Manual de instrucciones de Panasonic KX-DT390

Resumen del contenido incluido en la página 1

DT390M_QRG.fm Page 1 Friday, February 27, 2009 11:02 AM
Quick Reference Guide
Digital DSS Console
Model No. KX-DT390
Thank you for purchasing a Digital DSS Console. Please read this
manual carefully before using this product and save this manual for
future use. This manual is designed to be used with your Digital
DSS Console and a Panasonic PBX.
The Digital DSS Console can be used with the following Panasonic
Digital Proprietary Telephones (DPTs): KX-DT333, KX-DT343, and
KX-DT346.
The Di

Resumen del contenido incluido en la página 2

DT390M_QRG.fm Page 2 Friday, February 27, 2009 11:02 AM Location of Controls DSS Buttons with Busy Lamp Field (BLF): To access an extension, simply press a DSS button. 39 54 69 84 38 53 68 83 These buttons also can be assigned for the 37 52 67 82 36 51 66 81 35 50 65 80 One-touch Dialing and reassigned to other 34 49 64 79 33 48 63 78 features. 32 47 62 77 31 46 61 76 30 45 60 75 The BLF indicates the current status of the 29 44 59 74 28 43 58 73 27 42 57 72 corresponding extension. 26 4

Resumen del contenido incluido en la página 3

DT390M_QRG.fm Page 3 Friday, February 27, 2009 11:02 AM Operation Board Angle Adjustment To lower: Raise the operation board to level 8. Next, with one hand on the base of the unit, lift the operation board again to release the latch, then slowly push the operation board down to level 1. If the operation board cannot be lowered to level 1, repeat this step. Attaching a DPT 1. Fit the protrusions on the 2. Attach the plate with the 4 KX-DT390 and a DPT into the screws (included). 4 holes o

Resumen del contenido incluido en la página 4

DT390M_QRG.fm Page 4 Friday, February 27, 2009 11:02 AM Wall Mounting CAUTION: Do not mount this unit on a wall while attached to a DPT. Doing so may damage the wall mounting adaptor or, may cause the unit to fall, possibly resulting personal injury. 1. Remove the wall mounting adaptor from the unit as shown. 2.Set the operation board to level 1, then connect and secure the telephone line cord. 3. Attach the wall mounting adaptor as shown. • Make sure the cord is not pinched by the wal

Resumen del contenido incluido en la página 5

DT390M_QRG.fm Page 5 Friday, February 27, 2009 11:02 AM Important Information When using a KX-DT390 Digital DSS Console, keep the following conditions in mind. • If you are having problems making calls, unplug the extension line and connect a known working Digital DSS Console. If the known working DSS Console operates properly, have the defective DSS Console repaired by an authorized Panasonic factory service center. If the known working DSS Console does not operate properly, check the P

Resumen del contenido incluido en la página 6

DT390M_QRG.fm Page 6 Friday, February 27, 2009 11:02 AM Important Information When you ship the product: Carefully pack and send it prepaid, adequately insured and preferably in the original carton. Attach a postage-paid letter, detailing the symptom to the outside of the carton. DO NOT send the product to the Executive or Regional Sales offices. They are NOT equipped to make repairs. Product service: Panasonic factory service centers for this product are listed in the service center dire

Resumen del contenido incluido en la página 7

DT390M_QRG.fm Page 7 Friday, February 27, 2009 11:02 AM Important Information CAUTION: To assure continued compliance with FCC rules, do not make any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device. When programming emergency numbers and/or making test calls to emergency numbers: 1) Remain on the line and briefly explain to the dispatcher the reason for the call before hanging up. 2) Perform such activities in the off peak hou

Resumen del contenido incluido en la página 8

for KX-DT390 DSS Console (with 60 Keys) 83 mm (3-1/4 in) 100 mm (3-15/16 in) 100 mm (3-15/16 in) 83 mm (3-1/4 in) for DPT DT390M_QRG.fm Page 8 Friday, February 27, 2009 11:02 AM 157 mm (6-1/5 in) One screw here One screw here WALL MOUNTING TEMPLATE 1. Drive the screws into the wall as indicated. Note: • If the KX-DT390 is mounted beside a DPT, leave 157 mm (6-1/5 in) of space between the 2 screws for the DPT and the 2 screws for the KX- DT390, as indicated above. This space is