Manual de instrucciones de Aube Technologies TH110A-SP-P

Resumen del contenido incluido en la página 1

INSTALLATION
NOTE : The "Problems and Solutions" section at the end of this user's guide will
help you to correct your problems during the installation.
This thermostat has been designed to operate with any installation
which has a RESISTIVE load not exceeding 2400 W (20 A) @ 120 VAC
such as electric baseboards, radiant ceilings and floors, electric con-
vectors, etc. It is not compatible with a low voltage controller used by
MODEL TH110A-SP-P (120 V)
a central heating system.
Electricians or e

Resumen del contenido incluido en la página 2

For savings to be obtained, you must lower the temperature for a period of 2 to 3 OPERATING MODES times the delay required to bring the temperature back to your comfort level. The TH110A-SP-P has two (2) operating modes. Example : If your system takes one hour to go from your saving temperature level to your comfort temperature Ievel, it is useless to lower the temperature for a period less than 2 to 3 hours. MANUAL ( ) This mode allows you to maintain a constant temperature in the room. a

Resumen del contenido incluido en la página 3

Temporary or permanent temperature bypass WARRANTY This operation allows you to temporarily modify the room temperature while you AUBE TECHNOLOGIES INC. ONE (1) YEAR LIMITED WARRANTY are in the Automatic mode. Simply press on or button to select the desired temperature, or the or button to select the Comfort or Econo settings you This product is warranted against material defects and workmanship in normal have programmed.This temperature will be maintained until the begin