Manual de instrucciones de Xpelair PX9

Resumen del contenido incluido en la página 1

Do’s and don’ts
• Do read the entire instruction leaflet before commencing installation.


• Do install each fan with a double pole-isolating switch.

• Do make sure the mains supply is switched off before attempting to make electrical

connections or carry out any maintenance or cleaning
PX6, PX9 and PX12 Commercial ceiling fans

Guarantee


Customers outside UK – see international below.

• UK: The fan is guaranteed against defects for 2 years from the date of purchase.

Resumen del contenido incluido en la página 2

2 7

Resumen del contenido incluido en la página 3

5. Preparing the hole Installing the Fan If working above ground floor level, appropriate safety precautions must be observed. These appliances are intended for connection to fixed wiring. G1 WARNING: EYE PROTECTION MUST BE WORN DURING ALL DRILLING Check that the electrical rating shown on the fan match es the mains supply. OPERATIONS. WARNING: THESE APPLIANCES MUST BE EARTHED. For Installing in a panel /ceiling All installations must be supervised by a qualified electri

Resumen del contenido incluido en la página 4

6. Insert four screw covers (packed separately) in the fixing holes in the Inner Grille. When removing the covers, place a 3mm blade electrician’s screwdriver into the slot and lever off the cover. C D 7. Switch off the mains electrical supply and remove fuses. 8. Connect the cable from isolation switch to the electrical supply wiring. 9. Replace the fuses, and switch on the mains electrical supply. For fixed wiring circuits the protective fuse for the appliance must not excee