Resumen del contenido incluido en la página 1
Owner's Manuam
;H
7.25 HORSEPOWER
3000 PSI
2.7 GPM
Modem No. 580.753000
Safety
Assembmy
HOURS: Mon.- Fri. 8 a.m. to 5 p.m. (CT)
Operation
" Maintenance
CAUTION: Before using this product,
, Parts
read this manual and fotlow ati Safety
o EspaSol
Rules and Operating [nstructionso
SEARS, ROEBUCK and CO., Hoffman Estates, IL 60179 U.S.A.
visit our Craftsman website: www.sears.comlcraftsman
Part No 194190 Draft 4 (05/04/2004) 9 8
Resumen del contenido incluido en la página 2
WARRANTY .................................... 2 STORAGE .................................. 16-17 SAFETY RULES ............................... 2-4 NOTES ................................... 18 & 27 KNOW YOUR PRESSURE WASHER ................ 5 TROUBLESHOOTING ............................ 19 ASSEMBLY ................................... 6-8 REPLACEMENT PARTS ....................... 20-25 OPERATION ................................. 9-11 EMISSION CONTROL WARRANTY ................. 26 MAINTENANCE ......
Resumen del contenido incluido en la página 3
tn the State of California a spark arrestor is required WARNING _y law (section 4442 0f the california Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands If you equip the muffler wit h a spark arresteri it must be maintained in _=ffec-tiveworking order.You can order a spark arrestor through your authorized Sears service den!or. ............ WHEN ADD!NG FUEL ,Turn pressure washer OFF and !et it coo! at least WARNING I 2 rninutes before removing gas cap
Resumen del contenido incluido en la página 4
WARNING CAUTION ' DO NOT secure sprayg un in open position ,DO NOT ]eave spray gun unattended while machine is running • , NEVER use a spray gun which does not have a trigger !ock 0r trigger guard in p!ace and in working order. ,Always be certain spray gun, nozzles and accessories are correct!y attached. WARNING CAUTION CAUTION , !f you have questi0ns abo_ intended use, ask dealer or contact sears. ,NEVER operate units with broken or missing parts;or without protective housing or covers. ,DO NOT
Resumen del contenido incluido en la página 5
KNOW YOUR PRESSURE WASHER Read the owner's manual and safety rules before operating your pressure washer. Compare the illustrationswith your pressure washer to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference. Fuel Tank Throttle Lever Choke Lever Accessory Tray Recoil Starter (on front of engine) Filter Nozzle Extension with Quick Connect Spray Tips Oil Fill Cap Chemical Injection Siphon/Filter Pump equipped with Automatic Cool Do
Resumen del contenido incluido en la página 6
Yourpressure washerrequires someassembly andis ASSEMBLING YOUR PRESSURE readyfor useonlyafterit hasbeenproperly serviced WASHER withtherecommended oilandfuel. Your Craftsman high pressure washer was mostly If you have any problems with the assembly of assembled at the factory. However, you will need to your pressure washer, please call the pressure perform these tasks before you can operate your washer helpline at 1-800-222-3t 36. pressure washer: IMPORTANT: Any attempt to run the engine before
Resumen del contenido incluido en la página 7
NOTE:Itmaybenecessary to movethehandle Add Engine Oil supports fromsideto sideinordertoalignthehandle IMPORTANT: Any attempt to crank or start the engine soitwillslideoverthehandlesupports. before it has been properly serviced with the 4. Insert"L"boltthroughholeonrightsideof handle recommended oil may result in an engine failure. (viewing fromhandlesideof unit)andattach NOTE: When adding oil to the engine crankcase, use plasticknob.Tighten knobbyhand. only high quality detergent oil rated with
Resumen del contenido incluido en la página 8
Slowlyaddfueltofueltank.Usea funnelto Inspect inlet preventspillage. Filltankto about1.5"belowtop screen; DO of thefillerneck. J , _;':_:i :_:./_ NoT use if .- aa agea cea if di_. Fuel Run water through garden hose for 30 seconds to flush it of debris. Turn off water. Install fuel cap and wipe up any spilled fuel. IMPORTANT: DO NOT siphon standing water for the water supply. Use ONLY cold water (less than 100°F). IMPORTANT: It is important to prevent gum deposits from forming in essential fuel s
Resumen del contenido incluido en la página 9
10. Rotate fuel shut-off valve to "On" position (fully HOW TO USE YOUR PRESSURE counter-clockwise). WASHER J If you have any problems operating your pressure Fuel Valve shewn in washer, please call the pressure washer helpline at 1-800-222-3136. "On_ pesition To Start Your Pressure Washer To start your engine-powered pressure washer for the 11. Move variable pressure control lever to 'High" first time, follow these instructions step-by-step. This position, shown on engine as a rabbit. starting i
Resumen del contenido incluido en la página 10
How to Stop Your Pressure Washer Low Pressure Move variable pressure control lever on engine to "Stop" position. Squeeze trigger on the spray gun to relieve pressure in the hose. NOTE: A small amount of water will squirt out when Use to apply you release the pressure. chemical Black How to Use Accessory Tray The unit is equipped with an accessory tray with places to store your nozzle extension and turbo nozzle, and High Pressure slots to hold the cleaning solution bottle and the detergent siphon
