Resumen del contenido incluido en la página 1
Instructions for use
WASHING MACHINE
Contents
GB
Installation, 2-3-4-5
GB
Unpacking and levelling
Connecting the electricity and water supplies
English,1
The first wash cycle
Technical data
Care and maintenance, 6
Cutting off the water or electricity supply
Cleaning the washing machine
Cleaning the detergent dispenser drawer
Caring for the door and drum of your appliance
Cleaning the pump
Checking the water inlet hose
Precautions and tips, 7
General safety
Disposal
HV8D 393
Description of the wa
Resumen del contenido incluido en la página 2
Installation ! Keep this instruction manual in a safe place 2. If the floor is not perfectly level, compensate GB for future reference. Should the appliance be for any unevenness by tightening or loosening sold, transferred or moved, make sure the the adjustable front feet (see figure); the an- instruction manual accompanies the washing gle of inclination, measured according to the machine to inform the new owner as to its worktop, must not exceed 2°. operation and features. Levelling your ap
Resumen del contenido incluido en la página 3
65 - 100 cm Connecting the drain hose • the supply voltage is included within the GB values indicated on the Technical Data Plate Connect the drain fixed on the machine. hose, without bending • the socket is compatible with the washing it, to a draining duct machine’s plug. If this is not the case, repla- or a wall drain situa- ce the socket or the plug. ted between 65 and Your appliance is now supplied with a 13 amp 100 cm from the floor; fused plug it can be plugged into a 13 amp so
Resumen del contenido incluido en la página 4
As the colours of the wires in the lead may not ! The power supply cable must only be repla- GB correspond with the coloured markings iden- ced by an authorised serviceman. tifying the terminals in your plug, proceed as follows: Warning! The company denies all liability if and Connect Green & Yellow wire to terminal when these norms are not respected. marked E or or coloured Green or Green & Yellow. The first wash cycle Connect Brown wire to terminal marked L or coloured Red. Once the appli
Resumen del contenido incluido en la página 5
GB 5
Resumen del contenido incluido en la página 6
Care and maintenance 2. unscrew the lid Cutting off the water and electri- GB by rotating it anti- city supplies clockwise (see figu- • Turn off the water tap after every wash cycle. re): a little water may This will limit wear on the hydraulic system in- trickle out. This is side the washing machine and help to prevent perfectly normal; leaks. • Unplug the washing machine when cleaning it and during all maintenance work. Cleaning the washing machine The outer parts and rubber components
Resumen del contenido incluido en la página 7
Precautions and tips ! This washing machine was designed and constructed in GB accordance with international safety regulations. The fol- lowing information is provided for safety reasons and must therefore be read carefully. General safety • This appliance was designed for domestic use only. • This appliance can be used by children aged from 8 years and above and persons with re- duced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supe
Resumen del contenido incluido en la página 8
Description of the washing machine Control panel GB ON/OFF CHILD LOCK SPIN SPEED button button button DISPLAY START/PAUSE MEMORY button with Detergent dispenser drawer FUNCTION button indicator light WASH buttons CYCLE SELECTOR DELAY buttons TEMPERATURE START button button Detergent dispenser drawer: used to dispense deter- This means it is possible to prevent wash cycles from gents and washing additives (see “Detergents and laundry”). being modified accidentally, especially where t
Resumen del contenido incluido en la página 9
Display GB F A B D C E F The display is useful when programming the machine and provides a great deal of information. The two upper strings A and B provide details of the wash cycle selected, the wash cycle phase in progress and all informa- tion relating to the progress status of the wash cycle. String C shows the time remaining until the end of the wash cycle in progress and, if a DELAY START has been set, the time remaining until the start of the selected wash cycle. String D shows the maxim
Resumen del contenido incluido en la página 10
Running a wash cycle 1. SWITCH THE MACHINE ON. Press the On/Off selected will flash and only the second function will GB button ; the text HELLO will appear on the display be activated; the indicator light corresponding to the and the START/PAUSE indicator light will flash slowly in enabled function will remain lit. a green colour. ! The functions may affect the recommended load value and/or the duration of the cycle. 2. LOAD THE LAUNDRY. Open the porthole door. Load the laundry, making sure
Resumen del contenido incluido en la página 11
Wash cycles and functions Table of wash cycles GB Detergents Max. Max. Description of the wash cycle temp. speed (°C) (rpm) Cotton Standard 60° (Standard Cotton) (1) (1st press of the button): heavily 60° 1300 8 53 1.09 55 210’ soiled whites and delicate colours. (Max. 90°) Cotton Standard 40° (Standard Cotton) (2) (2nd press of the button): lightly 40° 1300 8 53 1.01 84 190’ soiled whites and delicate colours. Cotton Standard 20° (Standard Cotton) (3rd press of the button): lightly s
Resumen del contenido incluido en la página 12
Detergents and laundry Baby: use the special wash cycle to remove the remove Detergent dispenser drawer GB the soiling typically caused by babies, while removing all Good washing results also depend on the correct dose of traces of detergent from nappies in order to prevent the detergent: adding too much detergent will not necessarily delicate skin of babies from suffering allergic reactions. The result in a more efficient wash, and may in fact cause a cycle has been designed to reduce t
Resumen del contenido incluido en la página 13
Troubleshooting Your washing machine could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure GB that the problem cannot be solved easily using the following list. Problem: Possible causes / Solutions: The machine does not switch on. • The appliance is not plugged into the socket fully, or not enough to make contact. • There is no power to the socket, or the fuse has blown in the mains plug. The wash cycle does not start. • The door is not closed prop
Resumen del contenido incluido en la página 14
The machine is noisy. • There will always be some motor, pump and drum noise during spin. GB The machine wont spin properly. • Out of Balance detected when attempting to go into a spin cycle - If this happens the machine will continue to try to repeat the distribution of the load required before the machine will go into higher spin speeds - This will increase the programme time accordingly. This is a safety feature to prevent damage. Out of Balance can be caused by washing a single heavy it
Resumen del contenido incluido en la página 15
Assistance Guarantee GB 12 Months Parts and Labour Guarantee Your appliance has the benefit of our manufacturer’s guarantee, which covers the cost of breakdown repairs for twelve months from the date of purchase. This gives you the reassurance that if, within that time, your appliance is proven to be defective because of either workmanship or materials, we will, at our discretion, either repair or replace the appliance at no cost to you. This guarantee is subject to the following conditions:
Resumen del contenido incluido en la página 16
195110444.01 09/2013 - Xerox Fabriano After Sales Service GB No one is better placed to care for your Hotpoint appliance during the course of its working life than us - the manufacturer. Essential Contact Information Hotpoint Service We are the largest service team in Europe offering you access to 400 skilled telephone advisors and 1000 fully qualified engineers on call to ensure you receive fast, reliable, local service. UK: 08448 224 224 Republic of Ireland: 0818 313 413 www.hotpointserv
