Resumen del contenido incluido en la página 1
Model No. IMTL49606.0
Serial No.
USER'S MANUAL
Serial Number
Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if parts are
damaged or missing, PLEASE
CONTACT OUR CUSTOMER
SERVICE DEPARTMENT
Visit our website at Visit our website at
DIRECTLY.
www.proform.com www.weslo.com
CALL TOLL-FREE:
new products, prizes, new products, prizes,
1-800-753-4645
fitness tips, and much more! fitness tips, and much more!
Mon.–Fri. 6 a.
Resumen del contenido incluido en la página 2
TABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 OPERA
Resumen del contenido incluido en la página 3
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill. 1. It is the responsibility of the owner to ensure page 12. To purchase a surge suppressor, see that all users of this treadmill are adequately your local IMAGE dealer or call the toll-free informed of all warnings and precautions. telephone number on the front cover of this manual and order part number 14
Resumen del contenido incluido en la página 4
20. Do not attempt to raise, lower, or move the 24.DANGER: Always unplug the power treadmill until it is properly assembled. (See cord immediately after use, before cleaning ASSEMBLY on page 6, and HOW TO FOLD the treadmill, and before performing the AND MOVE THE TREADMILL on page 20.) maintenance and adjustment procedures de- You must be able to safely lift 45 pounds (20 scribed in this manual. Never remove the kg) to raise, lower, or move the treadmill. motor hood unless instructed to do so by
Resumen del contenido incluido en la página 5
BEFORE YOU BEGIN ® Thank you for selecting the new IMAGE 17.5 S tread- number and serial number before calling. The model mill. The 17.5 S treadmill combines advanced technol- number of the treadmill is IMTL49606.0. The serial ogy with innovative design to help you get the most from number can be found on a decal attached to the tread- your exercise in the convenience of your home. And mill (see the front cover of this manual for the location). when you’re not exercising, the 17.5 S treadmill c
Resumen del contenido incluido en la página 6
1/2” Screw (119)–1 3/4” Tek Screw (58)–8 ASSEMBLY To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove the packing materials; do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, lubricant may be transferred to the top of the walking belt or to the
Resumen del contenido incluido en la página 7
2. Have a second person orient the Base (48) as 2 shown. Identify the Left Upright (31), which has a large hole near the bend as shown. Bend 31 Orient the Left Upright (31) as shown, and attach it to the Base (48) with two Upright Bolts (27) and 39 27 two Upright Star Washers (39); do not tighten the Upright Bolts yet. 48 Large Hole 39 27 3. Orient the Right Upright (36) as shown, and at- 3 tach it to the Base (48) with two Upright Bolts (27) and two Upright Star Washers (39); do not tighten t
Resumen del contenido incluido en la página 8
5. See the left inset drawing. Identify the two Frame 5 Spacers (34). Open the included packet of 36 grease, and apply grease to both sides of both Frame Spacers. Then, identify the outer side of 91 each Frame Spacer. 47 Next, hold a Frame Spacer (34) between the Right Upright (36) and the Lift Frame (59), with 34 the outer side of the Frame Spacer facing the Right Upright. Attach the Right Upright to the Lift Frame with a Frame Bolt (32), a Frame 33 Washer (33), and a Nut (47); do not tighten
Resumen del contenido incluido en la página 9
7. Set the console assembly face down on a soft 7 surface to avoid scratching it. Hold a Handrail (18) near the console assembly. Console Next, insert the console wire into the hole in the Wire bottom of the Handrail (18) and out of the indi- 22 18 cated square hole. If necessary, grip the con- 21 2 nector with needlenose pliers only in the area indicated by the arrow (see the inset drawing.) Then, attach the ground wire to the Handrail with Square a Silver Ground Screw (11). Hole Ground Wire N
Resumen del contenido incluido en la página 10
10. Lower the Uprights (31, 36). 10 Side View 32 See the inset drawing. Position the Uprights (31, 36) so that the treadmill Frame (74) is centered 27 between the Uprights. Firmly tighten the Upright Bolts (27) and the Frame Bolts (32) on each side of the treadmill. 31, 36 Do not overtighten the Frame Bolts. 74 View from Above 31 36 74 11. Raise the Uprights (31, 36). 11 Rotate the Left and Right Base Covers (90, 91) 180°. Slide the Base Covers over the Base (48). If necessary, pull out on t
Resumen del contenido incluido en la página 11
12. Attach the ground wire on the Upright Wire (28) 12 to the indicated hole in the Base (48) with a Grommet Silver Ground Screw (11). 28 36 Then, press the indicated grommet into the Right Upright (36). 2 Attach the Right Base Cover (91) to the Base (48) with two 3/4” Screws (2). Attach the Left 48 Base Cover (not shown) in the same way. Ground Raise the Uprights (31, 36) to a vertical position. Wire 11 2 91 13. Press the Latch Sleeve (30) into the Left Upright 13 (31). 31 89 Remove the knob
