Resumen del contenido incluido en la página 1
Operating
Manual
PRO 2000 Series
Programmable Thermostat
69-2608EFS-01
Resumen del contenido incluido en la página 2
This manual covers the following models: TH2110DH: For 1 Heat/1 Cool systems TH2210DH: For 2 Heat/1 Cool heat pump systems only (Pull thermostat from wallplate and turn over to find model number.) CAUTION: EQUIPMENT DAMAGE HAZARD. To prevent possible compressor damage, do not operate cooling system when outdoor temperature is below 50°F (10°C). Need Help? For assistance with this product please visit http://yourhome.honeywell.com or call Honeywell Customer Care toll-free at 1-800-468-1502 Rea
Resumen del contenido incluido en la página 3
PRO 2000 Table of contents About your new thermostat Appendices Thermostat features ...................................2 Battery replacement ................................16 Thermostat is preset, ready to go .............3 Customer assistance ...............................17 Quick reference to controls .......................4 In case of difficulty............................. 18–19 Quick reference to display ........................5 Limited warranty ......................................20
Resumen del contenido incluido en la página 4
ENGLISH Operating Manual About your new thermostat Your new Honeywell thermostat has been designed to give you many years of reliable service and easy-to-use, push-button climate control. Features • Backlit display is easy to r ead • Displays ambient (measur ed) temperatur e at all times • One-touch access to setpoint temperatur e • Pr eset pr ogram settings • T emporary and permanent override of schedule • Early start ensur es the right temperatur e at the r
Resumen del contenido incluido en la página 5
ENGLISH PRO 2000 This thermostat is ready to go! Your new thermostat is pre-programmed and ready to go. All you have to do is set the time and day. Then check the settings below and change if needed: 1. Set time and day (required for proper operation) .........................See page 6 2. Select system setting: Preset to Off ................................To change, see page 7 3. Select fan setting: Preset to Auto ...................................To change, see page 8 4. Program schedules:
Resumen del contenido incluido en la página 6
ENGLISH Operating Manual Quick reference to controls Set: Press to set time/ Screen Lit for 12 seconds when you press any button. day/schedule. Hold: Press to override programmed tempera- Temperature ture control. adjustment Run: Press to resume program schedule. Fan E.M. Heat Heat Off Cool Auto On System switch (see page 7) M32781 • Cool: Cooling system control. Fan Switch (see page 8) • Off: All systems off. On: Fan runs continuously. • Heat: Heating system control. Auto: Fan runs on
Resumen del contenido incluido en la página 7
ENGLISH PRO 2000 Quick reference to display screen Setpoint indicator Low battery warning Appears when the (see page 16) Lo setpoint temperature Batt is displayed. Set am : Current day/time 6 30 Temperature (see page 6) The ambient (measured) We 75 temperature is normally Heat Wake Current program period displayed. To view the On Wake/Leave/Return/Sleep setpoint temperature, (see pages 9-10) M32701 pr ess the Up or Down button once. The setpoint System status temperature will
Resumen del contenido incluido en la página 8
ENGLISH Operating Manual Set the time and day Press SET, then adjust time. 1. Press the SET button, then press s or t to set the clock time. Set Time 2. Press the SET button, then press s or : am 6 30 t to select the day of the week. 3. Press RUN to save & exit. M32702 Note: If the clock flashes, the thermostat will follow your settings for the Monday “Wake” time Press SET, then select current day. period until you reset the time and day. Set Day We M32703 69-2608EFS—01 6
Resumen del contenido incluido en la página 9
ENGLISH PRO 2000 Select the system setting The SYSTEM switch can be set to control your heating or cooling system, depend- ing on the season. • Cool: Cooling system control. • Off: All systems are off. • Heat: Heating system control. • Em Heat: Emergency & Auxiliary Fan E.M. Heat Heat Off Cool Auto On Heat control. Compressor is locked M32781 out. (Select models only.) CAUTION: EQUIPMENT DAMAGE Set SYSTEM switch to control the HAZARD. To prevent possible heating or cooling system.
