Resumen del contenido incluido en la página 1
General Mobile Radio Service (GMRS) General Mobile Radio Service (GMRS) General Mobile Radio Service (GMRS) General Mobile Radio Service (GMRS) General Mobile Radio Service (GMRS)
Model Model:: GMRS-1200CH GMRS-1200CH
Model Model Model ::: GMRS-1200CH GMRS-1200CH GMRS-1200CH
Owner Owner Owner’s Man ’s Man ’s Manual ual ual
Owner Owner’s Man ’s Manual ual
EMG
CTC ID
OUT OF
RANGE
MODE
SCAN
EMG
Customer Service
1-800-290-6650
Released: 2-1-02.
Resumen del contenido incluido en la página 2
CAUTIONS NEVER ATTEMPT TO CHARGE ALKALINE OR DRY CELL BATTER- IES, AS BATTERIES MAY BURST CAUSING PERSONAL INJURY AND DAMAGE TO THE PRODUCT. WHEN RECHARGING NICKEL METAL HYDRIDE (Ni-MH) BATTERIES WITH THE AUDIOVOX CHARGER, USE ONLY AUDIOVOX APPROVED RECHARGE- ABLE BATTERIES. USE OF THE AUDIOVOX CHARGER WITH OTHER BRANDS OF BATTERIES IS NOT RECOMMENDED, AS BATTERY CHARGING TIMES WILL VARY WITH DIFFERENT BRANDS. REFER TO THE MANUFACTURER’S INSTRUCTIONS FOR CHARGING OTHER BRANDS OF BATTERIES. AVO
Resumen del contenido incluido en la página 3
Model GMRS-1200CH (FCC License Required) 5 6 4 16 8 3 3 13 (REF) EMG 12 CTC ID OUT OF 14 RANGE MODE 2 SCAN EMG 15 1 10 (REF) 9 11 1 7 1. Battery Door 11. Down Channel/Volume Button 2. Monitor/Backlight Button 12. MODE Button 3. Detachable Carry Clip 13. SCAN/Lock Button 4. Push-To-Talk (PTT) Button 14. Emergency (EMG) Call 5. Antenna Button 6. External Speaker(SPK)/Micro- 15. Power On/Off Control phone (MIC) Jacks 16. Combination Transmit Indi- 7. Built-in Speaker cator (Red)/Receive and 8. Li
Resumen del contenido incluido en la página 4
Model GMRS-1200 DISPLAY 8 1 9 2 EMG 10 3 CTC ID 11 4 12 5 13 OUT OF RANGE 6 14 7 15 1. Beep Tone Indicator: Icon appears when beep button confirmation tone is selected; icon disappears when tone is off. 2. Monitor Indicator: Icon appears when the Monitor (M) button is pressed and the channel monitor function is activated. 3. Key Lock Indicator: Icon appears when the keypad is locked. This function disables keys such as channel up/down and MODE. 4. Signal Strength Indicator: Icon appears
Resumen del contenido incluido en la página 5
11.Caller Identification (ID) Indicator: This indication appears when you select a caller identification code (between 1 and 10). ID selection operates in conjunction with the small segment display, and can also be used to identify a calling party in the monitor mode. 12.Small Segment Display: Displays the CTCSS tone option in the channel from (00-38). 13.Out of Range Indicator: Icon will be on steady when received signal strength is normal; icon flashes when signal strength becomes weak and in
Resumen del contenido incluido en la página 6
3. Various Brands of Rechargeable Batteries - Use of the supplied Audiovox charger with other brands of rechargeable batteries is not recommended, as battery charging times will vary with different brands of batteries.Refer to the manufacturer’s instructions for charging other brands of batteries. Installing the batteries: Battery installation is made more convenient when the carry clip is removed. To do this, release the spring latch securing the clip to radio and slide the clip downward and
Resumen del contenido incluido en la página 7
The following guidelines will improve performance and provide longer operating times for the GMRS-1200CH: 1. Do not mix old and new batteries. 2. The use of alkaline-type batteries is recommended to provide the longest operating time. 3. Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries. 4. If the unit is not to be used for an extended period of time, remove the batteries. Old or leaking batteries can cause damage to the unit and will void the warranty. MIC/(CHG)/SPK JACK ○○
Resumen del contenido incluido en la página 8
GMRS-1200CH OPERATIONAL MODES MODE CHANNEL SELECT CTCSS SELECT VOX SELECT DUAL WATCH ROGER BEEP BUTTON BEEP I D SELECT CALL SELECT Controls: Power On/Off (15) Button Press and hold the power on/off button ( ) for at least 2 seconds. You will hear a confirming melody to indicate the unit is on. To turn the unit off, press and hold the button for at least 2 seconds. Adjusting the Volume With the unit powered on, press the Up Channel/Volume button ( ) to increase volume and the Down Channel/Vo
Resumen del contenido incluido en la página 9
Monitor/Display Backlight Button (2) This button is used to check activity on the current frequency before transmitting. Check activity by pressing the Monitor (M) Button longer than 2 seconds; the icon will apppear on the display and you will hear static if frequency is clear. Do not transmit if you hear conversation. Hold down the Monitor Button again longer than 2 seconds and the icon will disapppear from the display. The monitor function will temporarily bypass the squelch setting an
Resumen del contenido incluido en la página 10
Up Channel/Volume Button (10) In the standby mode, pressing this button will increment the listening volume. When in function edit mode this button will be used to adjust the unit’s settings. Down Channel/Volume Button (11) In the standby mode, pressing this button will decrement the listening volume. When in function edit mode this button will be used to adjust the unit’s settings. Mode Button (12) This button is used to select the various GMRS feature settings such as channel/CTCSS code select
