Resumen del contenido incluido en la página 1
English
Owner’s Manual
Models
42122
5 MINUTE
42177
I N S T A L L A T I O N
Form# 44047-01
Non Programmable
20100413
©2010 Hunter Fan Co.
Resumen del contenido incluido en la página 2
Table Of Contents At A Glance Know Your Thermostat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 . . . . . . . . . . . . . . . . . . Setup Setting Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 . . . . . . . . . . . . . . . . . . . Features Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 . . . . . . . . . . . . . . . . . . . . . . . . . Menu Options . . . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 3
At A Glance 3 Know Your Thermostat Read this manual thoroughly. The following notes should help you with getting around your thermostat: • The thermostat temperature can be set in increments of 1°F (1°C). • After 15 minutes without a key press, the thermostat will return to the home display screen and save any changes you have made. If you need any assistance with installion or setup of your new Hunter Thermostat, please call us, our technical support staff is ready to help! USA: 1-888-830-1
Resumen del contenido incluido en la página 4
At A Glance 3 Know Your Thermostat 1. Allows access to the advanced features of the thermostat and saves changes to the menu options. 2. Adjusts time and temperature settings as well as moving up or down menu lists. 3. Indicates whether the system is set to Heat, Cool, or Off. 4. Indicates if the fan is set to Auto or On modes. 5. Allows you to switch between Heat, Cool, and Off modes. 6. Allows you to switch between fan Auto and On modes. 4 44047-01 • 04/13/2010
Resumen del contenido incluido en la página 5
At A Glance 3 Know Your Thermostat 1 2 4 3 5 6 5 ©2010 Hunter Fan Company
Resumen del contenido incluido en la página 6
At A Glance 3 Know Your Thermostat 1. Holds 2 “AA” Batteries. 2. HE/HG Switch - allows you to set your furnace to Gas/Oil or Electric, based on the type of system you have. 3. Allows your thermostat to operate your HVAC system* properly by indicating the system type that you have. *Conventional System: Uses a condensing unit for cooling and a separate furnace system for heating. *Heat Pump System: Uses the condensing unit for both heating and cooling. NOTE: If you are unsure of your system
Resumen del contenido incluido en la página 7
At A Glance 3 Know Your Thermostat 1 2 3 7 ©2010 Hunter Fan Company
Resumen del contenido incluido en la página 8
At A Glance 3 Know Your Thermostat 1. Indicates the current room temperature. 2. C will display when in Celsius mode. Nothing will display when set to Fahrenheit. 3. Low battery warning, replace the batteries in the thermostat. 4. Will show when your heat pump or system is reporting a problem to the thermostat. 5. Flashes when the furnace filter should be checked for replacement. 6. Indicates auxiliary heat on a heat pump is running. 7. Current operating mode, heat or cool. 8. Current Set temp
Resumen del contenido incluido en la página 9
o o At A Glance 3 Know Your Thermostat 2 C 3 1 4 Filter 5 Sys. 6 Aux Heat 9 7 8 Cool to Auto 10 9 ©2010 Hunter Fan Company
Resumen del contenido incluido en la página 10
Setup 4 Setting Temperature Once you install the batteries, the thermostat will display the home screen. 1. Set the system switch to Heat or Cool depending on your season. 2. Use the or button to activate the thermostat. 3. Press the or buttons again to adjust your set temperature. 4. Press when finished. The thermostat will show “Updated!” to confirm your settings are saved. Note: Follow this process anytime you need to make a change to your temperature. 10 44047-01 • 04/13/2010
Resumen del contenido incluido en la página 11
Setup 4 Setting Temperature 2-3 1 O Heat to Auto 4 Updated! 11 ©2010 Hunter Fan Company
Resumen del contenido incluido en la página 12
Features 6 Alerts This chapter will outline the various alerts the thermostat will report to you and how to respond to them. 1. Low Battery: This icon will appear when your batteries are starting to run low on power and should be changed to avoid system interruptions, (Figure 1) Change the batteries by gripping the sides of the thermostat firmly and pulling straight back, (Figure 1a). The batteries are located on the backside of the thermostat. The thermostat requires 2 (AA) batteries to o
Resumen del contenido incluido en la página 13
Features 6 Alerts 1a 1 O Heat to 1b 2 O Filter Heat to Auto 13 ©2010 Hunter Fan Company
Resumen del contenido incluido en la página 14
Features 6 Alerts 3. Auxiliary Heat: On multi-stage heat pumps this alert indicates your second stage heat is running. 4. Check System: Some heat pump systems are equipped with the ability to check system performance, indicated by the presence of an “L” wire attached to the backplate. This icon will flash on screen to alert the user that the heat pump is reporting a problem with the system. It may be necessary to have the heat pump checked or serviced by an HVAC technician. 14 44047-01
Resumen del contenido incluido en la página 15
Features 6 Alerts 3 4 O O Sys. Aux. Heat to Heat to Auto Auto 15 ©2010 Hunter Fan Company
Resumen del contenido incluido en la página 16
Features 6 Menu Options Under your menu options you have the ability to reset your filter counter, span settings, and temperature measurement. After making changes to each menu option, the thermostat will show “Updated”, save your changes, and move you back to the home screen. To access these options: 1. Press the button. 2. Once in the menu options list, use the or buttons to scroll through the menu items. The button will take you into the selected menu item. To escape menu options,
Resumen del contenido incluido en la página 17
Features 6 Menu Options 1 2 Filter Filter Span 1 Span 1 Span 2 Span 2 O O O O C C F/ F / 3 4 Filter Span 1 Span 1 Span 2 O O F / C 17 ©2010 Hunter Fan Company
Resumen del contenido incluido en la página 18
Features 6 Menu Options O Example: If your thermostat is set to turn on at 72 in heat mode, with O a span setting of 2, your thermostat will activate your furnace at 71 and O O shut it down when it reaches 73 . For cooling at 72 with a span of O O 2, your air conditioner will activate at 73 and shut down at 71 . This setting can be changed to 1, 2, or 3. 1 will shorten your running time while 3 will lengthen it. 5. SPAN 2: Unless you have a multi-stage conventional or heat pump system, th
Resumen del contenido incluido en la página 19
Features 6 Menu Options 5 6 Span 2 O O C F / 19 ©2010 Hunter Fan Company
Resumen del contenido incluido en la página 20
Features 6 Additional Features Power Failure Protection In the event that power is lost, the batteries will act as backup, saving your settings and programs. System Protection To protect your system from cycling, system turning on and off rapidly, your thermostat will prevent your system from turning back on for up to 3 minutes after it has been shut down. Reset In situations where your thermostat may not seem to be operating properly or if you just want to reset and start over, press and h
