Manual de instrucciones de Aprilaire 8061

Resumen del contenido incluido en la página 1

4. Remove the circuit board from the base by pulling back the
latch that holds it at the bottom center.
Installation Instructions
8061 TT Support Module
Application
The Aprilaire 8061 is designed to offer versatility in climate
control. A set of onboard dipswitches allows you to select
whether you want as many as two sensor inputs per support
module to control, monitor or even do a combination of both.
This temperature data is sent by digital communications back to
an Aprilaire 8870 Communicatin

Resumen del contenido incluido en la página 2

Multiple Support Module Installation Dipswitch 3 - Temperature Sensor 1 Each support module has two sensors, Sensor I and Sensor 2. up to 4 support modules can be connected to provide Determine whether you want the Sensor I input to monitor or temperature averaging in a large area or for several zones being control temperature. If dipswitch number 3 is in the "off' controlled by the same system. The maximum cumulative position, it will monitor the temperature. If the support distance between the

Resumen del contenido incluido en la página 3

Applications Specifications Power Supply: 18 to 30 V AC or DC (24 V Nominal) Heat Pump Applications Maximum Relative Humidity: 90% (non-condensing) If the support module is being used with a heat pump thermostat Max. Cable Length Between Module and TSTAT: lOOOft with auxiliary heat, the thermostat can be configured to disable The maximum cumulative distance between multiple the use of auxiliary heat during warm weather and to lock out support modules and the thennostat is 1000 ft. the compressor