Resumen del contenido incluido en la página 11
GRMS Operation: - From GMRS standby mode, press and hold the ( ) button for 2 seconds to turn on power. - Press the MODE button so the Channel number flashes. - Select the desired channel with the Up (10) and Down (11) Buttons. When receiving a call, the signal strength meter appears to indicate incoming received signal strength and the Monitor section of the Transmit/Monitor LED (16) lights green. - Press and hold the PTT button (4) to transmit, then speak into t
Resumen del contenido incluido en la página 12
- Press the Up Button (10) briefly to move to the next higher main channel number. - Press the Down Button (11) briefly to move to the next lower main channel number. CTCSS Mode (Sub-Channel) Selection The Coded Tone Controlled Squelch System (CTCSS) provides 38 Sub-Fre- quencies. This feature allows you to utilize the coded squelch tones (01– 38) within a main channel. This enables you to communicate with another party on the same main channel using the same subcode. (This filters out unwanted
Resumen del contenido incluido en la página 13
nearby sound is detected and the radio transmits without the need to press the PTT button. To set radio for VOX operation: - From GMRS standby mode, press the MODE button three times until the VOX icon flashes on the display. - Press the Up or Down button to select VOX On (if oF appears flash- ing) and the 1-5 VOX level sensitivity. - Momentarily press the Power On/Off button to confirm the VOX selection. - The VOX icon will appear steady on the LCD display. VOX can be turned off by selecting
Resumen del contenido incluido en la página 14
Dual Watch Mode This feature allows you to monitor two channels at the same time. While in dual watch mode, the unit will continuously monitor both the primary and dual watch channel. Received signals will be played for 5 seconds, then the unit will resume scanning the two channels. Pressing the PTT button during a received transmission will set the unit to transmit on the same channel. Pressing the PTT button when no signal is received will set the unit to transmit on the primary channel. To
Resumen del contenido incluido en la página 15
Key Tone This feature allows the transceiver to sound a confirmation tone whenever the following keys are pressed: Monitor (M) Button, Up/Down Buttons, MODE Button, SCAN Button, or the EMG Button. To turn the key tones on or off: - From GMRS standby mode, press the MODE Button six times until bP, the Bell ( ) icon, and On or oF flash on the LCD display. - Press the Up or Down Button to toggle the key tone feature On or Off. - Press the PTT button momentarily to confirm selection. When the key
Resumen del contenido incluido en la página 16
- Press the Up or Down Button to preview and hear the 3 available call melodies. - Press the PTT button momentarily to confirm selection. Refer to the PTT button (4) to transmit ring signal. Auto Key Lock Selection Mode This feature prevents accidental channel change to the preferred settings of the unit. The Auto Key Lock function temporarily disables the MODE and SCAN Buttons. To access the Auto Key Lock selection menu: - From GMRS standby mode, press and hold the Scan Button for over 2 sec
Resumen del contenido incluido en la página 17
Out of Range Indication The GMRS-1200CH provides an Out-of-Range indication when reception is no longer intelligible or too weak to be discernible. When this condition occurs, the OUT OF RANGE message and icon appears on the display, reminding you that you are outside the 5-mile range of the unit, or that signal reception is being obstructed by native or man-made objects. Battery Alert When the battery icon ( ) blinks on the LCD panel, recharge unit or install fresh batteries. If
Resumen del contenido incluido en la página 18
Warning Do not operate the transceiver unless you are licensed to do so. • Remove the batteries from the transceiver if it is not expected to be used for long periods. This will eliminate the possibility of chemicals leaking from the batteries and corroding the transceiver. Avoid exposing the transceiver to water or extremes of temperature. Do not use this device in or near a mining facility, which uses remotely triggered explosives or in areas labeled “Blasting Area”. Premature or accid
Resumen del contenido incluido en la página 19
Troubleshooting Problem Possible cause Correction No transmission Weak batteries Charge or replace batteries while pressing Incorrect battery polarity Install the batteries the PTT Button following the directions in paragraph Installing the Batteries. Weak or no Weak batteries Charge or replace batteries signal received Channel and privacy Adjust the transceiver’s code not set the same settings to match those as target transceiver settings of the target transceiver Volume level too low Increase
Resumen del contenido incluido en la página 20
Frequency Range GMRS (15 Channels) 462.5500 - 462.7250 MHz Channel Spacing 12.5 kHz Privacy Codes 38 for each main channel Dimensions (W x H x D) 2.10 in x 3.86 in x 1.10 in (Without Antenna) 53.4 mm x 98 mm x 28 mm
Power Source Alkaline Batteries, AAA (4), 6 VDC Ni-MH rechargeable, AAA (4), 4.8 VDC, 650 mAh Operating Time 16-18 hours (Alkaline Batteries) (5: 5: 90 ratio based on alkaline batteries) Useable Sensitivity >-120 dBm Maximum Aud
