Manual de instrucciones de Harbor Freight Tools 94738

Resumen del contenido incluido en la página 1

CLOCK WITH
BIG DIGITAL LCD DISPLAY
94738
ASSEMBLY & OPERATING INSTRUCTIONS
Due to continuing improvement, actual product may differ slightly from the product described herein.
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web Site at www.harborfreight.com
© ®
Copyright 2006 by Harbor Freight Tools . All rights reserved. No portion of this manual or
any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.
For tec

Resumen del contenido incluido en la página 2

THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the owner’s record below: Model______________ Serial No._____________ Purchase Date_______________ SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the entire manual to become familiar with the unit BEFORE you begin assembly. Technical Specifications Battery: 2 “AA” (not included) LCD (Liquid Crystal Display): Month, Day, Count Down, Temperature Time LCD: 5-13/16” Wall M

Resumen del contenido incluido en la página 3

Unpacking When unpacking your Digital Clock, check to make sure that the product is intact and undamaged. If any parts are missing or broken, please call HARBOR FREIGHT TOOLS at: 1-800-444-3353. Operation Your Digitial Clock requires no assembly. It is important that you read the entire manual to become familiar with the product BEFORE you use the Digital Clock. Installing and Replacing the Battery 1. Press down on the release tab on the back of the Clock to open the Battery Compartment-see Fig

Resumen del contenido incluido en la página 4

Setting the Clock 1. The mode changes each setting in the following order; hour, minute, month, day, week, alarm hour and alarm minute. Temperature settings and snooze each have their own button-see Figure 1. 2. Press the Mode button and the Up or Down Button to run through each of the above settings until you arrive at the setting you desire to change or set. 3. Once you have arrived at the mode you desire to change or set (hour, minute, month, day, alarm hour, alarm minute) press UP or Down b

Resumen del contenido incluido en la página 5

Maintenance 1. Protect the Digital Clock from rough use. It is susceptible to damage from being dropped, struck, or other abuse. 2. Keep the Digital Clock clean and dry. Occasional cleaning with a clean rag will extend its life and good appearance. 3. Keep out of the reach of children. No replacement parts are available for this product. PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE M