Resumen del contenido incluido en la página 1
Resumen del contenido incluido en la página 2
All Rights Reserved. Copyright © 2007 The use, disclosure, modification, transfer, or transmittal of this work for any purpose, in any form, or by any means, without the written permission of the copyright holder, is strictly forbidden. Disclaimer The content of this manual is subject to change without notice and should not be construed as a commitment by the manufacturer, distributor, or service provider. This manual is furnished for informational use only and the manufacturer, di
Resumen del contenido incluido en la página 3
Linksys PAP2 Devices Administrator’s Guide Table of Contents 1 WELCOME ............................................................... 2 OVERVIEW ............................................................................ 2 CONFIGURING THE PAP2 DEVICE WITH NET2PHONE’S PROVISIONING SERVER ......................................................... 3 REMOVING VOICELINE SERVICE ............................................ 9 i
Resumen del contenido incluido en la página 4
Linksys PAP2 Devices Administrator’s Guide 1 1 Welcome Overview Congratulations on purchasing your Linksys PAP2 telephone adapter! The Linksys PAP2 device is a voice over Internet protocol telephone adapter. It is based on the SIP (Session Initiation Protocol), which is by far the most widely used protocol by Internet telephone service providers (ITSP). The PAP2 device can be directly connected to a broadband Internet connection to access the services provided by the ITSPs. Prio
Resumen del contenido incluido en la página 5
Linksys PAP2 Devices Administrator’s Guide Configuring the PAP2 device with Net2Phone’s Provisioning Server NOTE: The provisioning process can be completed prior to provisioning the device in the Partner Resource Center. TO PROVISION THE LINKSYS PAP2 DEVICE: 1. Determine which PAP2 device you are using. By turning the device over you can view the model number of the device type you are configuring – PAP2-NA, PAP2T-NA, or PAP2T-R. Refer to the following images to identify
Resumen del contenido incluido en la página 6
Linksys PAP2 Devices Administrator’s Guide PAP2T-NA PAP2T-R 4
Resumen del contenido incluido en la página 7
Linksys PAP2 Devices Administrator’s Guide STOP!: Be sure to identify the correct device prior to provisioning. The service will not function if the incorrect provisioning string is used. 2. Connect the Linksys PAP2 to your network by connecting one end of a network cable to the Ethernet port and the other end to your broadband router. Once the adapter is connected to the network 3. If you have the: • PAP2-NA or PAP2T-NA, continue with the next step. • PAP2T-R, proceed to Step 1
Resumen del contenido incluido en la página 8
Linksys PAP2 Devices Administrator’s Guide 9. Enter your Login and Password. 10. Click the switch to advanced view link at the top of the page. 11. Select the Provisioning tab at the top of the page. 12. In the Profile Rule field enter the string assigned to your particular PAP device model. PAP2-NA: http://prov1.net2phone.com/pap2/prov.aspx?id=$ MA&ver=$SWVER 6
Resumen del contenido incluido en la página 9
Linksys PAP2 Devices Administrator’s Guide PAP2T: http://prov1.net2phone.com/pap2t/prov.aspx?id=$MA &ver=$SWVER IMPORTANT: The string is case-sensitive and must be entered exactly as it appears. Failure to do so will render the adapter non-functional. 7
Resumen del contenido incluido en la página 10
Linksys PAP2 Devices Administrator’s Guide IMPORTANT: Be certain that you are using the correct string for your particular PAP device model number. Failure to do so will render the device non-functional. 13. Click the Submit all changes button at the bottom of the page . 14. Reboot the PAP device by disconnecting the A/C power cord from the device, waiting 5 seconds, and re-connecting it. 15. After the adapter reboots, if an account has already been created for the device in PRC (Pa
Resumen del contenido incluido en la página 11
Linksys PAP2 Devices Administrator’s Guide Removing VoiceLine Service The following procedure removes the VoiceLine account from the PAP2 device. Login to the Partner Resource Center and close the device’s account from the Edit Device Information page. 1. Wait 10 minutes and reboot the device by removing the A/C power cord from the adapter, waiting 5 seconds, and re-connecting it. After rebooting, lift the handset to ensure there is no dial tone. 2. Lift the handset and dial ****
