Resumen del contenido incluido en la página 1
INSTALLATION GUIDE FOR
GREEN TEA™ 5' x 36" MODEL 3571
GREEN TEA™ 5-1/2' x 36" MODEL 3572
GREEN TEA™ 6' x 36" MODEL 3573
GREEN TEA™ 5' x 42" MODEL 3574
GREEN TEA™ 6' x 42" MODEL 3575
®
TOWN SQUARE 5' x 42" MODEL 2748
®
TOWN SQUARE 6' x 42" MODEL 2742
ELLISSE OVAL MODEL 2709
COMBINATION WHIRLPOOL AND
AIR BATH SYSTEMS WITH
CHROMATHERAPY LIGHTS
THANK YOU...
for selecting an American Standard bath. Your new bath is shipped to you after careful inspection. The Air
Massa
Resumen del contenido incluido en la página 2
TABLE OF CONTENTS: Cover................................................................................................Page 1 Table of Contents..............................................................................Page 2 Safety Instructions Notice.................................................................Page 3 Roughing-in Reference.....................................................................Page 4 - 12 Installation and Framing Instructions..................................
Resumen del contenido incluido en la página 3
IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS! ! WARNING: Risk of personal injury. Do not permit children to use this bathtub without adult supervision. ! WARNING: Risk of electric shock. Do not permit electrical appliances near any bathtub when bathtub contains water. WARNING: Risk of hyperthermia and possible drowning. People using medications and/or having adverse medical ! history should consult a physician before using this product. ! WARNING: Risk of personal injury. Do n
Resumen del contenido incluido en la página 4
ROUGHING-IN REFERENCES GREEN TEA™ 5' x 36" MODEL 3571 COMBINATION SYSTEM 60 TOP VIEW (1524mm) 14-3/4 (375mm) OUTLINE OF CUTOUT 58.5 x 34.5 (1486 x 876mm) 11-1/2 (292mm) 36 ACCESS AIR BLOWER, (914mm) PUMP MOTOR, WHIRLPOOL HEATER AND LIGHTING SYSTEM AT THIS END OF TUB 9 C L (229mm) CUTOUT IN FLOOR FOR DRAIN CONTROL PANELS 20 AIR JETS 8 WHIRLPOOL JETS C L TO OVERFLOW LEVELING STRINGER NOT 51mm 102mm (4") FOR SUPPORT END VIEW (2") 559mm INTEGRAL FEET (22") WITH ATTACHED BASEBOARD 508mm (2
Resumen del contenido incluido en la página 5
ROUGHING-IN REFERENCES GREEN TEA™ 5-1/2' x 36" MODEL 3572 COMBINATION SYSTEM 66 TOP VIEW (1676mm) 14-3/4 (292mm) 11-1/2 OUTLINE OF CUTOUT 64.5 x 34.5 (1638 x 876mm) (292mm) ACCESS AIR BLOWER, 36 PUMP MOTOR, (914mm) WHIRLPOOL HEATER AND LIGHTING SYSTEM AT THIS END OF TUB 9 C L (229mm) CUTOUT IN FLOOR FOR DRAIN 8 WHIRLPOOL CONTROL 22 AIR JETS JETS PANELS C L TO OVERFLOW LEVELING STRINGER NOT 51mm 102mm (4") FOR SUPPORT (2") END VIEW 559mm INTEGRAL FEET (22") WITH ATTACHED BASEBOARD 508m
Resumen del contenido incluido en la página 6
