Manual de instrucciones de Garmin GTX 327

Resumen del contenido incluido en la página 1

™
GTX 327
Mode A/C Transponder
pilot’s guide

Resumen del contenido incluido en la página 2

© Copyright 1999 - 2008 GARMIN Ltd. or its subsidiaries All Rights Reserved Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of GARMIN. GARMIN hereby grants permission to download a single copy of this manual and of any revision to this manual onto a hard drive or other electronic storage medium to be viewed and to print one c

Resumen del contenido incluido en la página 3

Limited Warranty This GARMIN product is warranted to be free from defects in materials or workmanship for one year from the date of purchase. Within this period, GARMIN will at its sole option, repair or replace any components that fail in normal use. Such repairs or replacement will be made at no charge to the customer for parts or labor, provided that the customer shall be responsible for any transportation cost. This warranty does not cover failures due to abuse, misuse, accident or u

Resumen del contenido incluido en la página 4

The GTX 327 transponder is powered on by pressing the STBY, ALT, or ON keys, or by a remote avionics master switch (if applicable). After power on, a start-up page is displayed while the unit performs a self test. If the unit detects an internal failure, the screen displays SELF TEST FAILED. Mode Selection Keys OFF  Powers off the GTX 327. Pressing STBY, ON, or ALT key powers on the transponder displaying the last active identification code. STBY  Selects the standby mode. When in st

Resumen del contenido incluido en la página 5

Keys for Other GTX 327 Functions IDENT  Pressing the IDENT key activates the Special Position Identification (SPI) Pulse for 18 seconds, identifying your transponder return from others on the air traffic controller’s screen. The word IDENT will appear in the upper left corner of the display during this time. VFR  Sets the transponder code to the pre-programmed VFR code selected during installation configuration (this is set to 1200 at the factory). Pressing the VFR key again restores th

Resumen del contenido incluido en la página 6

Function Display NOTE: Transponder options are normally set at time of installation. For changes to the GTX 327 parameters, contact your Garmin authorized service center. PRESSURE ALT: Displays the altitude data supplied to the GTX 327 in feet, hundreds of feet (i.e., flight level), or meters, dependent upon installation configuration. FLIGHT TIME: Displays the Flight Time, configured during installation as MANUAL, CLEAR, or ACCUMULATE (see Timer Operation for details). Timer is contro

Resumen del contenido incluido en la página 7

Timer Operation To operate the Flight Timer: 1. Press the FUNC key until FLIGHT TIME is displayed. 2. If the GTX 327 Flight Timer is configured as ACCUMULATE or CLEAR, the timer will begin automatically when the unit senses that the aircraft has become airborne. The timer may be reset to zero at every liftoff (CLEAR), continue accumulating time at liftoff (ACCUMULATE), or may be controlled manually (MANUAL). 3. If desired, press START/STOP to pause or restart the timer. 4. Press CLR to reset

Resumen del contenido incluido en la página 8

© 1999 - 2008 Garmin Ltd. or its subsidiaries Garmin International, Inc. st 1200 East 151 Street, Olathe, Kansas 66062, U.S.A. Garmin (Europe) Ltd. Liberty House, Bulls Copse Road, Hounsdown Business Park, Southampton, SO40 9RB, U.K. Garmin Corporation nd No. 68, Jangshu 2 Road, Shijr, Taipei County, Taiwan www.garmin.com Part Number 190-00187-00 Rev. D