Resumen del contenido incluido en la página 1
OWNERS MANUAL
When Technology Meets Ecology
CAUTION:
Before operating this appliance
it is recommended that you
read this manual and follow all
Safety Rules and Operating
Instructions.
COMBINATION WASHER & CONDENSER DRYER
MODEL WDC1024M & WDC1025M
corporate offices
nd
Westland Sales / PO Box 427 / 15650 SE 102 Ave / Clackamas, OR 97015 - USA
warehouses Clackamas, OR & Elkhart, IN / phone 503.655.2563 / fax 503.656.8829
web www.westlandsales.com / www.splendide.com / e-mail spl
Resumen del contenido incluido en la página 2
TABLE OF CONTENTS Record Serial & Model Number....……... 1 Line Drawing and Images..............……… 8 Installation...........................................…. 2 How To Wash.....................................…... 9 Removing Shipping Brackets…... 2 Operating Steps.......................…... 9 Leveling..................................….. 2 Your First Load......................…… 9 Grounding...........................................….. 3 Pre-Wash..................................….. 9 Plum
Resumen del contenido incluido en la página 3
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICES PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "Dangerous Voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The ex
Resumen del contenido incluido en la página 4
INSTALLING YOUR WASHER-DRYER IMPORTANT In the accessories bag you will also find a spanner that is to be used for removing brackets and leveling washer-dryer feet. REMOVING SHIPPING BRACKETS MODELS: WDB1043M-LWD1054M-WDC1025 WDC1025M 1. Remove back panel screws and lift panel clear (Fig. 1). 2. Remove fixing screws from the four brackets and cross bearing (Fig. 2) then remove brackets. 3. Fix back panel with 3 screws previously removed (Fig. 3). 4. Close the 4 holes on t
Resumen del contenido incluido en la página 5
FOR YOUR OWN PROTECTION, AND TO PREVENT ACCIDENTS, INJURY AND FIRE, PLEASE READ THE FOLLOWING CAREFULLY: • Destroy the carton and plastic bags after the washer- • Repair or replacement of a part should be made only dryer has been unpacked. by a qualified service technician to prevent personal injury or damage to the machine. Ask your dealer for a • Children should never be left alone or unattended in list of authorized repair service companies. the area where appliances are located.
Resumen del contenido incluido en la página 6
IMPORTANT Make sure the drain hose is not kinked and the water flow is not restricted. Standpipe Drain System: When a stanpipe installation is used it must be at least 1¼" (3.2 cm) in diameter with a minimum carry away capacity of 7 gallons (26 liters) per minute. Wall or Floor Standpipe Drain: Top of standpipe must be at least 25" (62 cm) high and no higher than 34" (86 cm) from bottom of washer (A & B). Sink Drainpipe System: • You may connect directly to a "Wye" B
Resumen del contenido incluido en la página 7
Recessed, Closet And Alcove Installation Instructions The Machine may be installed in a recessed area, closet or alcove. The installation spacing is in inches and is the minimum acceptable. Additional spacing should be considered for easy installation, servicing and com- pliance with local codes and ordinances. Other installations must use the mini- mum dimensions indicated. Minimum Installation Spacing * Additional clearances for wall, door and floor moldings may be required. Pa
Resumen del contenido incluido en la página 8
SAVE THESE INSTRUCTIONS OPERATING INSTRUCTIONS LAUNDRY PREPARATION Sorting Clothes should be sorted to separate items which could damage other garments. Sort items into loads according to similar colors, fabrics, garment construction and degrees of soil. • • Color - Separate clothes into three groups: whites and Garment constructions - Garments that fray easily or pastels medium and bright colors and dark colors. that have unusual trim require gentle care. These gar- Items which
Resumen del contenido incluido en la página 9
Drain Screen WASHER FEATURES The removable drain screen which protects the pump ON-OFF Button from lint and foreign matter needs to be cleaned periodi- After the clothes have been loaded and the desired water cally. How often will depend on your wash load, e.g. temperature and cycle selected, pressing the ON-OFF cotton towels cause more lint to collect than nylon loads. button causes the cycle to begin. Open the service door by pressing on the left hand side. Medium/High Spin Butt
Resumen del contenido incluido en la página 10
Page 8
Resumen del contenido incluido en la página 11
HOW TO WASH Operating Steps • After washing and drying are complete the hot and cold Before using the washer for the first time, wipe the inside water faucets should be turned off and push the ON/ and outside with a damp cloth to remove any travel dust OFF switch. Wipe the inside off the washer door and that has accumulated and we recommend operating a rinse rubber boot with a soft cloth or sponge to remove any cycle to rinse out your machine. remaining moisture. Be sure the hot and co
Resumen del contenido incluido en la página 12
HOW TO USE YOUR NEW WASHER-DRYER • Open the door, load the articles to be dried into the • Load the drum with clothes as previously described. cylinder and close the door. Close the door. • Press the On/Off button in and the machine will then • Select a program. See chart below/11. start the drying cycle. • Select drying time (and half heat if required). • Door may be opened during drying cycle. • Select desired spin speed (high spin only occurs in TO RINSE, SPIN AND TUMBLE-DRY
Resumen del contenido incluido en la página 13
MODELS WDS1043M-SWD1054M-WDC1024-WDC1024M **Compartments may be used with the selections PRE-WASH/COLD WASH indicated. Add detergent in compartment "A" and Switch the *With the cycle C/C please proceed as follows. machine on. COLD WASH When the machine starts the pre-wash, open the Add detergent in compartment "A" detergent dispenser drawer and add further detergent to compartment “A” for the REGULAR wash cycle. LAUNDRY AIDS Detergent Amount Recommendations • Use only a low suds
Resumen del contenido incluido en la página 14
STAIN REMOVAL CHART Blood Egg or Meat Juice Rinse or soak fresh stain in cold water. Work detergent Rinse in cold water. If stain remains, sprinkle with meat into any remaining stain. Rinse. If stain persists, put a tenderizer - let stand 15 to 20 minutes. If stain still few drops of ammonia on stain and repeat detergent remains, sponge with cleaning fluid or diluted bleach. treatment. Rinse. If necessary bleach. Launder in hot water. The use of hot water first may set Candle Wax st
Resumen del contenido incluido en la página 15
Nail Polish Scorch Treat while fresh, scraping or wiping off as much as Rinse or soak in cold water. Work detergent into stain. possible, before it dries. Place stain face down on white Rinse. Bleach, if necessary. Stain may be impossible to paper towels. Sponge back of stain acetone (nail polish remove. remover) or sponge with denatured alcohol and a few Shoe Polish drops of household ammonia. Sponge stain frequently. Scrape off as much as possible. Pre-treat with a detergent Launder wi
Resumen del contenido incluido en la página 16
WINTERIZING • Turn off the hot and cold water source to machine. • Turn unit to off. • Set machine to fill in regular cycle on warm wash. • Place a towel under the drain filter area and remove drain filter. This will drain any water left in the bottom • Turn machine on for a few minutes so machine can of unit. take on any water. • Install drain filter correctly to assure it does not leak • Lift inlet hoses to assure no water is left in inlet hoses. water. • Turn unit off. •
Resumen del contenido incluido en la página 17
"Chugging" Noise" Vibrating Noise • A certain amount of "chugging" noise is normal in a • Washer is not level and lock nuts may not be securely heavy-duty machine. tightened on front adjusting feet. Rattling And Clanking Noise • A rubber cap may be missing from one of the leveling • Foreign objects such as coins or safety pins may be in legs. the tub. • Washer may not be installed on a solid, firm floor. • Foreign objects may be in the pump. • The four shipping brackets are stil
