Resumen del contenido incluido en la página 1
Model No. PFTL69711
USER'S MANUAL
Serial No.
Find the serial number in the location
shown below. Write the serial number
in the space above for reference.
Serial Number
Decal
QUESTIONS?
If you have questions, or if there
are missing or damaged parts,
we will guarantee complete sat-
isfaction through direct assis-
tance from our factory.
TO AVOID DELAYS, PLEASE
CALL DIRECT TO OUR TOLL-
FREE CUSTOMER HOT LINE.
The trained technicians on our
Customer Hot Line will provide
immediate assistance, fr
Resumen del contenido incluido en la página 2
TABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 O
Resumen del contenido incluido en la página 3
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill. 1. It is the responsibility of the owner to ensure 12. Failure to use a properly functioning surge that all users of this treadmill are adequately suppressor could result in damage to the con- informed of all warnings and precautions. trol system of the treadmill. If the control sys- tem is damaged, the wa
Resumen del contenido incluido en la página 4
22. When using iFIT.com CD’s and videos, an 25. Inspect and properly tighten all parts of the electronic “chirping” sound will alert you treadmill regularly. when the speed and/or incline of the treadmill is about to change. Always listen for the 26. Never insert or drop any object into any “chirp” and be prepared for speed and/or in- opening. cline changes. In some instances, the speed and/or incline may change before the per- 27.DANGER: Always unplug the power sonal trainer describes the chan
Resumen del contenido incluido en la página 5
BEFORE YOU BEGIN ® Thank you for selecting the new PROFORM e35s Department toll-free at 1-800-999-3756, Monday treadmill. The e35s treadmill combines advanced tech- through Friday, 6 a.m. until 6 p.m. Mountain Time (ex- nology with innovative design to help you get the most cluding holidays). To help us assist you, please note from your exercise program in the convenience of your the product model number and serial number before home. And when you’re not exercising, the unique e35s calling. The
Resumen del contenido incluido en la página 6
ASSEMBLY Assembly requires two people. Set the treadmill in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench and your own 7/16” and 9/16” wrenches , rubber mallet , wire cutters , and Phillips screwdriver. Use the part chart attached in the center of this manual to identify small parts used in assembly. Each
Resumen del contenido incluido en la página 7
4. Locate the Belly Pan Wire Harness (124). Route the Belly 58 4 Pan Wire Harness over the Base (117) as shown. 124 55 Connect the Belly Pan Wire Harness to the Wire Harness (55). See the bottom inset drawing. The connectors should slide together easily and “snap” into place. If the connectors do not slide easily and snap into place, turn a connector and try again. See the top inset drawing. Carefully wrap the wires around the connectors as shown. Insert the connectors and the excess Wire 117 Ha
Resumen del contenido incluido en la página 8
7a.See the inset drawing. Identify the Right Top Handgrip 7a (53); there are identifying marks inside the Handgrips. Set the Right Top Handgrip on the right Handgrip Post (41). Insert two 1/2” Screws (51) into the two holes in Left Right the Handgrip Post indicated by the arrows. Tighten Bosses 53 21 the Screws into the Right Top Handgrip. 53 Important: Be careful not to insert the two 1/2” Screws (51) into the wrong holes in the Handgrip 41 Post (41), or tighten the Screws into the plastic bos
Resumen del contenido incluido en la página 9
9. Attach the Latch Assembly (37) and the Latch Spacer 9 (39) to the Left Bottom Handgrip (40) with two Latch Ridge Screws (36). Firmly tighten the Latch Screws. Note: The ridge on the Latch Spacer must be on the side shown. If there are plastic ties around the left and right Pulse Sensor Plates (2), cut off the plastic ties. 39 2 40 37 36 10. Attach the Hood Cover (3) to the treadmill with four 1/2” 10 1 Screws (51). Firmly tighten the Screws. 3 Peel the backing off the Hood Decal (1). Positio
Resumen del contenido incluido en la página 10
OPERATION AND ADJUSTMENT TM THE PERFORMANT LUBE WALKING BELT an equipment-grounding conductor and a grounding plug. Plug the power cord into a surge suppressor, Your treadmill features a walking belt coated with and plug the surge suppressor into an appropriate TM PERFORMANT LUBE , a high-performance lubricant. outlet that is properly installed and grounded in IMPORTANT: Never apply silicone spray or other accordance with all local codes and ordinances. substances to the walking belt or the walk
Resumen del contenido incluido en la página 11
CONSOLE DIAGRAM Manual/Program Indicators Display Program Display Display Program Profiles Note: If there is a thin sheet of plastic Clip on the face of the console, remove it. Key The console also features new iFIT.com interactive technology. IFIT.com technology is like having a per- CAUTION: Before operating the sonal trainer right in your home. Using the included console, read the following precautions. audio cable, you can connect the treadmill to your home stereo, portable stereo, or compu
