Resumen del contenido incluido en la página 1
OWNER’S MANUAL
Model LTT354
Mfg. ID No. 96072001200
Product No. 960 72 00-12
54 Inch Mower
Grass Catcher
� Assembly
� Operation
� Customer Responsibilities
� Repair Parts
406288 06.05.06 rad
Printed in U.S.A.
03021
Resumen del contenido incluido en la página 2
SAFETY RULES Safe Operation Practices for Ride-On Mowers IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROW ING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. � Data indicates that operators, age 60 years and above, are involved in a large percentage of riding mower-re- WARNING: In order to prevent ac- lated injuries. These operators should evaluate their ci den tal starting when setting up, abilit
Resumen del contenido incluido en la página 3
SAFETY RULES Safe Operation Practices for Ride-On Mowers IV. TOWING � If you strike a foreign object, stop and inspect the machine. Repair, if necessary, before restarting. � Tow only with a machine that has a hitch designed for � Never make any adjustments or repairs with the engine towing. Do not attach towed equipment except at the running. hitch point. � Check grass catcher components and the discharge � Follow the manufacturer's recommendation for weight guard frequent
Resumen del contenido incluido en la página 4
KNOW YOUR GRASS CATCHER READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE ASSEMBLING OR OPERATING YOUR GRASS CATCH ER. Compare the illustrations with the carton contents to familiarize yourself with the parts before starting the assembly. Study the operating instructions and safety precautions thoroughly to insure proper functioning of your Grass Catcher and to prevent injury to yourself and others. Save this manual for future reference. The operation of any tractor can result in foreign obje
Resumen del contenido incluido en la página 5
ASSEMBLY MOUNTING COVER ASSEMBLY TO BAGGER SUPPORT ASSEMBLY 1 SUPPORT ASSEMBLY (See Fig. 2) 2 NOTE: For ease of assembly, you may wish to obtain the 1. Align support assembly pin with hole in drawbar and as sis tance of another person for mounting cover assembly hang assembly over the shoulder bolts. to tractor. 2. Be sure support assembly is seated properly and secure 1. Position cover assembly on ground behind tractor. with retainer spring supplied. 2. Lift and rotat
Resumen del contenido incluido en la página 6
03022 CONTAINER MOUNTING (See Fig. 4) CONTAINER ASSEMBLY (See Fig. 3) 3 4 1. Install one container to left side fi rst with warning to 1. Place bottom half inside of top half, as shown. outside of unit. Install another container to center 2. Place one foot inside bottom half and lift top half to position and one in right position. meet bottom half. NOTE: Right con tain er should always over lap left con tain er 3. Press halves tightly together while lifting top to lock at center s
Resumen del contenido incluido en la página 7
02783 LOWER CHUTE (See Fig. 5) UPPER CHUTE (See Figs. 6A & 6B) 5 6 1. Raise and hold defl ector shield in upright position. 1. Lower mower to its lowest cutting position. 2. Place slot in lower chute over tab on mower and position 2. Assemble upper chute by inserting curved end into lower chute over mower opening as shown. hole in back of cover. 3. Hook rear latch into fl ange hole on back of mower. NOTE: Handle carefully so as not to damage full bagger 4. Hook front latch into
Resumen del contenido incluido en la página 8
OPERATION � Avoid cutting wet grass or in the morning while the dew TIPS FOR IMPROVED BAGGING is still heavy. Grass clippings collected under these OPE RATION: conditions tend to be sticky and adhere to the walls of Follow the mower operation instructions in your tractor the fl ow path causing clogging. owner's manual. � Your bagger is equipped with a full bagger indicator. Movement of the wheel increases as the bags fi ll. The When operating your grass catcher on a lawn where grass
Resumen del contenido incluido en la página 9
CUSTOMER RESPONSIBILITIES STORAGE GENERAL RECOMMENDATIONS When grass catcher is to be stored for a period of time, Always observe safety rules when performing any main- clean it thoroughly, remove all dirt, grass, leaves, etc. Store te nance. in a clean, dry place. � Before each use check for loose fasteners. � Clean unit thoroughly after each use. CAUTION: Do not leave grass in bagger containers. Empty containers after each BLADE CARE use and before storing. Failure to do so may
Resumen del contenido incluido en la página 10
cracked or damaged. Use onlya recommended replacement container. subject to wear and detierioration. Check bag frequently. Replace when Do not operate mower unless container is properlyis nstalled.Container is WARNING 10 REPAIR PARTS/PIÈCES DE RECHANGE GRASS CATCHER - MODEL LTT354 (MFG. ID 96072001200) / RAMASSE-HERBE - MODÈLE LTT354 (MFG. ID 96072001200) PRODUCT NO. 960 72 00-12 / NUMÈRO DE PRODUIT 960 72 00-12 4 5 6 7 8 2 10 12 9 13 9 2 11 14 38 18 38 20 20 15 34 20 37 3 15 9 20 12 14 33 26 3
Resumen del contenido incluido en la página 11
11 REPAIR PARTS/PIÈCES DE RECHANGE GRASS CATCHER - MODEL LTT354 (MFG. ID 96072001200) / RAMASSE-HERBE - MODÈLE LTT354 (MFG. ID 96072001200) PRODUCT NO. 960 72 00-12 / NUMÈRO DE PRODUIT 960 72 00-12 KEY PART DESCRIPTION KEY PART DESCRIPTION NO. NO. NO. NO. 2 532069180 Nut, Crown lock #10-24 Écrou auto-serrant #10-24 20 871161010 Screw #10-24 x 5/8 Vis #10-24 x 5/8 3 532192709 Screen, Cover