Manual de instrucciones de Emerson CF875

Resumen del contenido incluido en la página 1

READ AND SAVE THESE INSTRUCTIONS
™
CRYSTAL LX
Model No.
Ceiling Fan
CF875SPB00
Owner's Manual
Net Weight: 21.3 Lbs.
LIMITED WARRANTY
What The Warranty Covers:
This warranty covers the motor and the other components and accessories of your Emerson ceiling fan against all defects in workmanship and materials.
You must be the original purchaser or user of the product to be covered.
What The Period Of Coverage Is:
As it applies to the motor, this warranty will last for a lifetime of your ceiling fan

Resumen del contenido incluido en la página 2

! WARNING WARNING: To avoid fire, shock, and serious personal injury, follow these instructions. Safety Instructions 1. Read your owner’s manual carefully and keep it for future reference. 2. Before servicing or cleaning unit, switch power off at service panel and lock service panel disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a warning device, such as a tag, to the service panel. 3. Be careful of

Resumen del contenido incluido en la página 3

This Manual Is Designed to Make it as Easy as Possible for You to Assemble, Install, Operate and Maintain Your Ceiling Fan Installed Wire Length Wire Size A.W.G. Tools Needed for Assembly Up to 50 ft. 14 One Phillips head screwdriver 50 - 100 ft. 12 One 1/4" blade screwdriver One stepladder One wire stripper ! WARNING Four 60-watt (maximum) intermediate base bulbs Before assembly your ceiling fan, refer to section on Four 7-watt (maximum) candelabra base bulbs proper method of wiring your fan (p

Resumen del contenido incluido en la página 4

Electrical Requirements Your new ceiling fan will require a grounded electrical WARNING ! supply line of 120 volts AC, 60 Hz, 15 amp circuit. The outlet box must be securely anchored and capa- Turning off wall switch is not sufficient. To avoid possible electrical shock, be sure electricity is ble of withstanding a load of at least 50 pounds. turned off at the main fuse box before wiring. All wiring must be in accordance with National and ! WARNING Local codes and the ceiling fan must be properl

Resumen del contenido incluido en la página 5

How To Wire Your Ceiling Fan 2. Securely connect the motor orange wire to the If you feel that you do not have enough wiring mounting plate/light fitter orange wire using wire knowledge or experience, have your fan installed connector supplied. (Figure 5). by a licensed electrician. 3. Securely connect the fan motor white wire and the ! WARNING mounting plate/light fitter white wire to the supply white (neutral) wire using wire connector supplied. To avoid possible electrical shock be sure elect

Resumen del contenido incluido en la página 6

4. Attach one blade assembly to the motor using two ! WARNING 1/4-20 x 1/2” phillips head blade flange screws (Figure 8). Make sure the screws are tightened To avoid possible fire or shock, do not pinch wire securely. Repeat this procedure for the other four between the switch housing light fitter and the plate. blade assemblies. NOTE: Take care not to scratch the fan housing when installing the blade assemblies. CRYSTAL GLASS HOUSING SWITCH HOUSING FAN BLADE PLATE SWITCH HOUSING/ 5/32 x 1/4" LI

Resumen del contenido incluido en la página 7

Using Your Ceiling Fan 1. Restore electrical power to the electrical box by turn- reversing switch to opposite position, and turn fan on ing the electricity on at the main fuse box or circuit again. The fan blades will turn in the opposite direc- breaker panel. tion and reverse the airflow. 2. Check the operation of the fan by gently pulling on the 4. Check the operation of the light fixture by gently fan switch pull chain. pulling on the light switch pull chain. Your fan model is equipped with

Resumen del contenido incluido en la página 8

Repair Parts Listing Accessories 1. Emerson speed controls (see store or catalog). Part Number Key Model. ! WARNING No. Description CF875SPB00 1 Switch Housing/Light Fitter To reduce the risk of fire or electrical shock, do not Assembly 761653 use fan with any solid-state speed control device. 2 Glass Shade (set of 4) 761656 3 Flange Assembly 761652 WARNING ! (set of 5) 4 Blade Assembly 761548 The use of any other control not specifically (set of 5) approved for this fan could result in fire, sh