Resumen del contenido incluido en la página 12
HOW TO TURN ON THE POWER Each time a button is pressed, the speed setting will change by 0.1 mph; if a button is held down, the speed setting will change in increments of 0.5 Plug in the power cord (see page 10). 1 mph. To change the speed setting quickly, press the Quick Speed buttons. Note: The console can display speed and distance in either miles or Locate the on/off 2 kilometers. For simplicity, all instructions in switch near the power On this section refer to miles. cord. Move the on/of
Resumen del contenido incluido en la página 13
Time/Incline/Segment Measure your heart rate, if desired. 6 Time display—When the manual mode or the Note: Before using the handgrip pulse sensor, iFIT.com mode is se- make sure that your hands are clean. lected, this display will show the elapsed time To measure your and the incline level of the treadmill. The display heart rate, stand will change from one number to the other every on the foot rails few seconds, as shown by the indicators in the and place your display. When a personal trainer
Resumen del contenido incluido en la página 14
speed setting for the HOW TO USE PERSONAL TRAINER PROGRAMS Current Segment first segment will be shown in the flashing Insert the key fully into the console. Current Segment col- 1 umn of the program dis- See HOW TO TURN ON THE POWER on page play. (The incline set- 12. tings are not shown in the program display.) The speed settings for the next four segments will Select one of the personal trainer programs. 2 be shown in the four columns to the right. When the key When only three seconds remain
Resumen del contenido incluido en la página 15
To stop the program temporarily, press the Stop HOW TO USE HEART RATE PROGRAMS button. The Time/Incline/Segment Time display will begin to flash. To restart the program, press the Start button or the Speed button. To end the program, press the Stop button, remove the key, CAUTION: If you have heart prob- and then reinsert the key. lems, or if you are over 60 years of age and have been inactive, do not use the heart rate Follow your progress with the displays. programs. If you are taking medic
Resumen del contenido incluido en la página 16
During heart rate pro- The speed and/or incline of the treadmill will then grams, the program change, if needed, to bring your heart rate closer to display will show a the target heart rate setting for the next segment. graphic that represents The program will continue until no time remains in your heart rate. Each the program. The walking belt will then slow to a time a heartbeat is de- stop. tected, an additional peak will appear. If the speed or incline setting for the current seg- ment is to
Resumen del contenido incluido en la página 17
HOW TO CONNECT YOUR PORTABLE STEREO HOW TO CONNECT THE TREADMILL TO YOUR CD PLAYER, VCR, OR COMPUTER Note: If your stereo has an RCA-type AUDIO OUT jack, see instruction A below. If your stereo has a 3.5mm LINE OUT jack, see instruction B. If your To use iFIT.com CD’s, the treadmill must be con- stereo has only a PHONES jack, see instruction C. nected to your portable CD player, portable stereo, home stereo, or computer with CD player. See pages A. Plug one end of the audio cable into the jack
Resumen del contenido incluido en la página 18
HOW TO CONNECT YOUR HOME STEREO HOW TO CONNECT YOUR COMPUTER Note: If your stereo has an unused LINE OUT jack, Note: If your computer has a 3.5mm LINE OUT jack, see instruction A below. If the LINE OUT jack is see instruction A. If your computer has only a being used, see instruction B. PHONES jack, see instruction B. A. Plug one end of the audio cable into the jack on the A. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the front of the tr
Resumen del contenido incluido en la página 19
HOW TO CONNECT YOUR VCR HOW TO USE IFIT.COM CD AND VIDEO PROGRAMS Note: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is being used, see instruction B. If you have a TV To use iFIT.com CD’s or videocassettes, the treadmill with a built-in VCR, see instruction B. If your VCR must be connected to your portable CD player, portable is connected to your home stereo, see HOW TO stereo, home stereo, computer with CD player, or CONNECT YOUR HOME STEREO on page
Resumen del contenido incluido en la página 20
If the speed or incline settings are too high or too • Adjust the volume of your CD player or VCR. low, you can manually override the settings at any If the volume is too high or too low, the con- time by pressing the Speed or Incline buttons on sole may not detect the program signals. the console. However, when the next “chirp” is • Make sure that the audio cable is properly heard, the speed and/or incline will change to connected, that it is fully plugged in, and that the next settings of the
