Manual de instrucciones de Chromalox PF495-1

Resumen del contenido incluido en la página 1

Installation,Operation
4 H
and
(Supersedes PF495) PF495-1
RENEWAL PARTS IDENTIFICATION 161-304509-001
JANUARY, 2003
Industrial Wall Mounted Natural Convection
Space Heater - Type H
Specifications
Dimensions (In.)
Output Voltage Output Wt.
Model
(kW)(Vac)(BTUH) Lbs.
Width Height Depth
H-1801 1.0 120 2 20-3/4 7-1/2 4-1/2 28
H-1801 1.0 240 2 20-3/4 7-1/2 4-1/2 28
H-2405 1.5 120 2 26-1/2 7-1/2 4-1/2 30
H-2405 1.5 240 2 26-1/2 7-1/2 4-1/2 30
H-2405 1.5 480 2 26-1/2 7-1/2 4-1/2 30
H-2406 2.0 120 4 2

Resumen del contenido incluido en la página 2

MOUNTING 1. Locate heater position on wall. This unit has special baffle plates and vent holes in the cover to ensure sufficient convection currents. Make sure that the heater is mounted so that the mounting label located on the end cover points up (Fig. 1). 2. To locate mounting holes, see Specifications Table for heater in Fire Hazard question. In standard 16” stud center frame construction, locate • Not suitable for household or wall studding and locate 1 upper and 1 lower mounting hole in re

Resumen del contenido incluido en la página 3

WIRING Note: All wiring should be done in accordance with local codes and the National Electrical Code by a qualified person. 1. Electrical wiring enters heater case through 7/8” opening in end of ELECTRIC SHOCK HAZARD. Any installation involv- heater. ing electric heaters must be performed by a quali- 2. Grounding conductor, with green insulation, should be secured to fied person and must be effectively grounded in grounding screw located on case. accordance with the National Electrical Code to

Resumen del contenido incluido en la página 4

Limited Warranty: Please refer to the Chromalox limited warranty applicable to this product at http://www.chromalox.com/customer-service/policies/termsofsale.aspx. 2150 N. RULON WHITE BLVD., OGDEN, UT 84404 Phone: 1-800-368-2493 www.chromalox.com