Manual de instrucciones de Cornelius 629096828

Resumen del contenido incluido en la página 1

ColdFusion Icemaker Adapter Kit Installation Instructions
INSTALLATION INSTRUCTIONS
FOR ADAPTER KIT P/N 629096828
This adapter kit is recommended for use with Cold Fusion Dispensers and Icemakers that measure 30" wide X
24.5" deep. The icemaker drop zone and bin stat must fit within the footprint shown in figure 1.
30.30”
1.67”
(BACK SIDE OF DISPENSER)
27.40”
ICE MAKER DROP ZONE
21.50”
AND BIN STAT MUST FIT
WITHIN THE
27.40 X 21.50” OPENING
Figure 1
!
WARNING:
Disconnect power to the unit befor

Resumen del contenido incluido en la página 2

ColdFusion Icemaker Adapter Kit Installation Instructions 1. First step is to position and secure the kit to the dispensing unit. Whenever possible, this should be done prior to lifting the dispenser onto the counter to allow sufficient access and also provide easier and faster installation. ICE MAKER SUPPORT RAIL Figure 2 2. Place ice maker support rail into the front set of pockets in the ice bin as shown in Figure 2. 3. Position the adapter kit onto the drink dispenser so that it is pulle

Resumen del contenido incluido en la página 3

ColdFusion Icemaker Adapter Kit Installation Instructions 5. When ready, lift the machine onto the counter. 6. Position the icemaker on top of the kit. Do not slide the icemaker into position. This may tear the gasket material on top. Instead, lift and position the icemaker into place. The back side of the icemaker should line up with the back of the kit. Side walls should also be centered from left to right. Connect the icemaker according to the manufacturer’s requirements. 7. Apply a contin

Resumen del contenido incluido en la página 4

ColdFusion Icemaker Adapter Kit Installation Instructions Adapter Kit Operating Instructions 1. The plastic lid of the kit slides in and out and also hinges upward. This provides access to the hopper in the event manual ice filling is required. Simply pull out the lid and hinge upward. The lid will remain in the up position on its own. 2. If manual filling is required, the lid must be pulled out and lifted up out of the way. Do not leave the lid down and rest a bucket of ice on it while manua