Resumen del contenido incluido en la página 1
Riva Open Log Burning
Convector Fireboxes
16", 22", 24", 26" & 28" Standard and Low models
Instructions for Use,
Installation and Servicing
For use in Great Britain and Republic of Ireland.
This appliance has been certified for use in countries other than those stated. To install this appliance in these countries, it is essential to obtain the translated
instructions and in some cases the appliance will require modification. Contact Stovax for further information.
IMPORTANT
This appliance will
Resumen del contenido incluido en la página 2
COVERING THE FOLLOWING MODELS: 8610/8611/8604/8605/8606/8607/8608/8609/8673 APPLIANCE COMMISSIONING CHECKLIST 3 COMMISSIONING 27 USER INSTRUCTIONS 4 MAINTENANCE & SERVICING 28 General Points 4 Annual Service 28 Using the Appliance for the first time 5 Removal of Flue Damper 28 Recommended Fuels 5 Lighting the appliance 6 Running the appliance 6 SERVICE RECORDS 30 Burning Tips 7 Ash Removal 8 EC DECLARATION OF CONFORMITY 31 Extended burning 9 Over-Firing
Resumen del contenido incluido en la página 3
APPLIANCE COMMISSIONING CHECKLIST To assist us in any guarantee claim please complete the following information:- Dealer appliance was purchased from Name: ..................................................................................................................................................................................... Address: .........................................................................................................................................................
Resumen del contenido incluido en la página 4
USER INSTRUCTIONS 1.12 To access the data plate: 1. GENERAL POINTS If a Contemporary Steel Frame is fitted, lift the frame off, see Installation Instructions Section 3 Fitting Of Frames. 1.1 Before use of this appliance please read these instructions fully. If fitted remove multi-fuel kit or log tray before lifting out the base plate, see Installation Instructions Section 2 Fitting 1.2 All local regulations, including those referring to national Of Fuel Kits. and European Standards nee
Resumen del contenido incluido en la página 5
USER INSTRUCTIONS Poor quality timber: — Causes low combustion efficiency WARNING — Produces harmful condensation — Reduces effectiveness of the airwash and life of the Properly installed operated and maintained this appliance appliance will not emit fumes into the room. Do not burn construction timber, painted, impregnated Occasional fumes from de-ashing and refuelling may occur. / treated wood, manufactured board products or pallet wood. Persistent fume emission is potentia
Resumen del contenido incluido en la página 6
USER INSTRUCTIONS 4. LIGHTING THE APPLIANCE 5. RUNNING THE APPLIANCE 4.1 For best results: 5.1 Burning Wood: • S e t d a m p e r c o n t r o l s , S e e D i a g r a m 6 To burn wood it is required to fit a log box as listed: Riva Open 16" 22" 24" 26" 28" Cassette Product Code Std 8610/ 8604/ 8606/ 8608/ 8673 Product Code Low 8611 8605 8607 8609 Holyrood Black 8627 8628 8629 8630 Holyrood Polished 8627P 8628P 8629P 8630P Open Castle 8623 8624 8625 Portcullis 8678 8666 8667 8668 8
Resumen del contenido incluido en la página 7
USER INSTRUCTIONS The multi-fuel kit is fitted as shown: 5.7 De-ash the fire bed before re-fuelling, See Section 7 Ash Removal Note that this kit must only be used with the appropriate Steel frame, Diagram 10. • Burn new fuel at high output for a few minutes before adjusting the Air Damper control* to the desired setting • Refuel little and often for clean, efficient burning. 5.8 Experience establishes control settings to suit personal preferences 5.9 Do not burn l
Resumen del contenido incluido en la página 8
USER INSTRUCTIONS — Smoke and small flames • Fit a rain cowl to the chimney — Short life span for grate Your installer should advise you on possible solutions. If the appliance emits smoke into the room continuously: 6.3 Flue Draught • Allow the appliance to go out The chimney has two main functions: • Ventilate the room to clear the fumes 1) To safely remove the smoke, gases and fumes from the house. Do not re-light the appliance until the problem is solved.
