Resumen del contenido incluido en la página 1
INSTRUCTION MANUAL
1200W
125MM (5”)
ANGLE GRINDER
AG125MAG
INSTRUCTION MANUAL
050922 ED4 JJ
1
Resumen del contenido incluido en la página 2
Contents Warranty 2 Full 3 Years Light Trade Warranty Whilst every effort is made to ensure your complete Introduction 3 satisfaction with this tool, occasionally, due to the mass Environmental protection 3 manufacturing techniques, a tool may not live up to our required level of performance and you may need the Description of symbols 3 assistance of our service department. Specifications 3 This product is warranted for a 3-year period for light trade use from the date of the original purch
Resumen del contenido incluido en la página 3
Dear Customer Description of symbols The rating plate on your tool may show symbols. These If you require any help with your product, whether it � represent important information about the product or instructions is a Warranty claim, spare part or user information, please on its use. phone our Help Line for an immediate response. Phone � 1300 880 001 in Australia or 0800 445 721 in New Zealand. Wear hearing protection. Wear eye protection. Introduction Wear breathing protection. Your new GM
Resumen del contenido incluido en la página 4
Personal safety Safety instructions WARNING. Read and understand all instructions. Failure to • Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while warnings below refers to your mains-operated (co
Resumen del contenido incluido en la página 5
• Do not use the power tool if the switch does not turn it Additional safety rules for angle grinders on and off. Any power tool that cannot be controlled with the • F ully unwind cable drum extensions to avoid potential switch is dangerous and must be repaired. overheating. • Disconnect the plug from the power source before • When an extension cable is required, you must ensure that it making any adjustments, changing accessories, or has the right ampere rating for your power tool an
Resumen del contenido incluido en la página 6
• Always use the front handle and ensure a good grip on the Contents of carton grinder housing with one hand and the handle with the other The GMC AG125MAG Angle Grinder is supplied with the hand before proceeding with any work. following accessories as standard: • M ake sure that the disc is not in contact with the work when • Pin wrench you start the grinder. • Side handle • B e careful not to damage the spindle or either of the disc • 125mm metal cutting disc flanges. Damage to these
Resumen del contenido incluido en la página 7
Know your product Before using the angle grinder, familiarise yourself with all the operating features and safety requirements. Use the tool and accessories only for the applications intended. All other applications are expressly ruled out. 2 7 13 1. On/off switch 6 8 2. Power lock-on button 3. Spindle lock button 4. Disc guard 5. Front handle 3 6. Mounting points for 1 the handle 7. LED Overload protection system 8. Motor housing 14 9. Pin wrench 10. Outer flange 11. Disc 12. Inner flange
Resumen del contenido incluido en la página 8
Setting up Operation Multi-position front handle This angle grinder can be used for grinding and cutting steel, stone or ceramic workpieces such as pipe, box section, Screw the front handle (5) into the rectangular, angle iron steel bar, most suitable mounting port (6) house bricks and tiles. Do not (left side or right side) to suit the attempt to grind wood or a soft application. Ensure that the handle metal such as lead. The material is fully screwed in place and firm. will quickly
Resumen del contenido incluido en la página 9
5. Once the grinding or cutting 2. Use your finger or thumb to turn is finished, pull in and release the dial forwards to increase the on/off switch (1) to stop the the speed and backwards to grinder. decrease it. WARNING. Avoid flying sparks 3. Position “1” denotes the lowest 30º and ensure they do not hit any speed. Position “6” denotes the inflammable materials, as they are highest speed. 15º very hot and could cause personal NOTE. Using the correct speed for injury or a fire. the jo
Resumen del contenido incluido en la página 10
WARNING. Do not use a disc marked with a lower RPM than CAUTION. Do not use excessive force to clamp the disc. It could that of the Max no load speed shown on the rating plate. crack it and cause failure during use. 3. Clean the flanges and check the new disc. WARNING. Do not immerse the disc into any type of lubricant including water. This angle grinder is designed as a dry grinder/ 4. Holding the angle grinder with the spindle facing upwards, cutter. Failure to observe this warning could re
Resumen del contenido incluido en la página 11
11
Resumen del contenido incluido en la página 12
Carefully read the entire Instruction Manual before using this product. Before returning this product for a Warranty Claim or any other reason Please Call 1300 880 001 (Australia) or 0800 445 721 (New Zealand) When you make your call, please have the following information at hand: GMC Product Type GMC Product Code A GMC Service Engineer will take your call and, in most cases, will be able to solve your problem over the phone. You are welcome to use this phone-in service to make sugg
