Resumen del contenido incluido en la página 1
Micro-computer Electronic Time Clock
User Manual
Resumen del contenido incluido en la página 2
For more information on Acroprint products Acroprint offers a complete line of standard Time Recorders, state-of-the-art Electronic Time Recorders, Document Time Stamps, Watchmen’s Systems, HRx Human Resource Software, and Time & Attendance Systems. Time for Business…. 5640 Departure Drive Raleigh, NC 27616-1841 919.872.5800 In USA 800.334.7190 Fax: 919.850.0720 email: sales@acroprint.com Visit our Web Site: www.acroprint.com Register online at www.acroprint.com
Resumen del contenido incluido en la página 3
Table of Contents I. Introduction.................................................................................1 Overview..........................................................................................................1 Specifications...................................................................................................1 Accessories ......................................................................................................1 Features..................
Resumen del contenido incluido en la página 4
IX. Troubleshooting.........................................................................20 Location of fuses............................................................................................21 Error codes.....................................................................................................21
Resumen del contenido incluido en la página 5
I. Introduction Overview The ATR120 is an electronic across-the-card time clock, which can be used for a weekly or a biweekly pay period. The unique ATR121 Time Card offers a weekly time card on the front and a biweekly time card on the back. The day progresses across the card from left to right in six columns. This is accomplished by pressing one of the card-positioning buttons (IN-OUT) on top of the clock. The pay period (day of week) moves down the card, top to bottom. You may select t
Resumen del contenido incluido en la página 6
Features Compact design for desktop or wall mounting Weekly or bi-weekly pay periods Digital display shows time and date and is synchronized with dot matrix printer 9-pin dot matrix printer that allows for 12 or 24-hour & 60/100 print format Easily distinguish printing time between AM and PM. PM minutes or hundredths are over scored 8:00 (8:00 PM) 2-color (red/black) cassette ribbon can be programmed so punches outside of schedule will print in red Built-in signal t
Resumen del contenido incluido en la página 7
III. Location of Components 1. Anti-dust cover 2. Time card receiver 3. In/Out advance buttons (6) 4. Analog clock (Clock dial) 5. Display 6. Program mode switch 7. Reset (return to original factory settings) 8. Wall-mounting keyholes 9. Fuse access door IV. Getting started Installing clock dial battery The front cover must be opened before the clock dial battery can be installed. Opening the front cover also allows you to set the clock's analog time. You will need to do this occ
Resumen del contenido incluido en la página 8
To open the front cover, turn the clock on its back and remove the two outer screws on bottom of clock. Stand the clock upright with the back facing you. With both thumbs press down on IN1 and OUT3 buttons while using your fingers to push cover away. The clock dial panel is shipped locked into place. You have the option of removing the tab that locks the clock panel into place for easy access when setting the clock. If you remove the locking tab, we suggest you keep the tab. To remov
Resumen del contenido incluido en la página 9
clock to function as program switches. With the dust cover open you will find that these program switches are numbered 1 – 6 to simplify programming the ATR120 The first switch on the top left of the clock (IN1) functions as the feature selection switch and will advance you through the program mode. This switch also allows you to skip over a feature and advance to the next feature without programming. Once a feature is selected, switches “OUT2” through “IN3” will be used for programming. W
Resumen del contenido incluido en la página 10
Press button four once. The display reads 2-1. The 2 indicates this is a weekly pay period. OUT3 flashes in the lower right hand corner of the display. This will flash until the changes are saved. Press button five to choose the current day of the week for your weekly pay period. 2-1 = Monday 2-2 = Tuesday 2-3 = Wednesday 2-4 = Thursday 2-5 = Friday 2-6 = Saturday 2-7 = Sunday Press button six to save your settings. OUT3 is no longer displayed. For biweekly pay periods
Resumen del contenido incluido en la página 11
