Manual de instrucciones de Makita HM0821

Resumen del contenido incluido en la página 1

ECHNICAL INFORMATION
58512,58814
T
Subject
Modifications on Tool Holder
For Models HM0810, HM810B, HM0810T, HM0811, HM0821
Country All countries
Description As illustrated below;
1) Flat Washer 43 (Part No.267203-1) has been added as illustrated below in order to
fasten Tool Holer on Barrel Complete straightly with further accuracy.
2) The adhesive, Three Bond 1342 has been added on three spots of the thread of Tool Holder
as illustrated below to prevent Tool Holder from loosening.
3) I

Resumen del contenido incluido en la página 2

Service Manual for Tool Holders of Models HM0810/ HM0810B/ HM0810T When re-securing Tool Holder in repairing, always take the steps of procedure as described below. 1) How to Remove Tool Holder (Motor side (a) Hold the machine tightly with a vise as in Fig.(1). of machine) (b) Insert a hex.wrench (size: 17mm between Copper Plates the opposite sides) into the hex. socket of pipe of (Part No.1R041) Tool Holder, and loosen it with a pipe of 1m long one meter long.