Resumen del contenido incluido en la página 9
USER INSTRUCTIONS • Use smokeless fuel or small, thick logs depending on fuel desired Poker 9. OVER-FIRING 9.1 Do not over-fill with fuel or use at maximum output for long periods or over-firing can occur. If the flue pipe, flue collar or top plate glow red the appliance is over-firing: • Close the Air Damper (Primary if multi-fuel kit fitted) control to reduce the output 9.2 Over-firing can cause permanent damage to the appliance. PR8074 10. CHIMNEY FIRE 7.3 Remove components
Resumen del contenido incluido en la página 10
USER INSTRUCTIONS Your retailer can provide genuine spare parts when required. An 13. CHIMNEY SWEEPING annual service by a competent engineer is recommended to keep your appliance in best possible condition. 13.1 To maintain safe and efficient use of the appliance the chimney/flue must be inspected and swept at least once a year by a qualified chimney sweep.* If the appliance is used continuously throughout the year or it is used to burn wood or smokeless fuel, more frequent sweeping is r
Resumen del contenido incluido en la página 11
TECHNICAL SPECIFICATION RIVA OPEN Model 4 6.5 8 9 10 Wood kW Nominal Heat Output 3 4 5 5 5 Solid Fuel kW 1.25 1.25 1.25 1.25 1.25 mm Flue Draught at Nominal Heat All Fuels 0.05 0.05 0.05 0.05 0.05 inch Wg 39.1 45.0 52.8 53.0 54.1 Wood g/s Flue Gas Mass Flow 27.8 30.0 75.1 45.0 49.5 Solid Fuel g/s 200 155 165 180 220 Wood °C Flue Gas Temperature at Spigot/Socket 110 125 120 150 150 Solid Fuel °C 2x(120x102) 3x(105x105) 3x(122x105) 3x(138x105) 3x(138x105) mm Flue Outlet Size 3 1 1 13 1 7 1 7 1 2x(
Resumen del contenido incluido en la página 12
TECHNICAL SPECIFICATION RIVA OPEN DIMENSIONS A C E B D PR8100 16" Low 22" Low 24" Low 26" Low 28" A 474 474 624 624 674 674 724 724 774 B 592 542 652 592 652 592 652 592 652 C 348 348 348 348 348 348 348 348 348 D 550 500 610 550 610 550 610 550 610 E 400 400 550 550 600 600 650 650 700 F 489 489 639 639 689 689 739 739 789 G 595 545 655 595 655 595 655 595 655 H 16 16 16 16 16 16 16 16 16 J 481 - - - - - - - - K 595 - - - - - - - - L 32 - - - - - - - - M Square - - 765 - - - 865 - - M Rectangul
Resumen del contenido incluido en la página 13
TECHNICAL SPECIFICATION RIVA OPEN DIMENSIONS PROFIL ARTS STEEL SQUARE/RECTANGULAR M SQUARE/RECTANGULAR P H L F J G K PR8100 PROFIL ARTS 16" 22" 24" 26" 28" 16" 22" 24" 26" 28" Profil Brass - 8633 8635 8637 8639 8626 Arts Frame 8700 - - - - standard height Profil Brass - STEEL 8674 8636 8638 8640 - low lintel 16" 22" 24" 26" 28" Profil Brushed Stainless - 8633BS 8635BS 8637BS 8639 8626BS standard height Steel Frame - 8730 8732 - 8736 - Rectangular Profil Brushed Stainless - 8674BS 8636BS 863
Resumen del contenido incluido en la página 14
SITE REQUIREMENTS 1.5 You must sweep and inspect the flue when the appliance is 1. FLUE OR CHIMNEY installed. 1.6 You must check the flue draught with all windows and 1.1 The flue or chimney system must be in good condition. doors closed and any extraction fans in this or adjoining It must be inspected by a competent person and passed for rooms running at maximum speed. (See next section for use with the appliance before installation additional ventilation requirements) Products of combus
Resumen del contenido incluido en la página 15
SITE REQUIREMENTS 2. FLUE OUTLET POSITIONS IMPORTANT: Seek specialist advice if installing in a dwelling with a thatched roof Horizontal Terminal Measurement Flue 150mm Vertical max Measurement Adjacent Building Insulation The vertical measurement is the lowest from either the point of discharge or 150mm above insulation. Position On Roof Minimum Clearances On ridge or within 600mm 600mm above ridge A Elsewhere on roof 2300mm horizontally from roof surface and: B a) 1000mm above highest p
Resumen del contenido incluido en la página 16
SITE REQUIREMENTS 4.2 The structure of the builders opening will reach high 4. BUILDERS OPENING temperatures. Use insulating blockwork to reduce the heat transfer to the external walls, in particular the area of the chimney breast above the opening. To make installation easier make the opening larger than the minimum requirements where possible. 4.3 Take care when finishing the chimney breast and surrounding area. The conducted and convected heat emitted by the appliance could be high eno
Resumen del contenido incluido en la página 17
PRE-INSTALLATION CHECKS 1. VENTILATION Model mm 200 200 200 200 200 Without liner system (round) minimum dimension (diameter.) inch 8 8 8 8 8 mm 185 185 185 185 185 Without liner system (square) Flue/Chimney Size minimum dimension inch 7 1/4 7 1/4 7 1/4 7 1/4 7 1/4 Liner or factory made system mm 200 200 200 200 200 (diameter.) inch 8 8 8 8 8 installed in accordance with manufacturers instructions Do not connect to systems containing large voids or over 9" (230mm) square/round m 4.5 4.5 4.5
Resumen del contenido incluido en la página 18
PRE-INSTALLATION CHECKS 2. ADDITIONAL VENTILATION 2.2 Extractor fans or cooker hoods should not be placed in the 2.1 Open appliances require additional ventilation to comply same room or space as the appliance. with the requirements of the Building Regulations. This should be provided using a permanently open air vent, of 2.3 If any of these checks reveal problems do not proceed the size listed, which is positioned so that it is not liable to with the fitting of the appliance until they
Resumen del contenido incluido en la página 19
INSTALLATION INSTRUCTIONS 1 LEGAL REQUIREMENTS Before installation of this product please read these instructions fully. It is very important to understand the requirements of the national Building Regulations* and standards**, along with any local regulations and working practices that may apply. Should any conflict occur between these instructions and these regulations then the regulations must apply. Your local Building Control Office can advise regarding the requirements of the regulat
Resumen del contenido incluido en la página 20
INSTALLATION INSTRUCTIONS • Lift over frame 3 6 PR8079 2A. FITTING OF FUEL KITS - LOG PR8073 2.1 Install the relevant fuel box. 2.4 Fit the Contemporary Log Bar, Diagram 7 4 • Slide into channels in front of the logbox The removable frame plate is not shown for clarity but must be in place before the Log Bar is fitted, See Section 3A. 7 PR8080 2.2 Fit the Log Retainer (Holyrood, Castle, Portcullis), Diagram 5. Note: the Holyrood retainer has a specially curved log- PR80
