Resumen del contenido incluido en la página 1
EN
User manual 2
Washing Machine
ZWG 5125
Resumen del contenido incluido en la página 2
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 13 Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 15 Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 18 First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6 Consumption values _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 19 Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6 In
Resumen del contenido incluido en la página 3
• Always be sure, that there is no water leakage from Child safety hoses and their connections after the installation. • This appliance is not intended for use by persons (in- • If the appliance is installed in a location subject to frost, cluding children) with reduced physical sensory or please read the “dangers of freezing” chapter. mental capabilities or lack of experience and knowl- edge unless they have been given supervision or in- • Any plumbing work required to install this appliance sh
Resumen del contenido incluido en la página 4
Product description 1 Detergent dispenser drawer 1 2 2 Control panel 3 Door opening handle 4 Rating plate 5 Drain pump 6 Adjustable feet 3 4 5 6 Detergent dispenser drawer Compartment for detergent used for prewash and soak phase or for stain remover used during the stain action phase (if available). The prewash and soak deter- gent is added at the beginning of the wash programme. The stain remover is added during the stain action phase. Compartment for powder or liquid detergent used for main
Resumen del contenido incluido en la página 5
Control panel Below is a picture of the control panel. It shows the programme selector dial as well as the buttons and pilot lights. These are presented by relevant numbers on the following pages. 1 2 3 4 5 6 7 1 Programme selector dial 5 START/PAUSE button 2 SPIN reduction button 6 DELAY START button 3 OPTIONS button 7 Indicator pilot lights 4 EXTRA RINSE button Table of symbols Cottons Special programmes Synthetics Rinse Hold Programme selector dial, spin speed button and available options Pro
Resumen del contenido incluido en la página 6
performed. This option is recommended for people who When selecting a washing programme both lights 7.1 are allergic to detergents, and in areas where the water is and 7.2 illuminate. very soft. After having pressed the button 5 the only light corre- Start Pause sponding to the running phase stays on. The machine starts working and the door is locked. This button allows you to start or to interrupt the selected The light 7.3 illuminates at the end of the washing cycle. programme. After a few min
Resumen del contenido incluido en la página 7
Start the programme by pressing button 5 Pull out the dispenser drawer until it stops. Measure To start the selected programme, press the button 5 , the out the amount of detergent required, pour it into the corresponding green pilot light stops blinking. The pilot main wash compartment or in the appropriate com- light corresponding to the running phase illuminates. The partment if the selected programme/option it requires appliance starts operating and the door is locked. (see more details in
Resumen del contenido incluido en la página 8
2. Select the draining or spinning programme. Remove the laundry from the drum and carefully check that the drum is empty. If you do not intend to carry out 3. Reduce the spin speed if needed, by pressing the another wash, close the water tap. Leave the door open to relevant button. prevent the formation of mildew and unpleasant smells. 4. Press button 5 . At the end of the programme, the door can be now opened. Turn the programme selector dial to to switch the machine off. Stand by : once the
Resumen del contenido incluido en la página 9
• liquid detergents, preferably for low temperature wash Follow the product manufacturers’ instructions on quan- programmes (60°C max) for all types of fabric, or spe- tities to use. cial for woollens only. Use less detergent if: The detergent and any additives must be placed in the • you are washing a small load appropriate compartments of the dispenser drawer before • the laundry is lightly soiled starting the wash programme. • large amounts of foam form during washing. If using liquid deterge
Resumen del contenido incluido en la página 10
Programme Maximum and Minimum Temperature Cycle Description Detergent Options Maximum Spin Speed Compartment Maximum Fabrics Load Type of Laundry 2) COTTONS SPIN REDUCTION 60° - 40° - 30° RINSE HOLD Main wash - Rinses PREWASH 1) Maximum spin speed at 1200 rpm EXTRA QUICK Max. load 6 kg - Reduced load 3 kg EXTRA RINSE White and coloured cotton (normally soiled items). 2) SYNTHETICS SPIN REDUCTION 60° - 40° - 30° RINSE HOLD Main wash - Rinses PREWASH 1) Maximum spin speed at 900 rpm EXTRA QUIC
Resumen del contenido incluido en la página 11
Programme Maximum and Minimum Temperature Cycle Description Detergent Options Maximum Spin Speed Compartment Maximum Fabrics Load Type of Laundry WOOL SPIN REDUCTION 40° RINSE HOLD Main wash - Rinses Maximum spin speed at 900 rpm Max. load 2 kg Washing programme for machine washable wool as well as for hand washable woollens and delicate fabrics. Note : A single or bulky item may cause imbalance. If the appliance doesn’t perform the final spin phase, add more items, redistribute the load manuall