Resumen del contenido incluido en la página 12
OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT tric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding Your treadmill features a walking belt coated with high- plug. Plug the power cord into a surge suppressor, performance lubricant. IMPORTANT: Never apply sil- and plug the surge suppressor into an appropriate icone spray or other substances to the walking outlet that is properly installed and grounded in belt or the walking platform. Su
Resumen del contenido incluido en la página 13
CONSOLE DIAGRAM Note: If there are sheets of clear plastic Clip Key on the console, remove the plastic. FEATURES OF THE CONSOLE Calorie Goal Programs The console also features four calorie goal programs. The treadmill console offers a selection of features Each program controls the speed and incline of the designed to make your workouts more effective. When treadmill to help you burn unwanted pounds. the manual mode of the console is selected, the speed and incline of the treadmill can be chang
Resumen del contenido incluido en la página 14
To stop the walking belt, press the Stop button. HOW TO USE THE MANUAL MODE The time will begin to flash in the display. To restart the walking belt, press the Start button, the Insert the key into the console. Speed increase button, or one of the numbered 1 speed buttons. See HOW TO TURN ON THE POWER on page Note: The first time you use the treadmill, periodi- 13. cally inspect the alignment of the walking belt, and center it if necessary (see page 22). Enter your weight if desired. 2 Change
Resumen del contenido incluido en la página 15
Note: For the treadmill to count your steps accu- Turn on the fan if desired. 8 rately, correct walking form is important. As you walk, try to maintain a steady pace, a uniform To turn on the fan at low speed, press the Fan stride length, and a consistent position on the button; the word “Low” will appear in the display. treadmill. Lighter users may also find it helpful to To turn on the fan at high speed, press the button reduce the incline of the treadmill or to increase a second time; the wor
Resumen del contenido incluido en la página 16
Note: To change the speed of the walking belt or HOW TO USE A DISTANCE PROGRAM the incline of the treadmill at any time during the program, press the Speed or Incline buttons. Insert the key into the console. 1 The left side of the display will show the number See HOW TO TURN ON THE POWER on page of kilometers still to be run every few seconds. 13. To stop the program at any time, press the Stop Select a distance program. button. The time will begin to flash in the display. 2 To restart the pro
Resumen del contenido incluido en la página 17
Press the Start button or the Speed increase HOW TO USE A STEP PROGRAM 3 button to start the program. Insert the key into the console. A moment after the button is pressed, the walking 1 belt will begin to move at 2 mph. Hold the See HOW TO TURN ON THE POWER on page handrails and begin walking. 13. As you exercise, adjust the speed and incline of Select a step program. the treadmill as desired by pressing the Speed 2 and Incline buttons. To select a step pro- During the program, the upper disp
Resumen del contenido incluido en la página 18
When only three seconds remain in the first seg- HOW TO USE A CALORIE GOAL PROGRAM ment of the program, both the Current Segment column and the column to the right will flash and a Insert the key into the console. series of tones will sound. If the speed and/or in- 1 cline of the treadmill is about to change, the speed See HOW TO TURN ON THE POWER on page 13. setting and/or the incline setting will flash in the display to alert you. Enter your weight. 2 When the first segment is completed, all
Resumen del contenido incluido en la página 19
THE INFORMATION MODE Follow your progress with the display. 5 The console features an information mode that keeps See step 6 on pages 14 and 15. track of treadmill usage information. The information mode also allows you to select miles or kilometers as Measure your heart rate if desired. 6 the unit of measurement and to turn on and turn off the demo mode. See step 7 on page 15. To select the information mode, hold down the Stop Turn on the fan if desired. 7 button, insert the key into the consol
Resumen del contenido incluido en la página 20
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be per- manently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill. 1. Hold the metal frame firmly in the location shown by the arrow at the right. CAUTION: To decrease the possibility of injury, do not lift the frame by the pla