Resumen del contenido incluido en la página 11
To apply detergent follow these steps: After you have applied detergent, scour the surface and rinse it clean as follows: 1. Review spray tip use. 1. Apply safety latch to spray gun. 2. Prepare detergent solution as required by manufacturer. 2. Remove black chemical nozzle from nozzle extension. 3. Hang detergent solution on "J" hook attached to accessory tray. 3. Select and install desired high pressure nozzle following instructions "How to Use Spray Tips"on page 10. 4. Keep spray gun a safe di
Resumen del contenido incluido en la página 12
OWNER'S RESPONSIBILITIES Follow the hourly or calendar intervals, whichever occurs first. More frequent service is required when operating in adverse conditions noted below. F!LL IN DATES AS YOU CQMpI-ETE HOURLy OPERAT!NG REGULAR SERVICE INTERVAt_ I }=r_v!_=: U'_=} MAINTENANCE TASK Ho_rs0r ................................................. PRESSURE WASHER ..i_ I I I ChecktcJean water inlet screen ^ _ I I I Check high pressure hose IX _ I I ] Check detergent hose I X _ I I ] Punge pump of air and
Resumen del contenido incluido en la página 13
2. Place in-line filter screen into threaded end of BEFORE EACH USE nozzle extension. Direction does not matter. Push 1. Check engine oil level. screen in with eraser end of pencil until it rests flat 2. Check water inlet screen for damage. at bottom of opening. Take care to not bend 3. Check high pressure hose for leaks. screen. 4. Check chemical filters for damage. 3. Place o-ring into recess. Push o-ring snugly 5. Check spray gun and nozzle extension assembly against in-line filter screen. fo
Resumen del contenido incluido en la página 14
. Using a garden hose, remove additional debris by Change oil while engine is still warm from running, as back flushing water through nozzle extension, follows: Back flush between 30 to 60 seconds. 1. Drain fuel tank by running pressure washer until fuel tank is empty. Disconnect spark plug wire and keep it away from spark plug. 3. Remove oil drain plug and drain oil into 6. Reinstall spray tip and in-line filter into nozzle appropriate receptacle. extension. 4. Reinstall drain plug. Remove oil
Resumen del contenido incluido en la página 15
Carburetor Service Spark Plug Service the spark plug every 100 hours of operation or If you think your carburetor needs adjusting, see your yearly, whichever occurs first. nearest Sears service center. Engine performance may be affected at attitudes above 7000 feet. For WARNING operation at higher elevations, contact your nearest Sears service center. Spark Arrester Service Your engine is not factory-equipped with a spark arrester. In some areas, it is illegal to operate an engine without a spar
Resumen del contenido incluido en la página 16
AFTER EACH USE WINTER STORAGE Water should not remain in the unit for long periods of time. Sediments or minerals can deposit on pump parts and "freeze" pump action. Follow these procedures after every use: 1. Flush detergent siphoning tube by placing the filter into a pail of clean water while running pressure Freeze damage is not covered under warranty washer in low pressure mode. Flush for one to two minutes. To protect the unit from freezing temperatures: 1. Flush detergent siphoning tube by
Resumen del contenido incluido en la página 17
LONG TERM STORAGE Oil Cylinder Bore Remove spark plug. Squirt about 1 tablespoon of If you do not plan to use the pressure washer for more clean engine oil into the cylinder. Cover spark plug than 30 days, you must prepare the engine and pump hole with rag. Pull recoil handle slowly to distribute for long term storage. oil. Avoid spray from spark plug hole. It is important to prevent gum deposits from forming in Install spark plug. DO NOT connect spark plug essential fuel system parts such as th
Resumen del contenido incluido en la página 18
18
Resumen del contenido incluido en la página 19
Problem Cause Correction 1. LOWpressure spray tip installed. !. Rep!ace Spray t!p With high pressure spray tip. 2i water inlet is bleckedi 2. Clearinleti 3. inadequate water supply. 3. provide adequate water f!_ 4_ Inlet hose is kinked or leaking. 4. Straighten inlet hose; patch i leak. Pump has following problems: ..................................................................................................................... fa ure tO produce pressure 5. c 0gged in et hose Stranet 5" Check
Resumen del contenido incluido en la página 20
CRAFTSMAN 3000 PSI Pressure Washer 580.753000 Main Unit -- Exploded View and Parts List -_7 I2÷ ÷L l°o o! Item Part # Description Item Part # Description 1 M190156GS BASE 12 192796GS KIT, Chem Hose & Filter 2 M187602GS HANDLE 13 192199GS ASSY, Extension 3 187606GS BILLBOARD 14 B1862BGS GUN 4 192648GS ASSY, Complete Hose Reel Kit 15 B5167GS HOSE 5 194004GS KIT, Inlet, Hose, Grdn, Srv 16 194298GS THERMAL RELIEF 6 192134GS KIT, Engine Mounting Hardware 17 190668GS KIT, Handle Fasteners 7 95457GS A
