Manual de instrucciones de Hunter Fan 44260

Resumen del contenido incluido en la página 1

®
Programmable Thermostat
Owners Manual Model 44260
M
AM
4
TEMP

Resumen del contenido incluido en la página 2

® 2 Congratulations! ® ENERGY STAR PARTNER Your new Hunter thermostat will provide years of reliable service. By saving energy, your thermo- ® As an ENERGY STAR Partner, Hunter Fan Co. has determined that this programmable thermostat stat will pay for itself during its first season of use. Thank you for buying a Hunter product! ® meets the ENERGY STAR guidelines for energy efficiency. Please read this manual for complete instructions on installing and operating your thermostat. If you require fu

Resumen del contenido incluido en la página 3

G Rc Rh Y/O W/B Y1 ® 3 ■ Position wallplate on wall and pull existing wires through large opening. Then level for ap- Wire Labeling (Continued) pearance. Mark holes for plastic anchors provided, if your existing holes do not line up with ■ After labeling wires, disconnect them from the existing thermostat terminals. those on the Hunter wallplate. ■ Remove existing wallplate. To make sure wires do not fall back into wall opening, you may ■ Drill holes with 3/16” bit and gently tap anchors into th

Resumen del contenido incluido en la página 4

HG HE ® 4 Wiring Diagrams Selector Switches In order for this thermostat to control your system, the system type must be specified by the 4-wire Heat/Cool System selector switches on the printed circuit board inside the thermostat. System Wallplate Jumper ■ Heating System Selector (HG - HE switch) Selector Terminals The factory position for this switch is in the “HG” position. Leave it in this position if you have – Rh Y/O STD HP G Rc W/B Y1 a gas furnace or an oil burner. If you have an elec

Resumen del contenido incluido en la página 5

® 5 Setting Day and Time (Continued) Cooling Day Program 1 Program 2 Program 3 Program 4 STEP 2: Monday – Time Time Time Time ■ Press again to change from hour setting to M Friday Temp Temp Temp Temp day/time minute setting. The current minute will be Saturday Time Time Time Time flashing. PM Temp Temp Temp Temp ■ Press to change the Minute up or down to Sunday Time Time Time Time the current minute. Temp Temp Temp Temp STEP 3: ■ Press again to change from minute setting Revising Programs M day/

Resumen del contenido incluido en la página 6

® 6 Reviewing Programs Filter Monitor Your thermostat measures the number of hours your heating and cooling system has been in program To review your program settings, press repeatedly to cycle through the programs. use. To maximize your system’s performance and energy efficiency, change or clean your filter regularly. You can also make changes at any time. ■ When the total system runtime for heat M T W TH F SA SU SET TEMP and cool reaches 400 hours, the Filter AM System Selector Switch Change

Resumen del contenido incluido en la página 7

® 7 Auto Recovery TROUBLESHOOTING ® Hunter’s Auto Recovery feature meets the ENERGY STAR guidelines for energy efficiency by Problem Solution allowing the heating or cooling system to recover gradually from an energy-saving setpoint temperature to a comfort setpoint temperature. No Display 1. Check battery connections and batteries. Auto Recovery calculates how early to turn your system back On, so that the room temperature is already comfortable by the start of the comfort temperature program p