Manual de instrucciones de Vulcan-Hart 1ER85C

Manual de instrucciones del aparato Vulcan-Hart 1ER85C

Aparato: Vulcan-Hart 1ER85C
Categoría: Freidora
Fabricante: Vulcan-Hart
Tamaño: 0.39 MB
Fecha de añadido: 9/9/2013
Número de páginas: 20
Imprimir el manual

Descargar

¿Cómo se utiliza?

Nuestro propósito es proporcionarte el acceso más rápido posible a los contenidos incluidos en los manuales de instrucciones del aparato Vulcan-Hart 1ER85C. Utilizando la vista previa online, puedes ver rápidamente el índice de contenidos y pasar a la página donde encontrarás la solución a tu problema con Vulcan-Hart 1ER85C.

Para tu comodidad

Si ver los manuales de instrucción de Vulcan-Hart 1ER85C directamente en esta página no es cómodo para ti, puedes utilizar dos soluciones posibles:

  • Vista en pantalla completa – Para ver cómodamente los manuales de instrucciones (sin descargarlos en tu ordenador) puedes utilizar el modo de vista en pantalla completa. Para activar la vista del manual Vulcan-Hart 1ER85C en pantalla completa, utiliza el botón Pantalla completa
  • Descargar al ordenador – también puedes descargar el manual de instrucciones de Vulcan-Hart 1ER85C a tu ordenador y guardarlo en tu colección. Sin embargo, si no quieres ocupar espacio en tu dispositivo, siempre podrás descargarlo de ManualsBase.
Vulcan-Hart 1ER85C Manual de instrucciones - Online PDF
Advertisement
« Page 1 of 20 »
Advertisement
Versión impresa

Muchas personas prefieren no leer el documento en la pantalla, sino en versión impresa. La opción de impresión también está prevista y puedes utilizarla haciendo clic en el enlace más arriba - Imprimir el manual. No tienes que imprimir el manual completo de Vulcan-Hart 1ER85C, solo las páginas que elijas. Ahorra papel.

Resúmenes

A continuación encontrarás resúmenes de los contenidos incluidos en las páginas posteriores del manual de instrucciones para Vulcan-Hart 1ER85C. Puedes utilizarlos si quieres ver rápidamente el contenido que se encuentra en la siguientes páginas del manual.

Resúmenes de contenidos
Resumen del contenido incluido en la página 1

INSTALLATION &
OPERATION MANUAL
1ERD/1ERC SERIES ELECTRIC FRYERS
1ER50D ML-136496
1ER85D ML-136497
1ER50C ML-136498
1ER85C ML-136499
For additional information on Vulcan-Hart or to locate an authorized parts
and service provider in your area, visit our website at www.vulcanhart.com
VULCAN-HART
3600 NORTH POINT BLVD.
DIVISION OF ITW FOOD EQUIPMENT GROUP, LLC BALTIMORE, MD 21222
WWW.VULCANHART.COM
FORM 32903 (11-05)

Resumen del contenido incluido en la página 2

Installation, Operation and Care of MODEL 1ER SERIES ELECTRIC FRYERS PLEASE KEEP THIS MANUAL FOR FUTURE USE GENERAL Vulcan 1ER Series Electric Fryers are produced with quality workmanship and material. Proper installation, usage and maintenance of your fryer will result in many years of satisfactory performance. It is suggested that you thoroughly read this entire manual and carefully follow all of the instructions provided. Vulcan 1ER Series Electric Fryers are available in various sizes, with

Resumen del contenido incluido en la página 3

In addition, check for possible shipping damage. If the fryer is damaged, save the packaging material and contact the carrier within 15 days of delivery. Do not use the door or its handle to lift the fryer. LOCATION The equipment area must be kept free and clear of combustible substances. Minimum clearance from combustible construction is 6" (152 mm) from the sides and 6" (152 mm) from the back of the fryer. Minimum clearance from noncombustible construction is 0" from the sides and 0" from the

Resumen del contenido incluido en la página 4

Casters (Accessory) If it is necessary to disconnect the restraint, unplug electrical supply before disconnection. Reconnect the restraint before plugging the electrical supply in and returning the fryer to its installation position. Instructions for installing casters to the fryer are included with the casters. LEVELING Place a carpenter's level on top of the fryer and level the fryer front-to-back and side-to-side by turning the adjustable legs or casters. Fig. 1 ELECTRICAL CONNECTIONS WARNIN

Resumen del contenido incluido en la página 5

OPERATION WARNING: HOT OIL AND PARTS CAN CAUSE BURNS. USE CARE WHEN OPERATING, CLEANING AND SERVICING THE FRYER. WARNING: SPILLING HOT FRYING COMPOUND CAN CAUSE SEVERE BURNS. DO NOT MOVE FRYER WITHOUT DRAINING ALL FRYING COMPOUND FROM THE TANK. BEFORE FIRST USE • Clean the protective metal oils from all surface parts and the tank interior using a noncorrosive, grease-dissolving commercial cleaner. Follow the cleaner manufacturer's directions. • Rinse thoroughly and drain (open the front door