Resumen del contenido incluido en la página 12
Programme Maximum and Minimum Temperature Cycle Description Detergent Options Maximum Spin Speed Compartment Maximum Fabrics Load Type of Laundry SOAK 30° Prewash - Soak for about 40 minutes - Stop with water in the tub Max. load 6 kg Special programme for heavily soiled laundry. The machine performs a soak at 30°C. At the end of this time the machine will stop automatically with water left in the tub. Before starting a new washing phase, it is necessary to empty out the water by: • Draining on
Resumen del contenido incluido en la página 13
Programme Maximum and Minimum Temperature Cycle Description Detergent Options Maximum Spin Speed Compartment Maximum Fabrics Load Type of Laundry SPIN SPIN REDUCTION Drain and long spin Maximum spin speed at 1200 rpm Max. load 6 kg Separate spin for hand washed cotton garments and after pro- grammes with the Rinse Hold option selected. You can choose the spin speed by pressing the relevant button to adapt it to the fabrics to be spun. = OFF For cancelling the programme which is running or to s
Resumen del contenido incluido en la página 14
Cleaning the drawer recess Remove any objects from the pump impeller by ro- Having removed the draw- tating it. er, use a small brush to Put the cap back on the clean the recess, ensuring emergency emptying hose that all washing powder and place the latter back in residue is removed from its seat. the upper and lower part of the recess. Screw the pump cover fully in. Replace the drawer and run the rinse programme with- Close the pump door. out any clothes in the drum. Cleaning the pump The pump
Resumen del contenido incluido en la página 15
• Screw the water inlet hose back on and reposition the emergency emptying hose after having put the cap on again. • When you intend to start the machine up again, make sure that the room temperature is above 0°C. Emergency emptying out If the water is not discharged, proceed as follows to empty out the machine: • Unscrew the hose from the machine. Keep a rag • pull out the plug from the power socket; nearby because some water may flow. • close the water tap; • Clean the filter in the valve with
Resumen del contenido incluido en la página 16
Problem Possible cause/Solution The door has not been closed (the button 5 red light blinks). • Close the door firmly. The plug is not properly inserted in the power socket. • Insert the plug into the power socket. There is no power at the socket. • Please check your domestic electrical installation. The washing machine does not start: The main fuse has blown. • Replace the fuse. The programme selector dial is not correctly positioned and the button 5 has not been pressed. • Please turn the sele
Resumen del contenido incluido en la página 17
Problem Possible cause/Solution Too much detergent or unsuitable detergent (creates too much foam) has been used. • Reduce the detergent quantity or use another one. Check whether there are any leaks from one of the inlet hose fittings. It is not always easy to see this as the water runs down the hose; check to see if it is damp. There is water on the floor: • Check the water inlet hose connection. The drain or inlet hose is damaged. • Replace it with a new one. The cap on the emergency emptying
Resumen del contenido incluido en la página 18
Problem Possible cause/Solution The electronic unbalance detection device has cut in because the laundry is not evenly distributed in the drum. The laundry is redistributed by reverse rotation of the drum. This may happen several times before the unbalance disappears and normal spinning can resume. If, after 10 minutes, the laundry is still not evenly distributed in the drum, the machine will not spin. In this Spinning starts late or the machine case, redistribute the load manually and select th
Resumen del contenido incluido en la página 19
Consumption values Programme Energy consumption Water consumption (litres) Programme duration (Mi- (KWh) nutes) White Cottons 95° 2,0 61 135 Cottons 60° 1.3 58 125 1) 1.02 46 150 Cotton ECO 60° Cottons 40° 0.7 58 115 Synthetics 40° 0.5 50 80 Delicates 40° 0.55 60 65 Wool/ Handwash 30° 0.25 53 55 1) «Cottons Eco» at 60°C with a load of 6 kg is the reference programme for the data entered in the energy label, in compliance with EEC 92/75 standards. The consumption data shown on this chart is to b
Resumen del contenido incluido en la página 20
Positioning Install the machine on a flat hard floor. Make sure that air circulation around the machine is not impeded by carpets, rugs etc. Check that the machine does not touch the wall or other kitchen units. Level the washing machine by 35° 45° raising or lowering the feet. The feet may be tight to adjust as they incorporate a self locking nut, but the machine MUST be level and stable. Any necessary adjustment can be made with a spanner. The other end of the inlet hose which connects to the
