Resumen del contenido incluido en la página 1
OWNER’S MANUAL
Model GTT342
Mfg. ID No. 96072001100
Product No. 960 72 00-11
42 Inch Mower
Grass Catcher
Assembly
Operation
Customer Responsibilities
Repair Parts
532402705 11.17.05 rad
Printed in U.S.A.
03021
Resumen del contenido incluido en la página 2
SAFETY RULES Safe Operation Practices for Ride-On Mowers IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROW ING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. Data indicates that operators, age 60 years and above, are involved in a large percentage of riding mower-related injuries. WARNING: In order to prevent ac- These operators should evaluate their ability to operate the ci den tal starting w
Resumen del contenido incluido en la página 3
SAFETY RULES Safe Operation Practices for Ride-On Mowers Never make any adjustments or repairs with the engine run- IV. TOWING ning. Tow only with a machine that has a hitch designed for towing. Check grass catcher components and the discharge guard Do not attach towed equipment except at the hitch point. frequently and replace with manufacturer's recommended Follow the manufacturer's recommendation for weight limits parts, when necessary. for towed equipment and tow
Resumen del contenido incluido en la página 4
KNOW YOUR GRASS CATCHER READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE ASSEMBLING OR OPERATING YOUR GRASS CATCH ER. Compare the illustrations with the carton contents to familiarize yourself with the parts before starting the assembly. Study the operating instructions and safety precautions thoroughly to insure proper functioning of your Grass Catcher and to prevent injury to yourself and others. Save this manual for future reference. The operation of any tractor can result in foreign obje
Resumen del contenido incluido en la página 5
02051 02543 ASSEMBLY BAGGER SUPPORT ASSEMBLY CONTAINER ASSEMBLY (See Fig. 3) (See Fig. 1) 1 3 1. Slide fl anges of support assembly into drawbar slots 1. Place bottom half inside of top half, as shown. fi rst, then, pivot backwards inserting pin into drawbar 2. Place one foot inside bottom half and lift top half to pin hole. meet bottom half. 2. Be sure support assembly is seated properly, then 3. Press halves tightly together while lifting top to lock secure with retain
Resumen del contenido incluido en la página 6
03022 CONTAINER MOUNTING (See Fig. 4) 4 1. Install one container to left side fi rst with warning to COVER LATCH outside of unit. Install another container to center HANDLES position and one in right position. NOTE: Right con tain er should always over lap left con tain er at center supports. 2. Close cover and lock latch handles over center support tubes. CONTAINER WARNING CENTER SUPPORT TUBES CONTAINER CONTAINER WARNING HANDLE FIG. 4 LOWER CHUTE (See Fig. 5) 5 DEFLECTOR SHIELD 1.
Resumen del contenido incluido en la página 7
UPPER CHUTE (See Figs. 6A & 6B) LEVEL MOWER 6 7 1. Lower mower to its lowest cutting position. Be sure mower is properly leveled for best mower per for man ce. See your tractors owner's manual for 2. Assemble upper chute by inserting curved end into ins truc tions hole in back of cover. NOTE: Handle carefully so as not to damage full bagger indicator. 3. Push in and turn upper chute until it is in line with lower chute. 4. Align the bosses on lower chute with alignment sl
Resumen del contenido incluido en la página 8
OPERATION Avoid cutting wet grass or in the morning while the dew TIPS FOR IMPROVED BAGGING is still heavy. Grass clippings collected under these OPE RATION: conditions tend to be sticky and adhere to the walls of Follow the mower operation instructions in your tractor the fl ow path causing clogging. owner's manual. Your bagger is equipped with a full bagger indicator. Movement of the wheel increases as the bags fi ll. The When operating your grass catcher on a lawn where grass
Resumen del contenido incluido en la página 9
CUSTOMER RESPONSIBILITIES STORAGE GENERAL RECOMMENDATIONS When grass catcher is to be stored for a period of time, Always observe safety rules when performing any main- clean it thoroughly, remove all dirt, grass, leaves, etc. Store te nance. in a clean, dry place. Before each use check for loose fasteners. Clean unit thoroughly after each use. CAUTION: Do not leave grass in bagger containers. Empty containers after each BLADE CARE use and before storing. Failure to do so may
Resumen del contenido incluido en la página 10
cracked or damaged. Use only a recommended replacement container. subject to wear and detierioration. Check bag frequently. Replace when Do not operate mower unless container is properlyis nstalled.Container is WARNING 10 REPAIR PARTS GRASS CATCHER - MODEL GTT342 (MFG. ID 96072001100) / RAMASSE-HERBE - MODÈLE GTT342 (MFG ID 96072001100) PRODUCT NUMBER 960 72 00-11 / NO. DE PRODUIT 960 72 00-11 4 5 6 7 8 10 12 13 9 2 9 11 14 2 18 20 20 15 38 16 38 34 15 9 12 20 37 14 3 16 20 33 26 32 35 31 33 27
Resumen del contenido incluido en la página 11
11 REPAIR PARTS GRASS CATCHER - MODEL GTT342 (MFG. ID 96072001100) / RAMASSE-HERBE - MODÈLE GTT342 (MFG ID 96072001100) PRODUCT NUMBER 960 72 00-11 / NO. DE PRODUIT 960 72 00-11 KEY PART DESCRIPTION KEY PART DESCRIPTION NO. NO. NO. NO. 18 532162603 Chute, Lower Glissière inférieure 2 532069180 Nut, Crownlock #10-24 Écrou auto-serrant #10-24 20 871161010 Screw #10
