Manual de instrucciones de Cannon 1904030

Resumen del contenido incluido en la página 1

PEDESTAL MOUNTS
4” Fixed Pedestal mount 1904030
6” Fixed Pedestal mount 1904031
4” Swivel Pedestal mount 1904032
6” Swivel Pedestal mount 1904033
CAUTION:
READ THIS MANUAL CAREFULLY
BEFORE OPERATING YOUR
NEW CANNON ACCESSORY.
RETAIN FOR FUTURE REFERENCE.
NOTE: Do not return your CANNON accessory to your
retailer. Your retailer is not authorized to repair or re-
place this unit. You may obtain service by:

• calling CANNON at 1-800-227-6433;

• returning your accessory to the Facto

Resumen del contenido incluido en la página 2

Pedestal Mount Models & Features 1904030 Fixed Base Downrigger Pedestal 4” 1904031 Fixed Base Downrigger Pedestal 6” Cannon’s fixed base downrigger pedestals can be surface mounted or track mounted for a variety of mounting positions and easy removal. The 3/4” thick aluminum top plate is pre-drilled and tapped for mounting Can- non downriggers as well as most Scotty®, Big Jon®, Penn®, Vector, Proos, Fishlander and Walker downriggers. Components are made from clear anodized aluminum and

Resumen del contenido incluido en la página 3

How to use the Swivel Pedestal Cannon’s swivel base downrigger pedestals allow you to rotate the mounting plate for optimal positioning. To rotate the mounting plate, disengage the lock pin by pulling the lock pin handle down. Turn the plate to the de- sired angle and release the spring loaded lock pin making sure that it reengages. Check to make sure the swivel is in a fixed position. Swivel Base Break Away Reset The Cannon Swivel bases feature a unique break away system whi

Resumen del contenido incluido en la página 4

Mounting the Pedestal to Your Boat Mounting Directly to Deck or Gunnel Carefully choose an ideal position where you may best utilize your pedestal mount. Use the base of the pedestal as a template to mark hole locations and drill four 9/32" diameter through holes. Fix the pedestal to the deck or gunnel using four 1/4”-20 flat head screws with four flat washers, lock washers, and nuts (not included). To determine the length of screw needed, measure the thickness of deck that you are

Resumen del contenido incluido en la página 5

Mounting Your Downrigger to the Pedestal Mount The Cannon Pedestal Mount provides 1/4”-20 tapped mounting holes for attaching most downrigger mounting bases. To attach a mounting base you will need four 1/4”-20 screws (not included). To determine the length of screws needed, measure the thickness of the downrigger mounting base and add 1/2”. See below for screw lengths for the Cannon Downrigger mounting bases. Magnum / Digi-Troll Tall Mounting Base — 2” Long Truss Head screw U

Resumen del contenido incluido en la página 6

® CANNON LIMITED WARRANTY Johnson Outdoors Inc. warrants to the original purchaser that the accompanying product (see exclusions below) is free from defects in material or workmanship for a period of one (1) year from the date of purchase. Within the warranty period, Johnson Outdoors Inc. will, at its option, either repair or replace same without charge (but no cash refunds will be made). The unit must be returned, prepaid and with proof of the date of purchase to the following: ●