Manual de instrucciones de Harbor Freight Tools 94076

Resumen del contenido incluido en la página 1

ROTARY TOOL SET
WITH 30 ACCESSORIES
MODEL 94076
ASSEMBLY AND OPERATING
INSTRUCTIONS
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
© ®
Copyright 2005 by Harbor Freight Tools . All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or
form without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353.

Resumen del contenido incluido en la página 2

Specifications T) ool Speed 16,250 RPM (no load Pz ower Supply Input:120 VAC, 60 H Output: 12 VDC, 500 mA ® UL Listed Power Adapter C” ollet Sizes 1/8”, 3/32”, 3/64 S5 pindle Thread M8 x .7 Accessories listed on page 8 on the accessory list. Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions, operating and mainte- nance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the fron

Resumen del contenido incluido en la página 3

13. Stay alert. Watch what you are doing, use common sense. Do not operate any tool when you are tired. 14. Take caution as some woods contain preservatives such as copper chromium arsenate (CCA) which can be toxic. When cutting these materials extra care should be taken to avoid inhalation and minimize skin contact. 15. Check for damaged parts. Before using any tool, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended f

Resumen del contenido incluido en la página 4

6. If the bit or accessory bogs down or becomes jammed, make sure to turn off the switch and unplug from the power source before clearing the bit or accessory. 7. Always feed the accessory or bit in the proper direction. Feed in the direction that the cutting edge is exiting the workpiece (that is the same direction chips are thrown). 8. Always bring the tool up to speed before contacting the material. 9. Make sure there are no foreign objects, such as nails, in your workpiece. 10. Don’t use du

Resumen del contenido incluido en la página 5

6. Sanding accessories can be used on a variety of workpieces, ranging from models to fine furniture. 7. Polishing accessories bring metal surfaces to a smooth finish. Parts List Pn artD. escriptio Qty Maintenance Note: Always disconnect the power adapter from the electrical outlet before attempting any maintenance. 1. While wearing safety goggles and a full face shield, use compressed air to clean out the tool’s vents. 2. Clean the collet shaft of any dirt or debris. 3. Wipe the tool down with

Resumen del contenido incluido en la página 6

Assembly Diagram SKU 94076 For technical questions, please call 1-800-444-3353. Page 6

Resumen del contenido incluido en la página 7

Accessory List Pn art Descriptio Al Rotary Too B(7) Brass Collet Set 1 C( Diamond Burr Set / ” Shank) 8 3 D( Mounted Stone Set / ” Shank) 32 1 E( Sanding Drum Set / ” Shank) 8 1 F( Cut Off Wheel Set / ” Shank) 8 1 G( Buffing Wheel Set / ” Shank) 8 3 1 H( Wire Wheel Set / ” & / ” Shanks) 32 8 Ie Grinding Ston 3 1 J( Drill Bit Set / ", / " dia.) 64 8 3 K( Carbide Burr / ” Shank) 32 Le Cas M(13) AC Adapter Accessory Illustration Note: To use the cutoff wheels and polishing wheels, see Accessor

Resumen del contenido incluido en la página 8

WARRANTY LIMITED 90 DAY/1 YEAR WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser for a period of ninety days from date of purchase that the motor, the belts (if so equipped), and the blades (if so equipped) are free of defects in materials and workmanship. Harbor Freight Tools also warrants to the original purchaser, for a period of one year from date of purchase, that all other