Resumen del contenido incluido en la página 1
¨
Model No. IMHS40090
Serial No.
Write the serial number in the space
above for reference. The serial number
decal is on the frame behind the
access cover.
Serial Number Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or find that there
are missing or damaged parts,
we will guarantee complete satis-
faction through direct assistance
from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTO
Resumen del contenido incluido en la página 2
Table of Contents Posting the Warning Sign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Choosing a L
Resumen del contenido incluido en la página 3
Important Safety Instructions WARNING: To reduce the risk of drowning, electric shock, or serious injury, read the following important precautions before using the hydrotherapy spa. READ AND FOLLOW ALL INSTRUCTIONS 1. It is the responsibility of the owner to ensure 10. Never insert any object into any opening. that all users of the hydrotherapy spa are 11. Do not use breakable containers in or near adequately informed of all precautions. the hydrotherapy spa. 2. Use the hydrotherapy spa only as
Resumen del contenido incluido en la página 4
you should also keep the power cord away ¥ Always replace and lock the spa cover from lawn mowers, hedge trimmers, and when the hydrotherapy spa is not in use. other similar equipment. 29. WARNINGÑTo reduce the risk of injury: The 22. WARNINGÑThe power cord is equipped with water temperature should never exceed a Ground Fault Circuit Interrupter (GFCI), 104¡F. Temperatures between 100¡F and located at the end of the power cord. The 104¡F are considered to be safe for healthy GFCI must be tested
Resumen del contenido incluido en la página 5
rate and circulation. sure the water temperature with an accurate thermometer since the tolerance of water- 35. Do not use the hydrotherapy spa immediate- regulating devices varies. ly after strenuous exercise. 41. The causes, symptoms and effects of hyper- 36. If you feel pain or dizziness at any time while thermia may be described as follows: using the hydrotherapy spa, discontinue use Hyperthermia occurs when the internal tem- and contact a physician. perature of the body reaches a level of s
Resumen del contenido incluido en la página 6
Before You Begin Thank you for selecting the innovative RENEW 400 by For your benefit, read this manual carefully before ¨ IMAGE . The RENEW 400 hydrotherapy spa offers the using the RENEW 400. If you have additional ques- features and quality of a traditional hot tub at an tions, please call our Customer Service Department affordable price. Best of all, the RENEW 400 provides toll-free at 1-800-999-3756, Monday through Friday, 6 the benefit of hydrotherapy in the comfort and privacy a.m. until
Resumen del contenido incluido en la página 7
Choosing a Location for the Hydrotherapy Spa There are many factors to consider when choosing a location to set up the hydrotherapy spa. These factors vary depending on whether you use the hydrotherapy spa inside or outside. We have listed several factors you may wish to consider as you decide where you want to use the hydrotherapy spa. If you set up the hydrotherapy spa inside: If you set up the hydrotherapy spa outside: 1. The hydrotherapy spa will increase the level of 1. You should check yo
Resumen del contenido incluido en la página 8
Assembly Before beginning assembly, carefully read the ASSEMBLY REQUIRES THE FOLLOWING following information and instructions: TOOLS (not included): ¥ One (1) phillips screwdriver ¥ Place all parts in a cleared area and remove the packing materials from the spa shell. Do not dis- ¥ You may also need some soap or water pose of the packing materials until assembly is completed and the spa is in operation. A wire connector is provided on the pump motor of this unit to connect a minimum No. 8 ¥ D
Resumen del contenido incluido en la página 9
3. Wipe the spa shell clean with a damp cloth. Remove Fill to Here 3 the two warning decals (not shown) from the spa shell. Before filling the spa, make sure it is in the exact position you want. Also make sure the spa can be easily serviced, if needed. Once the spa is filled with water, it must be drained to be moved. Fill the spa by using a garden hose or other clean water source. Do not use soft water. The water temperature does not matter; however, if you use warm or hot water, the spa will
Resumen del contenido incluido en la página 10
Using the Hydrotherapy Spa The hydrotherapy spa is designed to seat four adults. TESTING AND TREATING THE WATER The eight jets provide a relaxing massage to sooth away stress, and the strength of the water massage The hydrotherapy spa comes with a starter chemical can be adjusted by the air control. The hydrotherapy pack for maintaining the water in the spa. Disregard spa holds 200 gallons of water and offers a heating the directions on the individual packages of ÒQUICK system (70¡F to 104¡F) an