ROUGHING-IN REFERENCES GREEN TEA™ 6' x 36" MODEL 3573 COMBINATION SYSTEM TOP VIEW 72 (1829mm) 14-3/4 (375mm) 11-1/2 OUTLINE OF CUTOUT 70.5 x 34.5 (1780 x 876mm) (292mm) ACCESS AIR BLOWER, 36 PUMP MOTOR, (914mm) WHIRLPOOL HEATER AND LIGHTING SYSTEM AT THIS END OF TUB 9 C L (229mm) CUTOUT IN FLOOR FOR DRAIN CONTROL 10 WHIRLPOOL 23 AIR JETS PANELS JETS C TO OVERFLOW L LEVELING STRINGER NOT 51mm 102mm (4") FOR SUPPORT (2") END VIEW 559mm INTEGRAL FEET (22") WITH ATTACHED BASEBOARD 508mm (
Resumen del contenido incluido en la página 7
ROUGHING-IN REFERENCES GREEN TEA™ 5' x 42" MODEL 3574 COMBINATION SYSTEM 60 TOP VIEW (1524mm) 14-3/4 (375mm) 11-1/2 OUTLINE OF CUTOUT 58.5 x 40.5 (1486 x 1029mm) (292mm) 42 (1067mm) ACCESS AIR BLOWER, PUMP MOTOR, WHIRLPOOL HEATER AND LIGHTING SYSTEM AT THIS END OF TUB 9 C L (229mm) CUTOUT IN FLOOR FOR DRAIN 8 WHIRLPOOL CONTROL 23 AIR JETS JETS PANELS C TO OVERFLOW L LEVELING STRINGER NOT 51mm 102mm (4") FOR SUPPORT (2") END VIEW 559mm INTEGRAL FEET (22") WITH ATTACHED BASEBOARD 508mm (
Resumen del contenido incluido en la página 8
ROUGHING-IN REFERENCES GREEN TEA™ 6' x 42" MODEL 3575 COMBINATION SYSTEM TOP VIEW 72 (1829mm) 14-3/4 (375mm) 11-1/2 OUTLINE OF CUTOUT 70.5 x 40.5 (1780 x 1029mm) (292mm) 42 ACCESS AIR BLOWER, (1067mm) PUMP MOTOR, WHIRLPOOL HEATER AND LIGHTING SYSTEM AT THIS END OF TUB 9 C L (229mm) CUTOUT IN FLOOR FOR DRAIN CONTROL PANELS 10 WHIRLPOOL 27 AIR JETS JETS C TO OVERFLOW L LEVELING STRINGER NOT 51mm 102mm (4") FOR SUPPORT (2") END VIEW 559mm INTEGRAL FEET (22") WITH ATTACHED BASEBOARD 508mm
Resumen del contenido incluido en la página 9
ROUGHING-IN REFERENCES ® TOWN SQUARE 5' x 42" MODEL 2748 COMBINATION SYSTEM CONTROL PANELS TOP VIEW 59-1/2" (1511mm) INTEGRAL FITTING DECK 29-3/4" 2-1/2" X 14" (755mm) (64 X 356mm) 14-1/2" (368mm) 3" (76mm) 7-3/4" TYPICAL (197mm) FLOOR CUTOUT 41-5/8" 9" X 18" (1057mm) (229 X 458mm) OUTLINE OF CUTOUT 58" X 40-1/8" (1473 X 1019mm) 20 AIR JETS 3/4" (19mm) OUTLINE OF ACCESS AIR BLOWER, 6 WHIRLPOOL SKID RESISTANT JETS PUMP MOTOR, SURFACE WHIRLPOOL HEATER AND LIGHTING SYSTEM LEVELING STRING
Resumen del contenido incluido en la página 10
ROUGHING-IN REFERENCES ® TOWN SQUARE 6' x 42" MODEL 2742 COMBINATION SYSTEM CONTROL TOP VIEW PANELS 71-1/2" (1816mm) INTEGRAL 35-3/4" FITTING DECK 13-1/4" (908mm) 2-1/4" X 14" (337mm) (57 X 356mm) 3" (76mm) EDGE OF FLOOR 10-1/4” CUTOUT 26-3/4 (260mm) (679mm) FLOOR CUTOUT 8 WHIRLPOOL 9" X 19" JETS (229 X 459mm) AIR 7-3/4” TYPICAL BLOWER (197mm) 3/4" (19mm) 41-3/4" (1060mm) ACCESS AIR BLOWER, PUMP OUTLINE OF SKID 20 AIR MOTOR, WHIRLPOOL HEATER RESISTANT SURFACE JETS AND LIGHTING SYSTEM AT
Resumen del contenido incluido en la página 11
ROUGHING-IN REFERENCES ELLISSE OVAL MODEL 2709 COMBINATION SYSTEM TOP VIEW 1759 mm (69-1/4") OUTLINE OF CUTOUT ACCESS AIR BLOWER, PUMP MOTOR, 240 mm WHIRLPOOL HEATER AND LIGHTING (9-7/16") SYSTEM AT THIS END OF TUB 978 mm 7-3/4" TYPICAL (38-1/2") (197mm) FLOOR CUTOUT 229 X 459mm (9" X 19") 489mm (19-1/4") CONTROL 6 WHIRLPOOL 16 AIR JETS JETS PANELS C LTO OVERFLOW 38mm 86mm (3-3/8") (1-1/2") END VIEW INTEGRAL FEET WITH ATTACHED 533mm BASEBOARD (21") 495mm (19-1/2") ROUGH FLOOR NOTE: I
