Resumen del contenido incluido en la página 1
Manual
Owner's
CRRF¥$MnN
7.8 HORSEPOWER
3000 PSI 2.6 GPM
HIGH PRESSURE WASHER
Model No.
580.763000
CAUTION: Before using this
product, read this manual and
follow all Safety Rules and
Operating Instructions.
HOURS: Mon,- Fri. 8 a.m. to 5 p.m. (CST)
60179
SEARS, ROEBUCK and CO., Hoffman Estates, IL
Part No, 21619 Draft 10 (411/97)
Resumen del contenido incluido en la página 2
SAFETY RULES . ............................ 2 SERVICE AND ADJUSTMENTS ................ 14 ASSEMBLY PARTS PACKED IN MANAUAL BAG . ..3 STORAG E ................................. 15 ASSEMBLY ................................ 4-5 TROUBLESHOOTING ........................ 16 OPERATION .............................. 6-10 REPLACEMENT PARTS ............ _...... 17-27 MAINTENANCE .......................... 11-14 HOW TO ORDER PARTS ............. BACK PAGE LIMITED ONE YEAR WARRANTY ON CRAFTSMAN HIGH PRESSURE
Resumen del contenido incluido en la página 3
PREPARATION: with the mask so you are certain the mask will pro- vide the necessary protection against inhaling harm- Operate engine onlyatgoverned speed, Running ful vapors, theengine atexcessive speeds increases thehaz- • High pressure spray may damage fragile items ardofpersonal injury. Donottamper withparts including glass. Do not point spray gun at glass which mayincrease ordecrease thegoverned when in the jet spray mode. speed. • Keep the hose connected to machine or the spray ° Do not wea
Resumen del contenido incluido en la página 4
your pressure washer for operation, however, you will CARTON CONTENTS need to perform the following tasks: The following parts are shipped loose with your pressure ° Attach wire basket to topside of guide handle with (4) washer: #10 self-drilling screws using the 5/16" wrench. • Main Unit -- pressure washerwith wheels ° Wire Basket SCREWS • Manual Bag that includes Nozzle Cleaner Kit • Parts Box (which includes the following items) • Spray Gun ° Wand Extension with Hi-Lo Adjustable Nozzle • Prod
Resumen del contenido incluido en la página 5
, Remove the plastic cap from the high pressure out- • Place assembled spray gun on holder. let. Feed the high pressure hose through the hose guide and then connect the hose to the outlet. HOSE GUIDE • Connect nozzle extensk)n to spray gun. CHECKLIST Before you operate your new high pressure washer, to be sure you receive the best performanceand sat- isfaction from this quality product, please review the following checklist: ° All assembly instructionshave been completed. ° The high pressure hos
Resumen del contenido incluido en la página 6
KNOW YOUR HIGH PRESSURE WASHER READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR HIGH PRESSURE WASHER. Compare the illustrations with your high pressure washer to familiarize yourself with the locations of various controls and adjustments, Save this manual for future reference, r.,. \\ GASOLINE TANK -'_"_-'_ ENGINE RUNISTOP GUIDE i SWITCH FUEL CAP !-':k -_, _ ' RECOIL STARTER tLE DETERGENT PICKUP TUBE AND FILTER HOSE GUIDE GUN AND W_ND ASSEMBLY PRIMER BULB WIRE BASKET PUMP INTAKE S
Resumen del contenido incluido en la página 7
HOW TO USE YOUR PRESSURE WASHER • Twisting the nozzle adjusts the spray pattern from a stream pattern to a fan pattern. IF YOU HAVE ANY PROBLEMS OPERATING YOUR PRESSURE WASHER, PLEASE CALL THE PRESSURE WASHER HELPLfNE AT 1-800-222-3136, HOW TO ADJUST PRESSURE AND SPRAY y PATTERN WARNING: Never adjust spray patterm when spraying. Never put hands in front of spray nozzle to adjust spray pat- tern. You could be injured. On the end of your spray gun is a nozzle that you can slide forward and backwar
