Manual de instrucciones de Emerson CF704AW02

Resumen del contenido incluido en la página 1

READ AND SAVE THESE INSTRUCTIONS
42" Model No.
CF704W02 CF704WPB02
CF704PB02 CF704WW02
CF704AB02 CF704AW02
Net Weight: 11.1 Lbs.
36" Model No. 29" Model No.
CF703WW02 CF702WW03
CF703PB02 CF702PB03
Net Weight: 11.1 Lbs. Net Weight: 10.5 Lbs.
by
®
Ceiling Fan
Owner's Manual
LIMITED WARRANTY
What The Warranty Covers:
This warranty covers the motor and the other components and accessories of your Emerson ceiling fan against all defects in workmanship and materials. You must be
the original purcha

Resumen del contenido incluido en la página 2

WARNING ! WARNING: To avoid fire, shock, and serious personal injury, follow these instructions. Safety Instructions 1. Read your owner’s manual carefully and keep it for future reference. 2. Before servicing or cleaning unit, switch power off at service panel and lock service panel disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a warning device, such as a tag, to the service panel. 3. Be careful of

Resumen del contenido incluido en la página 3

This Manual Is Designed to Make it as Easy as Possible for You to Assemble, Install, Operate and Maintain Your Ceiling Fan Installed Wire Length Wire Size A.W.G. Tools Needed for Assembly Up to 50 ft. 14 One Phillips head screwdriver One stepladder 50 - 100 ft. 12 One 1/4" blade screwdriver One wire stripper Three wire connectors (supplied) ! WARNING MATERIALS Before assembling your ceiling fan, refer to section on proper method of wiring your fan. If you feel you do not Wiring outlet box and bo

Resumen del contenido incluido en la página 4

2. Remove the three switch cup screws from the switch housing plate. Position the switch housing SWITCH HOUSING assembly on the switch housing plate and align the ASSEMBLY holes in the switch housing assembly with the holes in the plate. Secure the switch housing assembly by installing the three screws (Figure 2). ! WARNING MOUNTING To avoid possible fire or shock, do not pinch wires SCREWS (3) SWITCH HOUSING between the switch cup assembly and the switch Figure 2 PLATE 3. Pass the 80" motor l

Resumen del contenido incluido en la página 5

Electrical Requirements Your new ceiling fan will require a grounded electrical ! WARNING supply line of 120 volts AC, 60 Hz, 15 amp circuit. The outlet box must be securely anchored and capable of Turning off wall switch is not sufficient. To avoid withstanding a load of at least 50 pounds. possible electrical shock, be sure electricity is turned off at the main fuse box before wiring. All wiring must be in accordance with National and ! WARNING Local codes and the ceiling fan must be properly

Resumen del contenido incluido en la página 6

How To Wire Your Ceiling Fan If you feel that you do not have enough electrical outlet box, with the white and green leads on one wiring knowledge or experience, have your fan side of the outlet box and the black and blue leads installed by a licensed electrician. on the other side of the outlet box. ! WARNING ! WARNING To avoid possible electrical shock, be sure electricity Check to see that all connections are tight, including is turned off at the main fuse box before wiring. ground, and that

Resumen del contenido incluido en la página 7

! WARNING: FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX OR CIRCUIT BREAKER BEFORE TROUBLE SHOOTING YOUR FAN. Trouble Shooting TROUBLE PROBABLE CAUSE SUGGESTED REMEDY 1. Fan will not 1. Reversing switch in neutral position. 1. Make sure reversing switch position is all the start. way to one side. 2. Fuse or circuit breaker blown. 2. Check main and branch circuit fuses or circuit breakers. 3. Loose power line connections to the fan, or 3. Check line wire connections to fan and switch loose swi

Resumen del contenido incluido en la página 8

1 Repair Parts Listing (CF703 and CF702 Series) Part Number 2 Key Model No. Model No. Model No. Model No. 6 No. Description CF703WW02 CF703PB02 CF702WW03 CF702PB03 SCREWS (2) SUPPLIED WITH • Hanger Ball Assembly, 3 OUTLET BOX Consisting of: 760750-3 760750-1 760750-3 760750-1 1 Hanger Bracket – – – – 5 2 Hanger Ball – – – – 16 3 Downrod – – – – 7 • Parts Bag Containing: 761538-2 761538 761538-2 761538 9 5 Wire Connector (3) – – – – 8 6 Threaded Stud (2) – – – – 7 Lockwasher (2) – – – – 8 Knurl