Resumen del contenido incluido en la página 6

1ERD SERIES CONTROLS — Control Guide — Power switch; for turning the fryer on or off. (Power switch is located behind the door panel.) — For cleaning purposes when the fryer is filled with water. Temperature is maintained at approximately 192°F (89°C).** — For entering and exiting the program mode. For scrolling through program parameters. — Starts and stops the timer; Silences the alarm after the timer times out; For entering temperature and time values in the program mode. — Starts and stops

Resumen del contenido incluido en la página 7

PROGRAMMING Temperature, time and other parameters must be set before operating. Once these parameters are set, the fryer can be operated at the touch of a button. Press to enter the program mode and scroll through the parameters. If the Parameter Lock feature is disabled, program mode is immediate. If the Parameter Lock feature is on, LoC is displayed in the window and program entry cannot be accessed. To access the program mode while LoC is on, press within 6 seconds of pressing .

Resumen del contenido incluido en la página 8

Melt Options (1ERD Series) The controller has three options for bring shortening up to temperature: CY L (Liquid shortening) - For slowly bringing liquid shortening up to temperature. CY S (Solid shortening) - For slowly melting solid shortening. CY O (No melt) - For immediately bringing liquid shortening up to fry temperature. When using solid shortening in the fryer, the CY S (solid shortening) option must be used. Solid shortening must be gently warmed to a liquid state before heating to fry

Resumen del contenido incluido en la página 9

1ERC SERIES CONTROLS — Control Guide — Power switch; for turning the fryer on or off. (Power switch is located behind the door panel.) — For setting fry temperature. For viewing shortening temperature and set temperature. — For entering and exiting the program mode. — For selecting program parameters. For setting timers 1 through 0. For entering Through temperature and time values. — For toggling through the selections under program parameters. — For setting time on timers 1 through 5 in the pro

Resumen del contenido incluido en la página 10

PROGRAMMING Temperature, time and other parameters must be set before operating. Follow the Program Guide to configure the fryer to your particular operation. Programming Guide to enter into the program mode, then follow the steps under each parameter to enter the Press desired information. To exit the parameter and save changes, press . To exit the program completely, press again. PARAMETER STEPS LEFT DISPLAY RIGHT DISPLAY Press SELECT OPTIONS Press DEGREES F or C F or C Fahrenheit or C

Resumen del contenido incluido en la página 11

Programming Guide (Cont.) PARAMETER STEPS LEFT DISPLAY RIGHT DISPLAY Press SELECT OPTIONS Press ENGLISH (Factory Default) LANGUAGE Language Press to select a language. ENGLISH/ESPANOL FRANCAIS/DEUTSCH HOLLAND Press when complete. PROGRAM Press SELECT OPTIONS Press NO MELT/LIQUID/SOLID Melt Options Press to select melt options. NO MELT/LIQUID/SOLID (See Melt Options) Press when complete. PROGRAM Press SELECT OPTIONS Press RECOVERY* Recovery Time Press

Resumen del contenido incluido en la página 12

Melt Options (1ERC Series) The controller has three options for bring shortening up to temperature. Upon startup, the fryer will display the selected melt option in the window when heating: HEATING NO MELT - For immediately bringing shortening up to fry temperature. MELT L LIQUID - For slowly bringing liquid shortening up to temperature. MELT S SOLID - For slowly melting solid shortening. When using solid shortening in the fryer, the SOLID melt option must be used. Solid shortening must be ge

Resumen del contenido incluido en la página 13

Dispose The controller can also be programmed to alert the operator to dispose of the shortening by counting the number of times the shortening is filtered. When the filter count is the same as the programmed filter count, DISPOSE is displayed in the window. • PROG 00 - Enter the number of filter counts you want the controller to count before giving a dispose alert. To disable the dispose reminder, enter 99. • ACT 00 - Leave at 00 unless editing. This is the number of times the shortening has be

Resumen del contenido incluido en la página 14

4. Enter the desired time using keys through . The time is displayed in the window. After entering the time, press ; SELECT PRODUCT is displayed in the window and the LED's on timers through are lit. 5. Repeat steps 3 and 4 to program the remaining timers, or press to exit the program completely. Timers through : 1. Press and enter the program mode. PROGRAM is displayed in the window. 2. Press . The LED's on timers through are lit and SELECT PRODUCT is displayed in

Resumen del contenido incluido en la página 15

3. Select a timer; the programmed time is displayed in the window. A. Duty Time : 1) Press either arrow on ; DT# 00:00 is displayed in the window. 2) Enter the desired time using keys through . The time is displayed in the window. 3) Continue to the next step or press to choose another timer. B. Hold Time: 1) Press either arrow on ; HD# 00:00 is displayed in the window. 2) Enter the desired time using keys through . 3) Continue to the next step or press to choose another timer.

