Resumen del contenido incluido en la página 1
9300 Series Power Meter
User’s Guide
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
DANGER ElectricaI equipment contains hazardous voltages and high speed moving parts. Can cause death, serious injury or property damage. See safety instruction contained herein. Restrict use to qualified per- sonnel. The use of unauthorized parts in the repair of the equipment or tampering by unqualified personnel will result in dangerous conditions that can cause death, serious injury or property damage. IMPORTANT The information contained herein is general in nature and not intended for
Resumen del contenido incluido en la página 4
Notices Danger This symbol indicates the presence of dangerous voltage within and outside the product enclosure that may constitute a risk of electric shock, serious injury or death to persons if proper precautions are not followed. Caution This symbol alerts the user to the presence of hazards that may cause minor or moderate injury to persons, damage to property or damage to the device itself, if proper precautions are not followed. Note This symbol directs the user’s attention to
Resumen del contenido incluido en la página 5
CAUTION Observe the following instructions, or permanent damage to the meter may occur. The 9300 Series meter offers a range of hardware options that affect input ratings. The 9300 Series meter’s serial number label lists all equipped options. Applying current levels incompatible with the current inputs will permanently damage the meter. This document provides installation instructions applicable to each hardware option. The 9300 Series meter’s chassis ground must be properly connected to
Resumen del contenido incluido en la página 6
Resumen del contenido incluido en la página 7
Contents Chapter 1 Introduction 9300 Series Meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 The ACCESS Meter in an Enterprise Energy Management System . . . . . . . . 14 Data Display and Analysis Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Communications Protocols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Digital and Analog I/O Options . . . . . . . . .
Resumen del contenido incluido en la página 8
Meter Clock Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Display Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Demand Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Factory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Third
Resumen del contenido incluido en la página 9
Telnet and Hyperterminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 Digital and Analog I/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 Specifying a Port In an ION Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 Using the Onboard Digital Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 Using the Onboard Digital Inputs . . . . . . . . . . . .
Resumen del contenido incluido en la página 10
COM 2 Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 COM 3 Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148 Ethernet Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148 Profibus Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 11
1 Introduction The 9300 Series intelligent metering and control devices are typically used in enterprise energy management systems such as feeder monitoring and submetering, and offer unmatched value, functionality, and ease of use. These meters interface to WinPM.Net software or other automation systems for fast information sharing and analysis. The 9300 meter is an ideal analog meter replacement with a multitude of power and energy measurements, analog and digital I/O, communication port
Resumen del contenido incluido en la página 12
9300 Series Meters 9300 Series User’s Guide 9300 Series Meters The 9300 Series meters are intelligent metering and control devices suited to a wide range of applications. The meters can be used as stand-alone devices, but their extensive capabilities are fully realized when used as part of an enterprise energy management (EEM) system. EEM systems give energy suppliers, service providers, and large industrial and commercial energy consumers the tools to meet all the challenges and opportunit
Resumen del contenido incluido en la página 13
9300 Series User’s Guide 9300 Series Meters WinPM.Net™ is a powerful web-ready software suite that can process, analyze, store, and share information from across your entire organization. Its compatibility and flexibility means you can introduce individual components, at a pace you decide, while maintaining your original investments. You can access information and alarms from any workstation, pager, PDA, or cell phone locally or around the world, in the format you require. You can also perf
Resumen del contenido incluido en la página 14
The ACCESS Meter in an Enterprise Energy Management System 9300 Series User’s Guide The ACCESS Meter in an Enterprise Energy Management System Applications that include the meter typically require additional equipment. Display and analysis software tools are almost always used to manage, interpret and distribute the data measured or logged by a meter. There are usually a variety of tools used, and often these tools are connected using different communications standards and protocols. In man
Resumen del contenido incluido en la página 15
9300 Series User’s Guide Data Display and Analysis Tools The Front Panel Local monitoring and standalone applications are facilitated by the meter’s front panel interface. The front panel combines real-time display features as well as device configuration functions. The Remote Modular Display The Remote Modular Display (RMD) can be added to an existing 9300 Series- TRAN (Transducer) model to facilitate local monitoring and standalone applications. The 9300 Series Basic Model provides an integ
Resumen del contenido incluido en la página 16
Communications Protocols 9300 Series User’s Guide WinPM.Net also offers two ways to remotely view information through a web browser: WebReach and Microsoft Terminal Services. WebReach only requires an URL to display a meter’s real-time data and select views of historical and waveform data from a web browser; there is no client machine configuration. WebReach is a data display application; there is no control functionality available through it. Microsoft Terminal Services enable full WinPM
Resumen del contenido incluido en la página 17
9300 Series User’s Guide The Meter is Factory-Configured and Ready to Operate Digital Outputs All 9300 Series meters have four programmable digital output ports. These are suitable for pulsing or controlling relays. The Infrared Data Port and/or a rear panel LED can also be used for energy pulsing. Status Inputs Four optically isolated digital inputs on the 9330 and 9350 meters can monitor status, count transducer pulses, breaker trips and pulses from any external “volts free” dry contact. A
Resumen del contenido incluido en la página 18
Meter Firmware Revision History 9300 Series User’s Guide Meter Firmware Revision History 9300 Models Firmware Release Date Firmware Enhancements Version Rev B Hardware Initial Release Improved communications performance V250 June 2000 Four Calibration Pulsers added Harmonic update times improved Analog I/O supported V265 March 2001 New Calibration procedure V271 July 2002 Adds Web Server capabilities when combined with ETH73V272 firmware 9330 Models Firmware Release Date Firmware Enhancements
Resumen del contenido incluido en la página 19
9300 Series User’s Guide Ethernet Card Firmware Revision History Ethernet Card Firmware Revision History Firmware Release Date Firmware Enhancements Version V102 June 2000 Maintenance release (support for Rev B hardware) MeterM@il support added (with 9330V270 firmware) V270 September 2001 Modbus TCP support added Adds Web Server capabilities when combined with 9300 Series V271 firmware, MeterM@il (data V272 July 2002 logs) for the 9330 and 9350, and alerts for the 9350 Chapter 1 - Introducti
Resumen del contenido incluido en la página 20
Using this Guide 9300 Series User’s Guide Using this Guide This User’s Guide is directed at three types of user: the typical user or operator, the system administrator, and the advanced user. You might not fit into any of these groups directly, or perhaps you are both an operator and an administrator. These classifications are intended to make this guide easier to navigate with respect to which information is appropriate to your needs. Typical User or Operator Most users simply want to displ