Resumen del contenido incluido en la página 12
ROUGHING-IN REFERENCES GREEN TEA™ 5' x 36" GREEN TEA™ 5-1/2' x 36" MODEL 3571 COMBINATION SYSTEM MODEL 3572 COMBINATION SYSTEM GENERAL SPECIFICATIONS FOR 3571 GENERAL SPECIFICATIONS FOR 3572 COMBINATION SYSTEM COMBINATION SYSTEM INSTALLED SIZE 60 x 36 x 22 In. (1524 x 914 x 559mm) INSTALLED SIZE 66 x 36 x 22 In. (1676 x 914 x 559mm) WEIGHT 117 Lbs. (53 Kg.) WEIGHT 128 Lbs. (58 Kg.) WEIGHT w/WATER 550 Lbs. (250 Kg.) WEIGHT w/WATER 619 Lbs. (281 Kg.) GAL. TO OVERFLOW 52 Gal. (197 L.) GAL. TO
Resumen del contenido incluido en la página 13
FIGURE 1 INSTALLATION AND FRAMING INSTRUCTIONS: TYPICAL The variety of installations possible for this combination system may require framing procedures INSTALLATION other than those shown. Locate studs as required. Ensure roughing-in dimensions are proper, plumb and square. Provisions must be made in all installations for an access opening for servicing the air blower and controls. It is strongly recommended that an additional opening be provided for access to the drain components. The apr
Resumen del contenido incluido en la página 14
ELECTRICAL INSTALLATION INSTRUCTIONS All wiring must be performed by a licensed electrician in accordance with the national electrical code and all other applicable codes. WARNING: When using electrical products, basic precautions should always be observed, including the following: ! 1. DANGER: RISK OF ELECTRIC SHOCK! Connect only to a circuit protected by a ground-fault circuit interrupter. 2. Grounding is required. The unit should be installed by a licensed electrician and grounded. 3. Pe
Resumen del contenido incluido en la página 15
WHIRLPOOL HEATER ELECTRICAL INSTALLATION INSTRUCTIONS (continued) (HEATER) Ensure the heater and pump are properly GROUNDED and BONDED as required. Attach the 8 AWG solid HEATER ON copper conductor supplied with the heater from the heater bonding lug to the motor frame bonding lug as shown in Figure 3. (PUMP/MOTOR) The conductor is secured to the lugs using set screws. The motor frame shall have a second 8 AWG solid copper conductor connected from the frame bonding RUN 8 AWG SOLID COPPE
Resumen del contenido incluido en la página 16
UNDER DECK MOUNTING INSTRUCTIONS Please note that care must be taken to protect the surface of the tub during all aspects of the installation. Do not drill or cut the bath deck with the tub directly beneath it as damage to the tub may result. 1. Install the tub per the installation instructions provided with the unit. 2. Prepare the bath deck support structure per the local codes. Note - the bath deck must be self supporting. 3. Cut bath deck to your specifications. 4. Place the bath dec
Resumen del contenido incluido en la página 17
754323-100 Rev A 17
Resumen del contenido incluido en la página 18
754323-100 Rev A 18
Resumen del contenido incluido en la página 19
754323-100 Rev A 19
Resumen del contenido incluido en la página 20
754323-100 Rev A 20