Resumen del contenido incluido en la página 8
• Place smallfilteroftheclear, detergent siphoning tube RINSING WITH THE PRESSURE WASHER intothedetergent container. ° Hook up the water supply and start your pressure NOTE:Thefirststepinvolves applying anappropriate washer (see TO START PRESSURE WASHER on detergent/solvent solution topenetrate andloosen grime. page 9). Thedetergent isapplied atlowpressure toavoid splash- ° Slide adjustable nozzle sleeve backward to high pres- ing,overspraying andwaste. Leave thesolution onsur- sure position and
Resumen del contenido incluido en la página 9
BEFORE STARTING THE ENGINE IMPORTANT: It is important to prevent gum deposits from forming in essential fuel system parts such as the To operate the engine you wilt need the following: carburetor, fuel filter hose or tank during storage. Also, experience indicates that alcohol-blended fuels (called ENGINE OIL gasohef or using ethanol or methanol) can attract mois- ture which leads to separation and formation of acids dur- A 20 oz. bottle of SAE 30 weight oil is included in the ing storage. Acidi
Resumen del contenido incluido en la página 10
Connect the garden hose tightly to water inlet opening if engine fails to start, repeat the priming process and on the pressure washer pump and turn the water ON, press the trigger to relieve water pressure then pull starter handle slowly until you again feel resistance t Be sure fuei shut-off valve is open. and then pull rapidly up to three (3) times. i Set RUN/STOP switch to RUN position. NOTE: A small amount of water will squirt out when you release the pressure. o Squeeze trigger on pressure
Resumen del contenido incluido en la página 11
CUSTOMER RESPONSIBILITIES MAINTENANCE SCHEDULE FILL iN DATES AS YOU COMPLETE HOURLY OPERATING INTERVAL REGULAR SERVICE Every 25 Every 50 Every 100 Before Hours or Hours or Hours or MAINTENANCE TASK SERVICE DATES Each Use YearJy Yearly Yearly PRESSURE WASHER 3heck/ctean inlet screen. xt iCheck high pressure hose. x .,...,..,:... .......... x Check detergent hose and filter. ...,.,. ,.,:, ...... Check gun and wand for leaks. x Purge pump of air and contaminents. X ENGINE Check oil IeveL x Change e
Resumen del contenido incluido en la página 12
BEFORE EACH USE PUMP MAINTENANCE • Check water inlet screen for damage. WARNING: Do not attempt to disasembly A • Check high pressure hose for leaks, the pump. Without the proper technique, attempting to disasemble pump may cause • Check detergent inlet hose and falterfor damage. personal injury. For service, consult a - Check gun and wand assembly for leaks. Sears authorized service center or contact your place of purchase. • Purge pump of air and containments. • Check engine oillevel. ENGINE M
Resumen del contenido incluido en la página 13
RETORQUE HEAD BOLTS Wash precteaner in soapy water. Squeeze pre-filter dry in clean cloth (DO NOT TWIST), After 50 hours of operation, retorque the head bolts for o Clean air cleaner cover before installing it. this engine to 4.0 kgim (29 foot-pounds). To clean or replace paper air filter: The torque sequence is A, B, C, D, E (star pattern). o Remove air cleaner cover; then remove foam pre-fitter (service if necessary) and remove paper filter. D 8 • Clean paper filter by tapping it gently on a s
Resumen del contenido incluido en la página 14
