Resumen del contenido incluido en la página 1
Quality Control - Quantum 610
Inclusion of all Parts
QUANTUM
610
Joystick Serial Number
Controller Serial Number
Left Motor Serial Number
Right Motor Serial Number
Fit and Finish
Performance
Pride keeps a more detailed report on file at the factory.
Date Inspected
Inspector
Serial Number
*INFMANU2924*
1-800-800-8586 (US) 1-888-570-1113 (Canada)
Resumen del contenido incluido en la página 2
CONSIGNES DE SECURITE WARNING! A Pride Provider or a qualified technician must perform the initial setup of this power chair and must perform all of the procedures in this manual. The symbols below are used throughout this owner's manual and on the power chair to identify warnings and important information. It is very important for you to read them and understand them completely. WARNING! Indicates a potentially hazardous condition/situation. Failure to follow designated procedures can cause eit
Resumen del contenido incluido en la página 3
CONTENTS I. INTRODUCTION SAFETY I. INTRODUCTION ................................................................................................................................. 4 WELCOME to Quantum Rehab, a division of Pride Mobility Products (Pride). The power chair you have pur- chased combines state-of-the-art components with safety, comfort, and styling in mind. We are confident that these design features will provide you with the conveniences you expect during your daily activities. Once
Resumen del contenido incluido en la página 4
II. SAFETY II. SAFETY PRODUCT SAFETY SYMBOLS The symbols below are used on the power chair to identify warnings, mandatory actions, and prohibited actions. It is very important for you to read and understand them completely. Removal of grounding prong can create electrical hazard. If necessary, properly install an approved 3-pronged adapter to an electrical outlet having 2-pronged plug access. Read and follow the information in the owner’s manual. Wear safety goggles. Do not allow unsupervised
Resumen del contenido incluido en la página 5
II. SAFETY II. SAFETY Battery Set Configuration: Battery charger for indoor use only. + = Positive (Red) Terminal Post - = Negative (Black) Terminal Post Connect Red wires to Red Positive (+) Terminal Posts. Connect Black wires to Black Negative (–) Terminal Posts. Do not place power chair in freewheel mode on a decline. Do not place power chair in freewheel mode on an incline. Disposal and recycling - Contact your Quantum Rehab Provider for information on proper disposal and recycling of your P
Resumen del contenido incluido en la página 6
II. SAFETY II. SAFETY Weight Limitations GENERAL GUIDELINES Your power chair is rated for a maximum weight capacity. Please refer to the specifications table for this limit. MANDATORY! Do not operate your new power chair for the first time without completely reading Keep in mind that the maximum weight capacity includes the combined weight of the user and any accessories and understanding this owner’s manual. mounted to the power chair. Your power chair is a state-of-the-art life-enhancement dev
Resumen del contenido incluido en la página 7
II. SAFETY II. SAFETY WARNING! If your power chair is equipped with a reclining seatback, do not attempt to negotiate Public Streets and Roadways inclines with the seat in a reclined position. Do not attempt to negotiate obstacles with the seat in a reclined position unless an attendant is present to help stabilize the chair. Failure to heed WARNING! You should not operate your power chair on public streets and roadways. Be aware could result in the power chair tipping over. that it may be diffi
Resumen del contenido incluido en la página 8
II. SAFETY II. SAFETY WARNING! Pride does not recommend using the power chair as a seat in a motor vehicle. The power chair user should transfer into the vehicle seat and use the vehicle-installed belt restraint system if and whenever feasible. WARNING! Always be sure your power chair and its batteries are properly secured when it is being transported. Batteries should be secured in an upright position and protective caps should be installed on the battery terminals. Batteries should not be tran
Resumen del contenido incluido en la página 9
II. SAFETY II. SAFETY Transfers Flammability Precautions Transferring onto and off of your power chair requires a WARNING! Even though the plastics used on your power chair have been tested and have passed good sense of balance. Always have an attendant or the applicable flammability standards, Pride recommends that you do not expose your power healthcare professional present while learning to prop- chair to open flames. erly transfer yourself. WARNING! Replace worn or damaged upholstery immedi
Resumen del contenido incluido en la página 10
III. YOUR POWER CHAIR III. YOUR POWER CHAIR THE QUANTUM 610 The Quantum 610 has two main assemblies: the seat assembly and the power base assembly. See figure 5. Typi- REAR SHROUD FASTENER cally, the seat assembly includes the armrests, seatback, and seat base. The power base assembly includes two motor/brake assemblies, two drive wheels, four caster wheels, two batteries, and wiring harnesses. See figure 5, TRAPEZE BARS 6, and 7. FRONT COVER SEATBACK ARMRESTS SEAT ASSEMBLY MOTOR/BRAKE ASSEMBLY
Resumen del contenido incluido en la página 11
