Resumen del contenido incluido en la página 1
English Español
For Your Records and
Warranty Assistance
T T Type 2 Models ype 2 Models ype 2 Models
For reference, also attach your receipt or a copy
of your receipt to the manual.
Owner’s Guide and Installation Manual
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 42693-01
20091111
©2009 Hunter Fan Co.
Resumen del contenido incluido en la página 2
Welcome Your new Hunter ceiling fan is an addition to your home or office that ® will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your fan. We are proud of our work. We appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world. Before installing your fan, for your records and warranty assistance, record information from the carton and Hunter namepl
Resumen del contenido incluido en la página 3
Preparing the Fan Site Step 1 - Choose the Fan Site Proper ceiling fan location and attachment to the building structure are essential for safety, reliable operation, maximum efficiency, and energy savings. 30” From 8’ Minimum Choose a fan site where: Wall or Ceiling Nearest • No object can come in contact with the rotating fan blades during Obstruction 7’ Minimum Height normal operation. Blades to Floor • The fan blades are at least 7 feet above the floor and the ceiling is at least 8
Resumen del contenido incluido en la página 4
Preparing the Fan Site (continued) Step 2 - Cut the Ceiling Hole 2-1. Locate the site for the ceiling hole directly below the joist or support brace that will hold the outlet box and fan. 2-2. Cut a 4” diameter hole through the drywall or plaster of the ceiling. You will use the hole to install the support brace and outlet box. Step 3 - Install a Support Brace, If Necessary Determine if there is a ceiling joist directly above the ceiling hole. If the joist is there, determine if it is positio
Resumen del contenido incluido en la página 5
Installer’s Choice and Optional Accessories Understanding Mounting and Installer’s Choice® Support Brace Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profile, Standard, or Angled mounting. The steps in this manual include Ceiling Standard instructions for all three Installer’s Choice mounting methods. Outlet Box Mounting Style Co
Resumen del contenido incluido en la página 6
1 • Getting Ready To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling. • Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: • Electric drill with 9/64” bit • Standard screwdriver (magne
Resumen del contenido incluido en la página 7
2 • Installing the Ceiling Plate CAUTION: To avoid possible electrical shock, before installing your fan, Toward disconnect the power by turning off the circuit breakers to the outlet box Ceiling Peak and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel. 2-1. Drill two pilot holes into the wood support structure through the outermost holes in the outlet box. The pi
Resumen del contenido incluido en la página 8
3 • Assembling and Hanging the Fan WARNING: Fan may fall if not assembled as directed in these Standard or Angled Mounting installation instructions. Steps 3-2 – 3-3 3-1. Unbundle the wires from the fan. Downrod For Standard or Angled mounting: 3-2. Insert the downrod through the canopy and canopy trim ring. Canopy Feed the wires from the fan through the downrod on one side of the pin in the ball. Canopy 3-3. Loosen the square head setscrew on the adapter to install the pipe Setscr
Resumen del contenido incluido en la página 9
4 • Wiring the Fan All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. 4-1. Make sure the power is still off. A C 4-2. To connect the wires, hold the bare metal leads together and place a wire connector over them, then twist clockwise until tight. For B all these connections use the wire connectors provided. CAUTION: Be sure no bare wire or wire strands are visible after making conn
Resumen del contenido incluido en la página 10
5 • Setting the Remote Transmitter and Receiver You must now set the jumpers in the remote Example DIP Switch Settings transmitter and DIP switches in the receiver so that Receiver 2 Receiver 2 they match. Setting DIP switches and Jumpers Dip Switches Dip Switches DIP Switches DIP Switches Set to 01110 Set to 01001 When two or more fans are located near each other, you Set to 0100 Set to 0111 may desire to have the receiver/transmitter for each fan Transmitter 1 Transmitter 2 set to a differ
Resumen del contenido incluido en la página 11
6 • Installing the Canopy and Canopy Trim Ring WARNING: Failure to complete the following steps could cause the fan Step 6-1 to fall. Note: It is recommended you use a magnetic tip screwdriver for the following steps. Tab 6-1. Rotate the hanger ball so the tab in the canopy is secure in the hanger ball groove. Note: Your fan may have multiple tabs and Groove grooves that must be aligned. 6-2. Swing the fan up to align the canopy screw holes with the mounting holes on the ceiling plate.
