Resumen del contenido incluido en la página 1
MO1103-EA
Operation Guide 5113 5213
ENGLISH
Congratulations upon your selection of this CASIO watch.
Applications
The built-in sensors of this watch measure direction, barometric pressure, temperature and altitude.
Measurement results are indicated by the second hand of the watch and on the digital display. Such
features make this watch useful when hiking, mountain climbing, or when engaging in other such outdoor
activities.
Warning !
• The measurement functions built into this watch are not
Resumen del contenido incluido en la página 2
Operation Guide 5113 5213 E-76 Adjusting Home Positions Charging the Watch E-76 To adjust home positions The face of the watch is a solar cell that generates power from light. The generated power charges a E-77 Illumination built-in rechargeable battery, which powers watch operations. The watch charges whenever it is exposed E-77 To turn on illumination manually to light. E-78 To change the illumination duration Charging Guide E-80 To turn the auto light switch on and off E-82 Button Operation
Resumen del contenido incluido en la página 3
Operation Guide 5113 5213 Selecting a Mode • You can use buttonsA,B, andC to enter a sensor mode directly from the Timekeeping Mode or • The illustration below shows which buttons you need to press to navigate between modes. from another sensor mode. To enter a sensor mode from the Data Recall, Stopwatch, Countdown • To return to the Timekeeping Mode from any other mode, hold downD for about two seconds. Timer, Alarm, World Time, or Hand Home Position Adjustment Mode, fi rst enter the Timekeepi
Resumen del contenido incluido en la página 4
SE SE ESE ESE E E ENE ENE NE NE NNE NNE N N NNW NNW Operation Guide 5113 5213 Taking Direction Readings Display To do this: Do this: Change the year The Compass Mode uses the watch’s direction sensor to detect magnetic north. The second hand will UseA (+) andC (–). indicate magnetic north and the digital display shows one of 16 directions and an angle value. Change the month or day 12 o’clock 12 o’clock Nor North indicated by th indicated by To take a direction reading position position se
Resumen del contenido incluido en la página 5
Operation Guide 5113 5213 3. Rotate the map without moving the watch so the northerly direction To fi nd the bearing to an objective Nor North indicated th indicated indicated on the map matches north as indicated by the watch. 1. Set the map so its northerly indication is aligned with north as indicated on the map on the map • If the watch is confi gured to indicate magnetic north, align the by the watch, and determine your current location. map’s magnetic north with the watch indication. If
Resumen del contenido incluido en la página 6
Operation Guide 5113 5213 Pressure Sensor and Temperature Sensor Calibration To calibrate the pressure sensor and the temperature sensor 1. Take a reading with another measurement device to determine the The pressure sensor and temperature sensor built into the watch are calibrated at the factory and normally exact current barometric pressure or temperature. require no further adjustment. If you notice serious errors in the pressure readings and temperature readings produced by the watch, you
Resumen del contenido incluido en la página 7
Operation Guide 5113 5213 Confi guring the Altitude Differential Scale You can select either of the two altitude differential scale options described below. Current altitude 1000 m (4000 ft) 500 m (2000 ft) reading greater than To specify this: Select this setting: previous reading Unit: 50m (200ft) 100 m (400 ft) 50 m (200 ft) Scale step: 5 meters (20 feet) per second mark 100 Unit: 5m (20ft) Scale range: ±100 meters (± 400 feet) Second hand Scale step: 50 meters (200 feet) per second mark
Resumen del contenido incluido en la página 8
Operation Guide 5113 5213 The total Cumulative Ascent and Cumulative Descent values produced by an Altimeter Mode How does the altimeter work? measurement session during the example climb illustrated above are calculated as follows. Generally, air pressure and temperature decrease as altitude increases. This watch bases its altitude Cumulative Ascent: q q (300 m) +e e (620 m) = 920 m measurements on International Standard Atmosphere (ISA) values stipulated by the International Civil Cumula
Resumen del contenido incluido en la página 9
Operation Guide 5113 5213 Manual Save 1 Manual Save 14 High Altitude (HI) 3. After you are fi nished viewing data, use D to exit the Data Recall Mode. • - . - - will be displayed if data has been deleted or if there is no corresponding data due to error, etc. In such cases, cumulative ascent ( ASC ) and cumulative descent ( DSC) va lues will show zero. Hour : Minutes • When the cumulative ascent ( ASC ) or cumulative descent ( DSC ) exceeds 99,995 meters (or 327,980 1 second 1 second feet)
Resumen del contenido incluido en la página 10
Operation Guide 5113 5213 To test the alarm Checking the Current Time in a Different Time Zone In the Alarm Mode, hold downA to sound the alarm tone. You can use the World Time Mode to view the current time in one of 29 time zones (29 cities) around the To turn an alarm and the Hourly Time Signal on and off globe. The city that is currently selected in the World Time Mode is called the “World Time City”. 1. In the Alarm Mode, useA andC to select an alarm or the Hourly Time Signal. • You also ca
Resumen del contenido incluido en la página 11
Operation Guide 5113 5213 To turn the auto light switch on and off Auto light switch precautions 1. In the Timekeeping Mode, hold downE until each of the following • Wearing the watch on the inside of your wrist, movement of your arm, or vibration of your arm can steps occurs. cause frequent activation of the auto light switch and illumination. To avoid running down the battery, • Hold SET appears on the digital display. ➝ HT fl ashes. ➝ Second turn off the auto light switch whenever eng
Resumen del contenido incluido en la página 12
Operation Guide 5113 5213 Altimeter: Pressure Sensor Precision: Measurement range: –700 to 10,000 m (or –2,300 to 32,800 ft.) without reference altitude Conditions (Altitude) Altimeter Barometer Display range: –10,000 to 10,000 m (or –32,800 to 32,800 ft.) Negative values can be caused by readings produced based on a reference altitude or due to ± (altitude differential × 2% 0 to 6000 m + 15 m) m atmospheric conditions. 0 to 19680 ft. ± (altitude differential × 2% ± (pressure differential × 2%