Resumen del contenido incluido en la página 11
Spa Shell Diagram D B C A SPA OPERATION SECURING THE SPA COVER Refer to the diagram above. The function of each The spa cover can be component is explained below. secured by snapping Latch the latches on the spa The suction vents (A) located near the floor of the cover into the buckles spa bring the water into the pump in order to operate on the side panels. the system. The suction covers should always be in Key place over the suction vents. Never operate the spa The buckles can be without the
Resumen del contenido incluido en la página 12
Console Diagram Air Control Thermostat On/Off Button USING THE CONSOLE The spa also features an automatic mode which heats and filters the water when the spa is left unattended. Refer to the console diagram above. The function of When the spa is first plugged in, or if the buttons on each console control is explained below: the console have not been used for longer than twen- ty minutes, the automatic mode will begin filtering or Air Control: Determines the amount of air that is in heating the w
Resumen del contenido incluido en la página 13
Maintenance The hydrotherapy spa is designed to provide you with MAINTAINING THE SPA COVER years of enjoyment. Please follow the guidelines below to properly maintain your hydrotherapy spa. The spa cover should be cleaned monthly. To clean the spa cover, use water and a non-abrasive cleaner MAINTENANCE SCHEDULE on the entire cover. Rinse the cover with a garden hose to remove any cleaner residue. Dry the cover DAILY entirely. You should also use a non-silicone based ¥ Check the water level and r
Resumen del contenido incluido en la página 14
6. Re-insert the cleaned filter into the filter housing. ATTACHING AND REMOVING THE ACCESS 7. Re-attach the filter cover with the screws. Do not COVER overtighten the screws. To remove the access cover, remove the four access WATER CHEMISTRY cover screws from the access cover. Slide the access cover down and pull the bottom of the access cover The hydrotherapy spa comes with a starter chemical away from the spa unit. Be careful not to damage pack for maintaining the water in the spa. (See TEST-
Resumen del contenido incluido en la página 15
spa unit. ACCESS COVER on page 14). Locate the pump 4. Remove the drainage hose from the spa and inside the spa unit. Remove the drain plug from the attach a garden hose to the valve on the drainage pump and allow all water to drain from the pump. hose. Replace the drain plug. 5. Open the valve by turning the knob counterclock- wise. The water will begin to drain. WINTER USE AND CARE 6. When the spa is empty, close the valve and remove the garden hose. Return the drainage The hydrotherapy spa is
Resumen del contenido incluido en la página 16
Maintenance Notes Maintenance is an important part of keeping your spa in top operating condition. Use the space below to make any special notes you may want to remember for future reference, or to keep a maintenance log. 16
Resumen del contenido incluido en la página 17
Trouble-shooting Most problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time. 1. SYMPTOM: THE SPA WILL NOT OPERATE tained at 70¡F, it will take approximately 24 to 36 hours for the water to reach the set temper- a. Check to see if the GFCI breaker is tripped, or ature. was not
Resumen del contenido incluido en la página 18
10. SYMPTOM: THE SPA JET UNIT CONTINUES they will begin running the filter cycle. At any TO RUN AFTER IT HAS BEEN SHUT OFF time after the spa jets have been shut off, the pump will begin cycling the water if the temper- a. To turn the spa jets on high, press the ON/OFF ature falls below the minimum setting. Note: If button once. To turn the spa jets on low, press the water temperature is already below the the ON/OFF button twice. To turn the spa jets minimum setting, the pump will not shut off.
Resumen del contenido incluido en la página 19
R0299A Exploded DrawingÑModel No. IMHS40090 11 23 1 6 12 24 21 35 36 5 24 6 36 14 12 5 29 47 20 46 4 35 36 28 27 50 33 15 48 32 40 7 8 7 33 39 2 16 37 7 9 45 10 13 25 26 22 19 34 43 49 18 18 17 41 38 3 42 13 44 31 30 19
Resumen del contenido incluido en la página 20
Ordering Replacement Parts To order replacement parts, simply call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be pre- pared to give the following information when calling: 1. The MODEL NUMBER of the product (IMHS40090). ¨ 2. The NAME of the product (RENEW 400 by IMAGE ). 3. The SERIAL NUMBER of the product (see the front cover of this manual). 4. The KEY NUMBER and D