Resumen del contenido incluido en la página 12
7 • Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 7-1. Your fan may include blade grommets. If your fan has grommets, Step 7-1 (Detail) insert them by hand into the holes on the blades. 7-2. Attach each blade to a blade iron using three blade assembly screws. If you used grommets, the blades may appear slightly loose after screws are tightened. This is normal. 7-3. Remove the blade mounting screws and rubber shipping bumper
Resumen del contenido incluido en la página 13
8 • Completing Your Installation With or Without a Bowl Light Fixture Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan with OR without the included light fixture. The steps below direct you whether or not you are installing a light fixture. WARNING: Use only the light fixture supplied with this fan model. 8-1. To attach the upper switch housing, partially install two
Resumen del contenido incluido en la página 14
8 • Completing Your Installation With or Without a Bowl Light Fixture (Continued) 8-6. To attach the lower switch housing, connect the upper plug connector from the motor to the lower plug connector in the lower switch housing assembly. Note: Both plug connectors are polarized and will only fit together Plug one way. Make sure the connectors are properly aligned before Connector connecting them. Incorrect connection could cause improper operation and damage to the product. 8-7. Place th
Resumen del contenido incluido en la página 15
8 • Completing Your Installation With or Without a Bowl Light Fixture (Continued) Installing the Glass Bowl 8-8. First install B10 candelabra bulbs (60 Watt Maximum) into the sockets. 8-9. Thread the light and fan pull chains through the hole in the center of the glass bowl. Then, thread the light pull chain through the hole in the center of the cover plate. 8-10. Thread the fan pull chain through the grommet hole in the side of the cover plate. 8-11. Place the cover plate up against the
Resumen del contenido incluido en la página 16
8 • Completing Your Installation With or Without a Bowl Light Fixture (Continued) Uninstalling the Light Fixture 8-14. To uninstall the light fixture, first disconnect the plug connectors between the black wire and the red wire. 8-15. Disconnect the plug connectors between the two white wires. 8-16. Remove the two screws attaching the light kit to the lower switch housing. 8-17. Remove the light fixture from the lower switch housing, pulling disconnected wires through the hole in the center o
Resumen del contenido incluido en la página 17
9 • Operating and Cleaning Your Ceiling Fan 9-1. Turn on electrical power to the fan. 9-2. The fan pull chain controls power to the fan. The pull chain has four settings in sequence: High, Medium, Low, and Off. • Pull the chain slowly to change settings. • Release slowly to prevent the chain from recoiling into the blades. • The chain uses a breakaway connector that separates if the chain is jerked. If this happens, simply reinsert the chain into the connector. 9-3. The light pull chain cont
Resumen del contenido incluido en la página 18
10 • Operating the Remote Control 10-1. The remote transmitter has individual buttons for turning the fan and the light off and on. 10-2. Use the Light buttons to turn the Light On and Off. 10-3. Use the Fan buttons to turn the Fan On and Off. Light Off Light On 10-4. When necessary, replace the battery with a 12-volt type 23A, MN-21 battery or equivalent. Fan Off Fan On Steps 10-2 – 10-3 Step 10-4 18 42693-01 • 11/11/09 • Hunter Fan Company
Resumen del contenido incluido en la página 19
11 • Troubleshooting Problem: Nothing happens; fan does not move. 1. Turn power on, replace fuse, or reset breaker. 2. Loosen canopy, check all connections according to the wiring the fan section. 3. Check the plug connection in the switch housing. 4. Push motor reversing switch firmly left or right to ensure that the switch is engaged. 5. Pull the pull chain to ensure it is on. 6. Remove the shipping bumpers. Problem: Noisy operation. 1. Tighten the blade assembly screws and blade iron armatu
