Manual de instrucciones de Metra Electronics 99-7609G

Resumen del contenido incluido en la página 1

INSTALLATION INSTRUCTIONS FOR PART 99-7609G INSTALLATION INSTRUCTIONS FOR PART 99-7609G
APPLICATIONS
INFINITI I30 2000-2001
INFINITI I35 2002-2004
99-7609G
KIT FEATURES
• DIN Head Unit Provision w/ Pocket
• ISO DIN Head Unit Provision w/ Pocket
• DDIN Head Unit Provision
• ISO Stacked Head Unit Provision
• Painted Gray to Match Factory Color & Finish
KIT COMPONENTS
• A) Radio Housing • B) Radio Housing Brackets • C) ISO Brackets • D) ISO Trim Plate
• E) DDIN Brackets • F) DDIN Trim Plate •

Resumen del contenido incluido en la página 2

99-7609G 99-7609G Infiniti I30 2000-2001 TABLE OF CONTENTS Infiniti I35 2002-2004 DASH DISASSEMBLY DDIN / STACKED ISO HEAD UNIT PROVISION • INFINITI I30 2000-01 / I35 2002-04 . . . . . . . . . . . . . . 1 1 Cut and remove the center bar from A the radio housing. (Fig. A) KIT PREPARATION 2 Snap the Double DIN brackets to • INFINITI I30 2000-01 / I35 2002-04 . . . . . . . . . . . . . . 2 the inside edge of the Double DIN trim plate. (Fig. B) KIT ASSEMBLY 3 Slide the Double DIN head unit

Resumen del contenido incluido en la página 3

99-7609G 99-7609G DASH DISASSEMBLY Infi niti I30 2000-01 / I35 2002-04 Infi niti I30 2000-01 / I35 2002-04 ISO DIN HEAD UNIT PROVISION 1 Disconnect the negative battery A 1 Mount the ISO Brackets to the head A terminal to prevent an accidental unit with the screws supplied with short circuit. the unit. (Fig. A) Unclip and remove the a/c vents 2 Snap the pocket into the bottom 2 above the radio. (Fig. A) opening of the radio housing. (Fig. B) Unclip and remove the shifter panel 3 sur

Resumen del contenido incluido en la página 4

99-7609G KIT PREPARATION 99-7609G KIT ASSEMBLY Infiniti I30 2000-01 / I35 2002-04 Infiniti I30 2000-01 / I35 2002-04 DIN HEAD UNIT PROVISION 1 Attach the radio housing brackets to 1 Slide the DIN cage into the Radio A A the radio housing using the supplied Housing and secure by bending the (4) Phillips screws. (Fig. A) metal locking tabs down. (Fig. A) 2 Secure the climate control to the Snap the pocket into the bottom 2 radio housing bracket assembly opening of the radio housing. usi