CLEAN/REPLACE SPARK PLUG SET PLUG GAP AT 0.030 inch (0.76 mm) Change the spark plug every 100 hours of operation or once each year, ,whichever comes first. This will help your engine to start easier and run better. Replace with Champion RC12YC or equivalent type spark plug. Set spark plug gap 0.030 inch (0,76mm). '\ '\ \'\ CARBURETOR • Remove nozzle from the end of the wand using a 2mm or 5/64 allen wrench (like the one included in the kit). The carburetor of your high pressure washer is pre-set
Resumen del contenido incluido en la página 15
It is important to prevent gum deposits from forming in AFTER EACH USE essential fuel system parts such as the carburetor, fuet fil- Water should not remain in the unit for long periods of time. ter, fuel hose or tank during storage. Also, experience Sediments of minerals can deposit on pump partsand indicates that alcohol-blended fuels (called "gasohor' or "freeze" pump action. Followthese procedures after every using ethanol or methanol) can attract moisture which use: leads to separation and
Resumen del contenido incluido en la página 16
PROBLEM ' CAUSE CORRECTION 1. Nozzle in low pressure mode. 1 Pump has following problems: • Pull nozzle backward for high failure to produce pressure, erratic pressure mode. pressure, chattering, loss of 2. Low regulator pressure 2. Adjust regulator to desired setting. 3. Water inlet is blocked. 3, Clear inlet pressure, low water volume. 4, Inadequate water Supply 4. Provide adequate water flow, 5. Inlet hose is kinked or leaking 5. Straighten inlet hose, patch leak. 6. Check and clean inlet hos
Resumen del contenido incluido en la página 17
CRAFTSMAN 3000 PSI HIGH PRESSURE WASHER 580.763000 3O 36 37 8 I1 47 33 ITEM PART NO, DESCRIPTION ITEM PART NO. DESCRIPTION 76361 Governor Gear Thrust Washer (1req.) Control Rod Assembly (1 req.) 27 78621 1 M8-1.25 x 35ram Screw (6 req.) 89230 Piston Pin (t req.) 28 76389 2 99922 Spring Washer (1 req.) Piston Ring Set (t req.) 29 88411 3 86293 Valve Spring Retainer (1 req.) Gear Cover Assembly (1 req.) 30 4 89665A 88401 Valve Spring (2 req.) M8 x 52mm Head Bolt (5 req.) 31 77168 5 84186 Valve Spr
Resumen del contenido incluido en la página 18
CRAFTSMAN 3000PSI HIGH PRESSURE WASHER 580.763000 I 5 5_ NO OIL FILTER 4 ITEM PART NO. DESCRIPTION I 94820 EXPANSION PLUG (1 REQ,) 2 91848 OIL FILTER GASKET (t REQ,) 3 88758 OIL BLOCKOFF (1 REQ,) 4 92978 M6 x 20ram SCREW (2 REQ,) 5 99236 OIL PRESSURESWITCH (I REQ,) . t8
Resumen del contenido incluido en la página 19
-,4 CRAFTSMAN 3000 PSI HIGH PRESSURE WASHER 580.763000 GRiN 14 16 25, 15 9 21 4 10 17 / 23 26 12 B_ c_N 24 LowOil Shutdown with Engine ,% \ , 27 2o- I 28 29 3O PART NO. QTY. DESCRIPTION ITEM PART NO. DESCRIPTION ITEM Spark Plug- (I req.) 7 78653 RunlStop Switch (1 req.) 20 72347 Governor Lever (I req.) 8 85272 L.E.D. Assembly (1 req.) 21 86962 Wear Washer (I req.) Low Oil Shutdown Decal (1 req.) 22 85953 9 84195 85620 Adjust Screw (1 req.) 10 Black Sleeving (1 req.) 23 83502 M8 x 15ram Taptite 1
Resumen del contenido incluido en la página 20
REPAIR PARTS CRAFTSMAN 3000 PSI HIGH PRESSURE WASHER 580.763000 CARBURETOR ANDAIR MUFFLER CLEANER 4.3 44 45 46 55 76 39 56 DESCRIPTION ITEM PART NO. 57 4t 58 4O 73 89476 Muffler Gasket (I req.) PRIMER CARBURETOR 74 40976 M8 x 20mm Capscrew (2 req.) 75 88688 Small Muffler (I req.) DESCRIPTION ITEM PART NO. 76 66476, M6 x i2 HHFS (2 req.) 90947 31 Breather Hose (1 req.) 32 90051 Manifold Head Gasket (I req.) 51767 33 M6 x 55ram Capscrew (1 req.) 34 80318 M6 x 25mm Capscrew (I req.) 35 80316 M6 x 3
