temperature.
A2
Include

Resumen del contenido incluido en la página 2

B REMOTE THERMO SENSOR Note: The effective range may be limited by building materials and the position of either the main unit or the B1 LCD remote thermo-sensor unit. Try various set-up Displays the current temperature monitored by the remote arrangements for best result. unit B2 LED indicator Setting up the thermo-sensor unit: Flashes when the remote unit transmits data to the main 1. Position the remote sensor within the signal transmission display unit range of the main display unit. The ma

Resumen del contenido incluido en la página 3

3. Replace the door so that it clicks into place. Note: If not disposed of properly, batteries can be harmful. Protect the environment by taking exhausted batteries to authorized disposal stations. day-of-the-week display Note: [ ] Low-battery indicator Replace the batteries when the Low-battery indicator lights up. ABOUT RADIO RECEPTION “second” display The JMR828A is a radio frequency (RF) controlled clock. When located within radio signal range from the U.S Atomic Clock , the clock time will

Resumen del contenido incluido en la página 4

To manually set the clock: Note: 1. Press [CLOCK] and hold for two seconds. The hour will start Reasons for not receiving a signal from the remote thermo to flash. sensor may include: 1. The batteries of the remote sensor, the main unit, or both 2. Enter the correct hour using the [ ] button. Hold to rapidly may be low. Low-battery icons should indicate that battery increase the value. power is low and the batteries require changing. 3. Press [CLOCK] to confirm and proceed to set the minute. • W

Resumen del contenido incluido en la página 5

Wall-mount Table Stand SPECIFICATIONS MAIN UNIT Clock Functions Radio Control : Auto synchronizes current time and date by Radio signal from the U.S. Atomic Clock Calendar : Day of week in English / French / Spanish Current month / day format Clock Time : 12-hour format Accuracy : +/- 0.5 second/day (when RF is disabled) General specification REMOTE THERMO SENSOR Power : Two (2) UM-3 or “AA” size This sensor comes with a wall-mount holder and a removable 1.5V battery stand. Use either to hold

Resumen del contenido incluido en la página 6

NOTE ON COMPLIANCE CUSTOMER ASSISTANCE Warning: Changes or modifications to this unit not expressly Should you require assistance regarding this product and its approved by the party responsible for compliance could void the operation, please contact our customer care department at user's authority to operate the equipment. 800-853-8883 or via email at helpme@oscientific.com. Our FCC : customer care department is available 24-7-365. NOTE: This equipment has been tested and found to comply with

Resumen del contenido incluido en la página 7

7 GB

Resumen del contenido incluido en la página 8

MODEL: JMR828A JUMBO RF WALL CLOCK WITH INDOOR-OUTDOOR THERMOMETER Instruction Manual **** Mode D'emploi **** Bedienungsanleitung **** Manuale di Istruzioni **** Instrucciones de Funcionamiento 8 GB