Manual de instrucciones de Citizen ANA-DIGI JMOXXX

Resumen del contenido incluido en la página 1

3. ADJUSTING THE DIGITAL TIME DISPLAY
CITIZEN QUARTZ
1. Press  M button to set to
TIME
ANA-DIGI
the normal TIME display
Model No. 30-7XXX, JMOXXX
Cal. No. C20❈, C480, T011
2. Press  S button until
SECONDS
SECONDS start flashing.
3. Press  R to set seconds to
• INSTRUCTION MANUAL “00”.
CTZ-6751
4. Press  S for MINUTES
MINUTES
adjustment. MINUTES
start flashing.
5. Press  R and adjust the
minutes.
6. Press  S for Hours
HOURS
adjustment. HOURS start
flashing.
7. Press  R and adjust the
hours.
8

Resumen del contenido incluido en la página 2

4. SETTING AND USING THE ALARM 6. ADJUSTING THE CALENDAR • The setting procedure of the ALARM time is the 1. Press  M button to set to CALENDAR same as that of the TIME display. Setting order is the normal CALENDAR as follows: ALARM•HOURSMINUTES display. • The HOURS display will synchronise with the selection of 12 or 24 HOURS in the TIME adjustment. • If the watch is left in the adjustment mode for more 2. Press  S until DATE starts DATE than 1 minute without operating any button, AUTO flashi

Resumen del contenido incluido en la página 3

8. BATTERY REPLACEMENT/ RESET • Press the  M ,  S and  R buttons simultaneously following battery replacement operations to reset the watch. Failure to reset the watch after battery replacement will result in improper timekeeping. • Pressing all three buttons simultaneously will cause the watch display to highlight and a confirmation signal to sound indicating the reset operation is complete. Upon reset the watch displays will return to the following initial settings: Time: AM 12:00.00 Alarm:

Resumen del contenido incluido en la página 4

10. SPECIFICATIONS 1. Model Name: CITIZEN QUARTZ Combination Quartz watch 2. Quartz oscillator frequency: 32,768Hz 3. Accuracy when worn under normal temperature: Within 30 seconds per month 4. Display types: Analog – Hours, Minutes and Seconds Hand. Digital – FE-type nematic liquid crystal 5. Digital display method: Push button operated change-over display Time: Hours, Minutes, Seconds, AM/PM (A/P) Calendar: Month, Date, Day Alarm: Hours, Minutes, AM/PM (A/P) Stopwatch: Minutes, Seconds, 1/100