Resumen del contenido incluido en la página 1
Operating Instructions
Single Conveying Hopper Loader
SSE-2
Sterling Material Processing
Resumen del contenido incluido en la página 2
SSE 2 Sterling Material Processing 5200 West Clinton Ave. Milwaukee, WI 53223 Telephone: (414) 354-0970 Fax: (414) 354-6421 www.sterlco.com Technical service: Service department Telephone: (800) 423-3183 Edition: 02/04 Bulletin #: SM4-615.2 These operating instructions are for*: (* please fill in personally) Serial number: Year of manufature: Date of Delivery: Number of delivery: Date of commissioning: Location: Group of machines: ii
Resumen del contenido incluido en la página 3
SSE 2 Sterling Material Processing retains all rights to change the information in these operating instructions at any time without notice. We assume no liability for any errors or direct or indirect damage resulting in context with these operating instructions. Copying, translation or publication in any form except for personal use of purchaser requires approval from Sterling Material Processing. All rights reserved. iii
Resumen del contenido incluido en la página 4
SSE 2 iv
Resumen del contenido incluido en la página 5
Please note that our address and phone information has changed. Please reference this page for updated contact information. These manuals are obsolete and are provided only for their technical information, data and capacities. Portions of these manuals detailing procedures or precautions in the operation, inspection, maintenance and repair of the products may be inadequate, inaccurate, and/or incomplete and shouldn’t be relied upon. Please contact the ACS Group for more current information
Resumen del contenido incluido en la página 6
SSE 2 Table of Contents 1. General instructions.........................................................................................................1-1 1.1. Warnings and symbols ......................................................................................................................... 1-2 1.2. Explanations and information .............................................................................................................. 1-3 1.3. Legal basis ..........................
Resumen del contenido incluido en la página 7
SSE 2 8. Maintenance.....................................................................................................................8-1 8.1. Maintenance intervals........................................................................................................................... 8-3 8.2. Servicing the Loader............................................................................................................................. 8-4 8.2.1. Changing the sealing ring of the outlet fla
Resumen del contenido incluido en la página 8
SSE 2 1. General instructions M These instructions apply to all persons within the range of action of the equipment. These operating instructions are to be used by all persons assigned activities connected with the equipment. General instructions 1-1
Resumen del contenido incluido en la página 9
SSE 2 1.1. Warnings and symbols The following warnings and symbols are used in these operating instructions: M This symbol indicates danger to life. Fatal or serious injury is possible if the corresponding instructions, regulations or warnings are not observed. L This symbol indicates that serious injury is possible if the corresponding instructions, regulations or warnings are not observed. F This symbol indicates that extensive damage to equipment is possible if the corresponding instructions
Resumen del contenido incluido en la página 10
SSE 2 1.2. Explanations and information Various terms are used in these operating instructions to ensure clarity. Therefore please note that the terms used in the text stand for the corresponding explanations listed below. • Equipment: ”Equipment” can mean an individual unit, a machine or an installation. • Operating personnel: The ”operating personnel” are persons operating the equipment on their own responsibility or according to instructions. • Operator: The ”operator” of the equipment (prod
Resumen del contenido incluido en la página 11
Resumen del contenido incluido en la página 12
SSE 2 2. Safety instructions M These safety instructions apply to all persons within the range of action of the equipment, and should be used by all persons assigned activities connected with the equipment. Please inform all persons within the range of action of the equipment of the direct and indirect hazards connected with the equipment. Knowledge of the English language is prerequisite. Ensure that all operating personnel are familiar with the operating instructions and the function of the eq
Resumen del contenido incluido en la página 13
SSE 2 2.1. For your safety 2.1.1. General To prevent injury and/or damage to equipment, observe the following safety rules: • Read these operating instructions carefully before operating for the first time. Contact us should questions arise. • These operating instructions must be kept available at all times at the place of operation of the equipment. • Please note that, for reasons of clarity, not all conceivable cases regarding operation or maintenance of the equipment can be covered in these
Resumen del contenido incluido en la página 14
SSE 2 2.1.2. Assembly To prevent injury and/or damage to equipment, observe the following safety rules: • Compare the connected loads with those of the main supply. • Use care when using lifting gear, and observe any pertaining regulations. • Do not modify, add other equipment or change the design of the equipment without the approval of the manufacturer. • Attachments not supplied by Sterling must be manufactured in accordance with safety regulation EN 294. • Make sure all the accessories and c
Resumen del contenido incluido en la página 15
SSE 2 2.1.3. Operation To prevent injury and/or damage to equipment, observe the following safety rules: • Appoint an equipment foreman to be responsible for the equipment. • Ensure that the operating personnel are provided detailed instruction in the operation of the equipment. • When the main switch is switched off for reasons pertaining to safety, it must be secured against unauthorized activation. • Repair work may be carried out by trained personnel only. • Never operate the equipment when
Resumen del contenido incluido en la página 16
SSE 2 2.2. For the operating safety of the equipment Never change settings if the consequences are not precisely known. Use only original Sterling spare parts. Please observe the maintenance schedule. Keep record of all maintenance and repair work. Please note that electronic components may be damaged by static discharge. Check all electrical connections for proper fit before the equipment operated for the first time and at regular intervals. The operating temperature range is 32 to +113 °F (0
Resumen del contenido incluido en la página 17
Resumen del contenido incluido en la página 18
SSE 2 3. Transport, Assembly and Storage M This chapter is intended for all operating personnel of the equipment. Personnel using these instructions must be instructed in the regulations for the prevention of accidents, the operating conditions and safety regulations and their implementation. Ensure in each case that the operating personnel are sufficiently informed. Please inform all persons within the range of action of the equipment of the direct and indirect hazards connected with the equipm
Resumen del contenido incluido en la página 19
SSE 2 3.1. Transport and Packing M Please ensure adequate carrying capacity of the lifting equipment. The equipment passes rigorous testing in the factory and is packed carefully to avoid transport damage. Please check packing on delivery for transport damage. The inlet and discharge flanges are sealed with plugs, so that no dirt can enter during transport. Plugs must be removed before assembly. Packing materials should be disposed of according to environmental laws or reused. Only use for tran
Resumen del contenido incluido en la página 20
SSE 2 4. Assembly instructions M These installation instructions are intended for persons with skills in electrical and mechanical areas due to their training, experience and received instructions. Personnel using these installation instructions must be instructed in the regulations for the prevention of accidents, the operating conditions and safety regulations and their implementation. Ensure in each case that the personnel are sufficiently knowledgeable about the equipment. The installation i
