Resumen del contenido incluido en la página 1
Washing Machine Instruction Manual
DWC-LD141X, DWD-LD141X
INSTRUCTION MANUAL
■ Economic wash system
Using artificial intelligence, the washer uses minimum energy and water by selecting optimal water level and
washing time.
■ Low noise system
The washer minimizes the washing and spinning noises by sensing the amount of laundry.
■ Child-Lock
The Child-Lock system has been used to prevent children from pressing any button to change the program
during operation.
■ Air bubble washing
Resumen del contenido incluido en la página 2
Contents PARTS AND FEATURES ...............................................................................................................3 WASHER SAFETY ..........................................................................................................................4 INSTALLATION INSTRUCTIONS ..................................................................................................5 INLET HOSE CONNECTION .........................................................................
Resumen del contenido incluido en la página 3
E Plarts and features The parts and features of your washer are illustrated on the page. Become familiar with all parts and features before using your washer. NOTE The drawings in the book may vary from your washer model. They are designed to show the different features of all models coverd by this book. Your model may not include all features. INLET HOSE POWER CORD DETERGENT CASE CONTROL PANEL HOSE DRAIN DOOR COVER PUMP Accessories Cap holder Guide Hose Drain Spanner Inlet hose Ma
Resumen del contenido incluido en la página 4
Washer safety Save these instructions Your safety is important to us. To reduce the risk of fire, electrical shock, or injury when using your washer adhere to the following basic precautions. Read all instructions before using your washer • Flammable fluids (dry-cleaning solvents, Please ... kerosene, gasoline, etc.) should not be used or • Have only a qualified person install, repair, or stored in or near your washer. Do replace parts on washer. not add fla
Resumen del contenido incluido en la página 5
E Inlstallation instructions Removing transit bolts 1. Before operating the washer, remove the transit 2. Unscrew the 4 bolts with the 10mm hex wrench bolts(4ea) along with the rubber. or spanner or cross-tip screwdriver. Keep the 4 • I f the bolts are not removed, it may cause bolts for a later time. heavy vibration, noise and malfunction. • W hen the appliance is transported, transit bolts will be re-used. 3. Close the holes with the cap holders supplied. Location of washer • Check
Resumen del contenido incluido en la página 6
Inlet hose connection The washer should be connected to the water mains using new hose sets and old hose sets should not be reused. In using only one water tap or in case of only one water inlet valve, connect the inlet hose to the cold water inlet valve. Option : Be careful not to confuse hot water inlet and cold water inlet. For Ordinary Tap P ull down the collar of the inlet L oosen the four screws properly F it the water tap adapter into hose to separate it from the in order to f
Resumen del contenido incluido en la página 7
Electrical requirements Electrical shock hazard Failure to follow these instructions could result in death or serious injury. WARNING • Electrical earth is required on this washer • Don’t earth to a gas pipe. • If it does not fit the outlet, have a proper outlet • Don’t change the power supply cord plug. installed by a qualified electrician. • Check with a qualified electrician if you are not sure the washer is properly earthed. Recommended earthing method C For your personal safety, this wa
Resumen del contenido incluido en la página 8
Electrical requirements (cont.) Adjust the level of washer using adjustable legs. • Please check if there is any gap between the four adjustable legs and the floor. • A djust the level of washer by turning adjustable legs. And make it sure that there is no swaying of washer. adjustable leg Fixing Nut • After the adjustment is finished, turn the fixing nuts up tightly so that the washermaintains the adjustment. Make it sure that the washer does not sway when you press down the fo
Resumen del contenido incluido en la página 9
Operating your washer (cont.) Sorting • Separate heavily soiled items from lightly soiled ones, even if they would normally be washed together. • Separate dark colors from light colors, colorfast items from non-colorfast item. Soil (Heavy, Normal, Light) Separate clothes according to amount of soil. Color (White, Lights, Darks) Separate white clothes from colored clothes. Lint (Lint producers,Collectors) Wash lint producers and lint collectors separately. Loading • Drop items into washer loose
Resumen del contenido incluido en la página 10
Option Steam(option) Water +(option) The functions of the control panel ■ DWC-LD141X Option Low Temp Iron Cupboard Very Time Steam(option) Water +(option) Press this switch to turn the power on or off. Option Operation and temporary stop is repeated as it is pressed. Option When you want to change program in operating; Steam(option) Water +(option) press the “Start/Pause” button → Select the program that you want to change → press the “Start/Pause” button again. Steam(option) Water +(option) Y