Resumen del contenido incluido en la página 16

Time Programming Quick Chart Press to enter the program mode Press for Press for timers to timers to Select a Timer Enter Time Exit Program Press to Using continue to Press Set DUTY Time Press Set HOLD Time Press Select COMP or STRAIGHT — 16 —

Resumen del contenido incluido en la página 17

FRYING GUIDELINES (ALL MODELS) FRYING • Heat shortening to set temperature. • Pieces of product to be fried should be about the same size to ensure the same doneness. • Drain or wipe dry raw or wet foods to minimize splatter when lowering into the hot oil. • Do not overfill baskets. Recommended maximum capacities Lb / kg of Total Lb / kg Total Lb / kg Product of Product of Product Models (1 Basket) (2 Baskets) (3 Baskets) 1 1ER50D, 1ER50C 2 /2 / 1 5 / 2.3 N/A 1 1 1ER85D, 1ER85C 3 /2 / 1.6 7 /

Resumen del contenido incluido en la página 18

DRAIN INTERLOCK Prevents the heating elements from operating when the drain valve is open. SHORTENING LIFE Shortening life may be extended by following these guidelines: • Do not salt foods over the fryer. • Use good quality shortening. • Filter shortening daily at a minimum. • Replace shortening if it becomes poorly flavored. • Keep equipment and surroundings clean. • Set thermostats correctly. • Remove excess moisture and particles from food products before placing in fryer. CLEANING WARNING:

Resumen del contenido incluido en la página 19

6. Close the drain valve and refill the tank with water. Add 1 cup (0.2 L) of vinegar to neutralize alkaline left by the cleaner. Solution level must be between the MIN and MAX level on the fryer tank. Bring the solution to a simmer and allow it to stand for a few minutes. 7. Drain the tank and rinse thoroughly with clear, hot water. All traces of cleaner must be removed. Dry the tank thoroughly. 8. Close the drain valve and add shortening. Follow the FILLING FRY TANK WITH SHORTENING procedure i

Resumen del contenido incluido en la página 20

MAINTENANCE WARNING: HOT OIL AND PARTS CAN CAUSE BURNS. USE CARE WHEN OPERATING, CLEANING AND SERVICING THE FRYER. WARNING: SPILLING HOT FRYING COMPOUND CAN CAUSE SEVERE BURNS. DO NOT MOVE FRYER WITHOUT DRAINING ALL FRYING COMPOUND FROM THE TANK. SERVICE AND PARTS INFORMATION To obtain service and parts information concerning this fryer, contact the Vulcan-Hart Service Agency in your area (refer to our website, www.vulcanhart.com for a complete listing of Authorized Service and parts depots).


Manuales de instrucciones similares
# Manual de instrucciones Categoría Descargar
1 Vulcan-Hart 1GR45C ML-136414 Manual de instrucciones Freidora 3
2 Vulcan-Hart 1GR45CF ML-136791 Manual de instrucciones Freidora 1
3 Vulcan-Hart 1GR45M ML-136408 Manual de instrucciones Freidora 1
4 Vulcan-Hart 1GR65C ML-136415 Manual de instrucciones Freidora 2
5 Vulcan-Hart 1GR45MF ML-136785 Manual de instrucciones Freidora 0
6 Vulcan-Hart 1GR45D ML-136411 Manual de instrucciones Freidora 7
7 Vulcan-Hart 1GR45M Manual de instrucciones Freidora 2
8 Vulcan-Hart 1GR65CF ML-136792 Manual de instrucciones Freidora 0
9 Vulcan-Hart 1GR45DF ML-136778 Manual de instrucciones Freidora 0
10 Vulcan-Hart 1GR65M Manual de instrucciones Freidora 0
11 Vulcan-Hart 1GR65MF ML-136786 Manual de instrucciones Freidora 0
12 Vulcan-Hart 1GR65D ML-136412 Manual de instrucciones Freidora 9
13 Vulcan-Hart 1GR65DF ML-136789 Manual de instrucciones Freidora 1
14 Vulcan-Hart 1GR65M ML-136409 Manual de instrucciones Freidora 1
15 Vulcan-Hart 1GR85M ML-136410 Manual de instrucciones Freidora 0
16 Alto-Shaam Inc.ASF-75E Manual de instrucciones Freidora 1
17 Alto-Shaam FRY TECH ASF-75E Manual de instrucciones Freidora 1
18 Alto-Shaam Inc.Gas Manual de instrucciones Freidora 1
19 Alto-Shaam FRY TECH ASF-60E Manual de instrucciones Freidora 5
20 Alto-Shaam FRYTECH ASF-60G Manual de instrucciones Freidora 6