Resumen del contenido incluido en la página 1
Portable Ice Maker
KIM202W
Owner’s Manual
For more information on other great KoldFront products on the web, go to http://www.edgestar.com
Resumen del contenido incluido en la página 2
Important Safety Information Improper handling can cause serious damage to the KoldFront ice maker and/or injury to the user. This ice maker is designed for domestic indoor use only. Do not use the unit for industrial or commercial use. Any other use may invalidate the warranty. Please review the ratings label located on the rear panel of the unit for electrical and other technical data related to this unit. The unit must be used in a properly grounded wall outlet. Please read and follow
Resumen del contenido incluido en la página 3
Table of Contents IMPORTANT SAFETY INFORMATION ................................................................. I INTRODUCTION ................................................................................................... 1 PARTS IDENTIFICATION ..................................................................................... 2 OUTER VIEW ....................................................................................................... 2 INSIDE VIEW .........................
Resumen del contenido incluido en la página 4
Introduction Thank you for purchasing this KoldFront ice maker. We are glad you chose us. We believe that your purchase of this product opens a relationship between you and KoldFront. We will provide the customer support needed to nurture that relationship. This manual contains important information regarding the proper installation, use and maintenance of your ice maker. Following this manual will ensure that your product will work at its peak performance and efficiency. Please
Resumen del contenido incluido en la página 5
Parts Identification Inside View Cover with Control Panel and Window Evaporator Ice Case (Bowl) Ice Full Sensor Ice Shovel Ice Basket Ice Scoop Outer View Control Panel Air Outlet KoldFront Portable Ice Maker 2
Resumen del contenido incluido en la página 6
Before you Begin: Preparing the Ice Maker for Use Before you plug the ice maker in to a power supply, be sure to let it stand upright for at least 24 hours to allow the compressor’s oils to settle. Unpacking the Ice Maker Carefully remove the packaging materials. Remove any shipping tape and glue from your ice maker before using. Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your ic
Resumen del contenido incluido en la página 7
Operation Using Your Ice Maker Before using your ice maker it is strongly recommended to clean it thoroughly. Read and follow the Cleaning and Maintenance section of the manual before proceeding. Follow the steps below to start using your ice maker. 1. Open the top cover and remove any packaging tape that may be holding down the ice case, ice shovel, ice basket, and ice scoop. Remove the ice scoop. 2. Remove the ice basket and clean it. 3. Clean the water reservoir. 4. Pour wate
Resumen del contenido incluido en la página 8
Using the Control Panel Ice Full Indicator Power Indicator Add Water Indicator Ice Size Indicators Ice Size Button Power Button Button Function ON/OFF Powers the unit on or off. Changes the ice size between Small and SELECT Large. The indicator light will turn on next to the size you set. Indicator Function The add water light will turn on if the unit does ADD WATER not have water in the reservoir. The ice full light will turn on if the ice basket is ICE FULL full. The p
Resumen del contenido incluido en la página 9
How the Portable Ice Maker Produces Ice After the unit is powered on, the ice maker begins with rotating the ice case into a horizontal water fill position under the evaporator. The water pump is engaged and fills the ice case with water. Water overflows for a few seconds before the compressor turns on. The compressor then pumps refrigerant and the fan will turn on automatically after the condenser heats up. The unit will be producing bullet shaped ice around the stainless steel evapora
Resumen del contenido incluido en la página 10
CLEANING AND MAINTENANCE Periodic cleaning and proper maintenance will ensure efficiency, top performance, and long life. Never use a solvent-based cleaning agent. These cleaners may transmit taste to the ice cubes, or damage and discolor the interior. The icemaker must be thoroughly Unplug the unit before cleaning the exterior and interior. cleaned if it has been left unused for a long time. Follow carefully Before using your ice maker, you are strongly recommended to clean it
Resumen del contenido incluido en la página 11
TROUBLESHOOTING Before Calling for Service If the unit appears to be malfunctioning, the issue could be solved by following the suggestions in the “Solution” column. Issue Possible Cause Solution The ice maker is unplugged. Plug the ice maker in. Press the power button. The Power Indicator The ice maker power switch is OFF. light should be on. Try a different power outlet. If the unit works on Power outlet does not work. a different circuit, you may need to contact a No Power
Resumen del contenido incluido en la página 12
Specifications Description of product Portable Ice Maker Model KIM202W Voltage/Frequency AC 115V~60Hz Ice-Making / Ice-Harvest rated 1.5A / 2.0A current Color White Ice Storage capacity 1.5 lbs Ice-making capability 26 lbs / day * Refrigerant R134a, 64g Dimensions 9.5 " W x 14.1 " D x 12.9" H (Width x Depth x Height) Weight 20.3 lbs Note: Technical data and performance information provided for reference only. Specifications are subject to change. Check the rating label on the ice m
Resumen del contenido incluido en la página 13
Limited Warranty One (1) Year Parts & Ninety (90) Days Labor This product is warranted by EdgeStar to be free from defective workmanship and materials, subject to any conditions set forth as follows: WHAT IS COVERED: LABOR: For a period of NINETY (90) DAYS from the date of original purchase, labor will be performed free of charge at an authorized EdgeStar repair facility. At its option, EdgeStar will repair the product with new or remanufactured parts, or exchange the defective produc
Resumen del contenido incluido en la página 14
By EdgeStar Products Box 81336 Austin, TX 78708-1336 Toll Free: 1-866-319-5473 Web: http://www.edgestar.com E-mail: service@edgestar.com Register your product, download owner’s manuals, access additional troubleshooting resources, and obtain more information on other great EdgeStar & KoldFront products on the web at: http://www.edgestar.com Product contents and specifications may change without notice. Copyright © 200