Resumen del contenido incluido en la página 11
The functions of the control panel (cont.) ■ DWD-LD141X Option Steam(option) Water +(option) Press this switch to turn the power on or off. Option Operation and temporary stop is repeated as it is pressed. Option When you want to change program in operating; Steam(option) press the “Start/Pause” button → Select the program that you want to change → Water +(option) press the “Start/Pause” button again. Steam(option) Option Water +(option) Low Temp Iron Cupboard Very Time You can select the cours
Resumen del contenido incluido en la página 12
Washing procedure and program selection 1. Cotton is automatically selected upon power on • Press the Power button to start. • Press the Start/Hold button • Initial condition - Program : Cotton - Wash : main wash - Rinse : 3 times - Spin : 800 - Water temperature : 40°C 2. MANUAL SELECTING • Press the Power button to start • Select the conditions which you want to use by turning the program dial and pressing each button. • Press the Start/Pause b
Resumen del contenido incluido en la página 13
Washing procedure and program selection (cont.) 4. FUNCTION • Recommended programs according to the laundry type Fabric Proper Maximum Program Option Type Temp. Load First check if laundry is machine 60°C Pre Wash washable.(white cotton, linen (Cold, 30°C, Rating Rinse+ towel and sheets..) 40°C, 95°C) Cotton/Normal Colorfast garments 40°C (shirts, night dresses, pajamas..) Pre Wash (Cold, 30°C, Rating and lightly soiled white cottons Rinse+ 60°C) (underwear..) 30°C Pre Wash Less than Synthet
Resumen del contenido incluido en la página 14
Washing procedure and program selection (cont.) * COTTON/NORMAL PROGRAM Put the laundry in to the drum. Put detergent and softener into the detergent case. Then close the door. • Put detergent into the main wash and prewash compartments in the detergent case. 1 Softener should be below the ‘MAX’ level. • Put detergent into the pre wash compartment only if you want to add prewash. • When you want to use bleach, put it into the main wash compartment with detergent. Press the Power button.
Resumen del contenido incluido en la página 15
Washing procedure and program selection (cont.) * SYNTHETIC PROGRAM Put the laundry in the drum. Put detergent and softener into the detergent case. Then close the door. • Put detergent into the main wash and prewash compartments in the detergent case. 1 Softener should be below the ‘MAX’ level. • Put detergent into the pre wash compartment only if you want to add prewash. • W hen you want to use bleach, put it into the main wash compartment with detergent. Press the Power button. 2
Resumen del contenido incluido en la página 16
Washing procedure and program selection (cont.) * DELICATE / HANDWASH PROGRAM Put the laundry in the drum. Put detergent and softener into the detergent case. Then close the door. • P ut detergent into the main wash compartments in the detergent case. 1 Softener should be below the ‘MAX’ level. • W hen you want to use bleach, put it into the main wash compartment with detergent. Press the Power button. 2 • The LED shows only ‘---’ and all Program Lights turn on. Select
Resumen del contenido incluido en la página 17
Washing procedure and program selection (cont.) * INTENSIVE PROGRAM Put the laundry in the drum. Put detergent and softener into the detergent case. Then close the door. • P ut detergent into the main wash and prewash compartments in the detergent case. 1 Softener should be below the ‘MAX’ level. • Put detergent into the pre wash compartment only if you want to add prewash. • When you want to use bleach, put it into the main wash compartment with detergent. Press the Power button. 2
Resumen del contenido incluido en la página 18
Washing procedure and program selection (cont.) * QUICK 20 Put the laundry in the drum. Put detergent and softener into the detergent case. Then close the door. • P ut detergent into the main wash compartments in the detergent case. Softener 1 should be below the ‘MAX’ level. • W hen you want to use bleach, put it into the main wash compartment with detergent. Press the Power button. 2 • The LED shows only ‘---’ and all Program Lights turn on. Select the ‘Quick’ program using progra
Resumen del contenido incluido en la página 19
Washing procedure and program selection (cont.) * SPORTS WEAR PROGRAM Put the laundry in the drum. Put detergent and softener into the detergent case. Then close the door. • Put detergent into the main wash and prewash compartments in the detergent case. 1 Softener should be below the ‘MAX’ level. • P ut detergent into the pre wash compartment only if you want to add prewash. • When you want to use bleach, put it into the main wash compartment with detergent. Press the Power button
Resumen del contenido incluido en la página 20
Washing procedure and program selection (cont.) * TUB CLEAN PROGRAM Press the Power button. 1 • The LED shows only ‘---’ signal. Select the ‘Tub Clean’ program using program selection dial. 2 • ‘Soak’ and spin ‘400’ rpm and ‘Cold’ water temperature. Press Start/Pause button. 3 • The washer will be operated with locking Door and supplying water. NOTE • A ll programs are not selectable. • Use this program WITHOUT load. • The appropriate cleaning time is one time per a month. E-20