Press button six to save your settings. OUT3 is no longer displayed. Setting the time Make sure the ATR120 is in programming mode. Press button one once to start setting the current time. This mode starts the clock-timing device. The display indicates the time at which the clock is currently set. Depending on how long you have been in the program mode, the display may advance from the default setting of 00 5:00. Press button four to set the hours (24-hour format; 0-23 with
Resumen del contenido incluido en la página 12
Setting Daylight Saving Time Press button one once. If you are entering the programming mode for the first time, you will need to press button one three times to set Daylight Saving Time. The display reads S1 0-0 with S1 indicating the start of Daylight Saving Time. Press button four to set the month (1-12, with 1= January, 2 = February, etc.) The display reads S1 0-0 with OUT3 flashing in the lower-right hand corner of the display. Press button four until the month Daylight Saving
Resumen del contenido incluido en la página 13
example, on the first date of Daylight Saving Time, the clock will advance from midnight to 01:00. At midnight on the last day, the clock will change from 00:00 to 23:00. Setting the day change time Press button one once. If you are entering the programming mode for the first time, you will need to press button one four times to set the Day Change Time. The display should read 5:00, indicating the day change time. Five o'clock AM is the default time for the day change to take place. T
Resumen del contenido incluido en la página 14
Setting the two-color printing and internal signal tone Time cards can be audited much easier by highlighting in red, punches outside the normal work schedule. Using the internal audible signal will remind your employees of start and stop times in their work schedule. You can even have a warning signal two minutes before start time to alert your employees. This program allows for a total combination of 32 scheduled events. Events can be selected to allow a ribbon color change or a signal t
Resumen del contenido incluido en la página 15
Event Print in Print in Signal Print Red & Print Black Max 32 Red Black Only Signal & Signal IN1 OUT1 IN2 IN1 IN2 OUT1 IN2 1 08:00 2 08:01 3 12:00 4 13:00 5 13:01 6 17:00 7 17:30 8 07:30 Event Time Description of Event 1 8:00 SIGNAL Only to denote start of work schedule 2 8:01 Color changes to RED to denote late or early lunch punches 3 12:00 SIGNAL noting start of lunch period and color change to BLACK SIGNAL 4 13:00 SIGNAL Only to
Resumen del contenido incluido en la página 16
necessary to set the day(s) the event should occur on. The event will occur on the day(s) shown across the top of the display. It is recommended that a program chart be used to create a schedule to assist in programming this feature. The typical company uses eight events, similar to the previous example on page 11. Program Print in Print in Signal Print Red & Print Black Red Black Signal & Signal IN1 OUT1 IN2 IN1 IN2 OUT1 IN2 1 2 3 4 5 6 7 8
Resumen del contenido incluido en la página 17
Setting signal duration The ATR120 can be set to produce a signal lasting from zero (0) 0 to sixty (60) seconds, with the default being five (5) seconds. Press button one once. If you are entering the programming mode to set or adjust of the signal duration, press button one seven times. The display should now read 5, indicating the signal will sound for five seconds. Press button five to change the signal duration. The display indicates 5 with OUT3 flashing in the lower right-hand
Resumen del contenido incluido en la página 18
Use this chart to plan your Auto Column Shift times. EVENT IN1 OUT1 IN2 OUT2 IN3 OUT3 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 To program the auto column shift: Press the first button one time to advance to programming the auto column shift feature. If you are entering the programming mode to adjust the auto column shift position you will need to pr
Resumen del contenido incluido en la página 19
IN2 In Punch (Lunch) OUT2 Out Punch end of shift IN3 In Punch Overtime Period OUT3 Out Punch Overtime Period Select the column position by pressing button three. The column position icon at the bottom of the display will stop flashing. ALL days of the week will appear at the top of the display. To select this move everyday of the week (recommended), press button six to select and to advance to the next column selection. To select certain day(s) of the week, after pressing b
Resumen del contenido incluido en la página 20
Setting the password The ATR120 allows for the use of a four-digit number as a password to protect programmed settings. When the password is set, you will be asked to enter it each time you enter the programming mode. It is recommended that if a password is used that you write it down and store it in a safe place. If an incorrect password is entered you will be prevented from entering the programming mode. Note: If correct password cannot be entered, the clock can be reset to original sett