Resumen del contenido incluido en la página 10
ENGLISH Operating Manual Select the fan setting Set the FAN switch to Auto or On. In “Auto” mode (the most commonly used setting), the fan runs only when the heat- ing or cooling system is on. If set to “On,” the fan runs continuously . Fan E.M. Heat Heat Off Cool Auto On M32781 Set FAN switch to choose whether the fan runs continuously or only as needed. 69-2608EFS—01 8
Resumen del contenido incluido en la página 11
ENGLISH PRO 2000 Save money by setting program schedules It’s easy to program your system for maximum energy savings. You can program four time periods each day, with different settings for weekdays and weekends. WAKE Set to the time you awaken and the temperature you want 6:00 am during the morning, until you leave for the day. ° 70 LEAVE Set to the time you leave home and the temperature you 8:00 am want while you are away (usually an energy-saving level). ° 62 RETURN Set to the time you
Resumen del contenido incluido en la página 12
ENGLISH Operating Manual A En bo er ug t y yo sa ur v in ne g w se tthe tin rg mo s f so tr atmaximum cost savings This thermostat is pre-set to use energy saving program settings. We recommend these settings, since they can reduce your heating/cooling expenses by as much as 33%. (See next page to adjust times and temperatures of each time period.) Heat (Mon-Fri) Cool (Mon-Fri) Heat (Sat-Sun) Cool (Sat-Sun) Wake ° ° ° ° (6:00 am) 70 78 70 78 Leave ° ° ° ° (8:00 am) 62 85 62 85 Return ° ° ° °
Resumen del contenido incluido en la página 13
ENGLISH PRO 2000 A To bo ad utj u yst our p rne ogr wa t m he src mo hed stu altes Press SET 3 times, then adjust time. 1. Press SET until Set Schedule is displayed. 2. Press s or t to set your weekday Wake time (Mo-Fr), then press SET. 3. Press s or t to set the temperature for this Set am time period, then press SET. : 6 30 Mo Tu We Th Fr 4. Set time and temperature for the next time 75 Wake period (Leave). Repeat steps 2 and 3 for each Set Schedule weekday time period. M32706 5. Press SE
Resumen del contenido incluido en la página 14
ENGLISH Operating Manual Program schedule override (temporary) Press to temporarily adjust temperature. Press s or t to immediately adjust the temperature. This will temporarily override Temporary the temperature setting for the current Set : am 6 30 time period. 70 “Temporary” will appear on the display Wake and the current program period will flash. M32708 Press to cancel temporary setting and The new temperature will be maintained resume program schedule. only until the next programmed
Resumen del contenido incluido en la página 15
ENGLISH PRO 2000 Program schedule override (permanent) Press to permanently adjust temperature. Press HOLD to permanently adjust the temperature. This will override the Set temperature settings for all time periods. : am Hold 6 30 70 The “Hold” feature turns off the program schedule and allows you to adjust the M32710 thermostat manually, as needed. Press to cancel “Hold” setting and resume Whatever temperature you set will be program schedule. maintained 24 hours a day, until you manuall
Resumen del contenido incluido en la página 16
ENGLISH Operating Manual Built-in compressor protection This feature helps prevent damage to the compressor in your air conditioning or heat pump system. : am 6 30 Damage can occur if the compr essor is We 75 restarted too soon after shutdown. This fea- Cool Wake ture forces the compressor to wait 5 minutes On before restarting. M32711 During the wait time, the display will flash the message Cool On (or Heat On if you have Message flashes until safe restart a heat pump).
Resumen del contenido incluido en la página 17
ENGLISH PRO 2000 Early Start Early Start: This feature allows the heating or cooling to turn on before the program start time, so the temperature is reached at the : am 6 30 time you set. For example: Set the Wake time We to 6 am, and the temperature to 70°. The heat 75 will come on before 6 am, so the temperature Cool Wake On is 70° by the time you wake at 6. The next time period is displayed when the system is M32712 activated before a scheduled time period. 15 69-2608EFS—01
Resumen del contenido incluido en la página 18
ENGLISH Operating Manual B Abo attu etr y y o rur epl ne acw em the enrtmostat Pull at bottom to Install two fresh AAA batteries when remove thermostat Lo Batt flashes on the screen. Lo from wallplate. Batt appears for 60 days before the batteries are depleted. W/ Not Aux Used Turn thermostat over, Replace batteries once a year, or insert fresh AAA alkaline when you will be away for more than batteries, then reinstall a month. thermostat. Most settings are stored in non- volatile (perma
Resumen del contenido incluido en la página 19
ENGLISH PRO 2000 C Abo ust uo tm yo eur r a ne ssist w a the ncre mostat Pull at bottom to For assistance with this product, please remove thermostat visit from wallplate. http://yourhome.honeywell.com. W/ Not Aux Used Or call Honeywell Customer Car e toll-fr ee at 1-800-468-1502. To save time, please note your model Turn thermostat over number and date code before calling. to find model number and date code. Fan E.M. Heat Heat Off Cool Auto On M32782 XXXX M32831 17 69-2608EFS—0
Resumen del contenido incluido en la página 20
ENGLISH Operating Manual In case of difficulty If you have difficulty with your thermostat, please try the following suggestions. Most problems can be corrected quickly and easily. Display is blank • Check cir cuit br eaker and r eset if necessary . • Make sur e power switch at heating & cooling system is on. • Make sur e fur nace door is closed secur ely . • Make sur e fr esh AAA alkaline batteries ar e corr ectly installed (see page 16). • Set system sw