III. YOUR POWER CHAIR III. YOUR POWER CHAIR Main Circuit Breaker: The main circuit breaker is a safety feature built into your power chair. When the Manual Freewheel Levers batteries and the motors are heavily strained (e.g., from excessive loads), the main circuit breaker trips to prevent Your power chair has a manual freewheel lever on each motor. Manual freewheel levers enable you to disengage damage to the motors and the electronics. If the circuit trips, allow your power chair to “rest” for
Resumen del contenido incluido en la página 12
IV. ASSEMBLY IV. ASSEMBLY INITIAL ASSEMBLY Seat Installation Your power chair may require some assembly either before initial use or after transportation. It may also require It may be necessary to install the seat either prior to disassembly to make some comfort adjustments. Figure 10 details those parts of the power chair that are designed initial operation or after transporting your power chair. REAR to be disassembled and assembled by an end user or by a qualified caregiver before using the
Resumen del contenido incluido en la página 13
V. COMFORT ADJUSTMENTS IV. ASSEMBLY COMFORT ADJUSTMENTS Power Seat Option Installation After becoming familiar with your power chair’s operation, you may find the need to make some adjustments to Your power chair may be equipped with the power seat increase your comfort, such as seat height and angle, armrest angle, foot platform height and angle, and controller option. While the seat itself may be any one of the styles position. If your power chair is equipped with power positioning options, re
Resumen del contenido incluido en la página 14
V. COMFORT ADJUSTMENTS V. COMFORT ADJUSTMENTS Seat Position To change the armrest width: You can move the seat forward or rearward by changing 1. Locate the two armrest knobs on each side of the the extrusion mounting position. armrest receiver bracket. See figure 18. 2. Loosen the knobs. SETSCREW To change the position: 3. Slide the armrests in or out to the desired width. 1. Turn off the power to the controller. 4. Tighten the knobs. 2. Loosen the rear shroud fasteners and remove the rear shro
Resumen del contenido incluido en la página 15
V. COMFORT ADJUSTMENTS V. COMFORT ADJUSTMENTS Positioning Belt Foot Platform Height Adjustment Your power chair may be equipped with a positioning belt The foot platform height is easily adjusted to different that can be adjusted for operator comfort. See figure 23. heights. FOOT PLATFORM The positioning belt is designed to support the operator so RETAINING PIN SECUREMENT NUT that he/she does not slide down or forward in the seat. The To raise or lower the foot platform: positioning belt is no
Resumen del contenido incluido en la página 16
V. COMFORT ADJUSTMENTS VI. BATTERIES AND CHARGING WARNING! The power elevating seat option is intended for use on a level surface only. Never BATTERIES AND CHARGING raise the seat from its lowest position on an inclined surface. Failure to heed this warning can The Quantum 610 uses two long-lasting, 12-volt, deep-cycle batteries. These batteries are sealed and maintenance result in the power chair tipping over. free. Since they are sealed, there is no need to check the electrolyte (fluid) level.
Resumen del contenido incluido en la página 17
VI. BATTERIES AND CHARGING VI. BATTERIES AND CHARGING To charge the batteries using the off-board charger: How often must I charge the batteries? 1. Position the front of your power chair next to a Many factors come into play when deciding how often to charge the batteries. You may use your power chair all standard electrical outlet. day on a daily basis or you may not use it for weeks at a time. 2. Be certain the controller power is turned off and the freewheel levers are in the engaged positi
Resumen del contenido incluido en la página 18
VII. CARE AND MAINTENANCE VI. BATTERIES AND CHARGING How can I ensure maximum battery life? CARE AND MAINTENANCE A fully charged deep-cycle battery will provide reliable performance and extended battery life. Keep your power Your Quantum 610 is a sophisticated power chair. Like any motorized vehicle, it requires routine maintenance chair’s batteries fully charged whenever possible. Batteries that are regularly and deeply discharged, infrequently checks. You can perform some of these checks, but
Resumen del contenido incluido en la página 19
VII. CARE AND MAINTENANCE VII. CARE AND MAINTENANCE All wheel bearings are prelubricated and sealed. They require no subsequent lubrication. Storage The body shroud has been sprayed with a clear sealant coating. You can apply a light coat of car wax to help Your power chair should be stored in a dry place, free from temperature extremes. When storing, disconnect the it retain its high-gloss appearance. batteries from the power chair. See VI. “Batteries and Charging.” Check all electrical conne
Resumen del contenido incluido en la página 20
VII. CARE AND MAINTENANCE VII. CARE AND MAINTENANCE WARNING! Do not mix old and new batteries. Always replace both batteries at the same time. REAR RIM HALF TIRE AXLE KEY PROHIBITED! Keep tools and other metal objects away from the battery terminals. Contact with tools can cause electrical shock. TUBE WHEEL To replace the batteries: AXLE HUB 1. Turn off the power to the controller. SLOT FRONT RIM 2. Make sure that the power chair is in drive mode. See III. “Your Power Chair.” HALF 3. Loosen t
